bego Posted April 29, 2009 Report Share Posted April 29, 2009 ok klanbo thanks for the reply, Boris, stephanie if you do read this..... Please please please please can you have a look Quote Link to post Share on other sites
BorisM Posted April 29, 2009 Report Share Posted April 29, 2009 ok klanbo thanks for the reply, Boris, stephanie if you do read this..... Please please please please can you have a look I'm pretty sure that there are quite a few people smarter than me looking into it right now (besides, I already have a US version so I have voice control), and no results yet... Quote Link to post Share on other sites
bego Posted April 30, 2009 Report Share Posted April 30, 2009 Ok thanks anyway Boris Quote Link to post Share on other sites
Guenni Posted August 20, 2009 Report Share Posted August 20, 2009 Hello everybody... I am using an F900BT in Europ for some months now and was always interested in having voice control. For that reason I was contacting the pioneer service. I always thought, that the Europe und US Version have the same hardware equipment. But i was told that the US Avic has an aditional board in it which is just for voice recognition. So it will not be possible to enable this feature on EU Models just by software!!! I hope this will help all EU AVic users who were still trying to enable this function on their units. Unfortunately we are not able to get this feature... Quote Link to post Share on other sites
Esilar Posted August 20, 2009 Report Share Posted August 20, 2009 Users in Europe who want to have Voice Control need to wait for the new AVIC-F10BT. Quote Link to post Share on other sites
MisterK Posted February 2, 2010 Report Share Posted February 2, 2010 Hello everyone ... As a newby it might seem bad practice to revive a thread as this one, but ... So far I notice everyone has been concentrating on getting the Pioneer Voice Command software working. Has anyone actually tried to get some other voice recognition software to run on the AVIC F series? Stuff like Microsoft MICROSOFT Voice Command 1.5 For Windows CE Devices or so? There have to be voice recognition solutions for Windows CE which don't require extra hardware ... Possibly those require training your specific voice, but I for one wouldn't mind that. I would expect that iGo supports keyboard input and that hence such a program would just translate the spoken commands into keystrokes inserted into the event-stream of Windows CE. As such, having the program always running (which typically is possible by editing the registry a bit on WinCE devices) and subscribing to a hardware button (assuming at least some of the keys of the AVIC F are implemented as WinCE hardware buttons), could trigger it to then recognize a command and based on that output keysequences to iGo. I know it's a longshot and probably requiring some custom code, but has anyone actually tried this road? On a related topic: I noticed somewhere in this thread that a DLL was mentioned in some iGo config. Does this mean iGo can load "extensions"? Does someone have info on the interface of such extensions? It could open a whole new world of possibilities ... Quote Link to post Share on other sites
SG-1 Charpy Posted February 13, 2010 Report Share Posted February 13, 2010 PS: sorry for my poor english !!! I'm just a frenchy !!! Hi all, it's my first post and i would like to give some info of the voice control of the F900BT. The software is Voicebox http://www.voicebox.com/, It's an embedded version for Pioneer. Before March 2008, only American English language was available, this is why the Europe version of F900BT was sold without voice recognotion. But since march 2008, 6 europeans language was available: Dutch, British English, French, Italian, German and Spanish. See the link: http://www.voicebox.com/pressroom/releases/release-17.php At this time the new AVIC-F10BT sold in europe has the voice recognition : http://www.pioneer.eu/eur/products/25/111/241/AVIC-F10BT/specs.html in english or http://www.pioneer.eu/fr/products/25/111/241/AVIC-F10BT/specs.html en français Click on "Voice Recognition (+)" ou "Reconnaissance Vocale (+)" for more details Maybe if someone have a backup of a european F10BT, we could compared the files and find an issue !!! Quote Link to post Share on other sites
tubbs99 Posted September 6, 2010 Report Share Posted September 6, 2010 Did anybody get the voice recognition feature working? The 920BT has the Parrot CK5050+ module which does provide voice recognition ability. This has been confirmed on the Parrot site. So it must be a software restriction which is stopping the VR feature being enabled in the europen models. Any developments guys? Quote Link to post Share on other sites
VBLUE42 Posted September 6, 2010 Report Share Posted September 6, 2010 That portion of the unit is not hackable. Only the navi portions of these units are able to be hacked. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.