bongus

From everything I read on this thread, it appears to be an installation problem. Connecting the speed sensor wire will not effect the bypass. Connecting the wire will give you more precise nav functionality. Uses vehicle speed and satellite positioning to improve nav.

Very good idea.

Well...the quick answer is NO . The good news is there exists a functional bypass method but it WILL REQUIRE removal of the unit so that you can access the correct grounding points. Get ready to do some work. I have a Z1 and I did the HDD upgrade so I know what you're up against. Good luck.

Well, you have the correct map version. Does the bezel around the screen have Z3 on it? You can always update the CDDB when that update comes up. How large is your HDD? You can remove the HDD fairly easily to verify the size and brand of the HDD.

I'd agree...you'll save close to 50% if you buy one of Garrettomey's drives. He has received good feedback from users in this forum.

This post probably belongs in the Classified section...it looks like you don't have enough posts to place it there. I agree with the above post, a bit high. You may want to include actual pictures in your listing. The ones pulled from the Pioneer site are good for reference but if I were considering this purchase, I would like to see pictures of the actual units.

Yessir...you'll need the nd-bt1 to access the phone menu. I have a Z1 upgarded to t a Z3 and if I hold the Menu button the Phone menu comes up...but I also have the nd-bt1 installed.

If the night time background does not come up with the lights turned on then most likely it is your illumination connection. It maybe a hardware issue.

I agree that the drives are great. I installed mine and also changed the FC hack to the two-wire hack. Everything works great. I started with a Z1 and now it is a Z3. I refer all my Z* friends of this great resource. I would not hesitate buying from Garrett again. I like that I have more HD space for more music.

Sure can...it should not be a problem. To be safe confirm what other equipment will be powered by the same line.

Bump...well said. This is not a place for fly-by's.

Great work everyone. I tried the bypass on a friend's Z2...all is good. I currently have a Z1 and I'm anxiously waiting to see a solution for the Z1. It has been mentioned that have a Z2 image on the Z1 would allow the Z2 bypass to work. My question is, how hard is it to get a Z2 image on a Z1.

I tried logging on and no go. Is it still up?

Sorry for the late response Darth...are you same guy in the Passat World forum? (Beale AFB) The Z1 does not come with a sleeve that you can use on the Passat. I had to buy the Pioneer Double DIN kit and it worked like a charm. Hope this helps. BTW, this install was for a friend. From my last contact with her, the radio is doing well. Now, she worried about it getting stolen...she lives in the Bay Area.

Yes, I would stay away from the countershaft speed sensor. I used that on my Ridgeline and got way too many pulses (I was getting thousands going less than 5mph)...you will get errors from the Z1.