ill.die.trying Posted June 25, 2009 Author Report Share Posted June 25, 2009 Any chance the sound files can be louder? In v4.2 I have the key volume and spoken volume all of the way up and i can just barely hear the camera alert voice when my music is at 50+ Thanks 50+? now i know that it's not the soundfile that has the problem, i'll send you a link later that has louder sounds/key beeps/camera alerts Quote Link to post Share on other sites
69sixpackbee Posted June 25, 2009 Report Share Posted June 25, 2009 Got this error: I'll try it again. Thanx, Bud Nope...still shows a larger font speed reading (MPH) above and a different displayed number which is smaller font below (also in MPH).. try this change this part txtSC_Speed.SHOW hscSC_Speed.VALUE nCameraSpeed hscSC_Speed.SHOW txtSC_SpeedValue.SHOW ;SETFORMATTED_UNIT_TEXT txtSC_SpeedUnit "km/h" runif nCamSpeedUnit 0 'txtSC_SpeedUnit.SET "mph"' else_run 'txtSC_SpeedUnit.SET "km/h"' txtSC_SpeedValueMI.SHOW txtSC_SpeedUnitMI.SHOW txtSC_SpeedUnit.SHOW run sc_hscSC_Speed_OnChange sprSC_Type.PHASE "vTmp" sprSC_Dir.PHASE "vDir" runif vTmp 1 'txtSC_SpeedValueMI.HIDE, txtSC_SpeedUnitMI.HIDE, txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' runif vTmp 4 'txtSC_SpeedValueMI.HIDE, txtSC_SpeedUnitMI.HIDE, txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' to this txtSC_Speed.SHOW hscSC_Speed.VALUE nCameraSpeed hscSC_Speed.SHOW txtSC_SpeedValue.SHOW SETFORMATTED_UNIT_TEXT txtSC_SpeedUnit "km/h" ;runif nCamSpeedUnit 0 'txtSC_SpeedUnit.SET "mph"' ;else_run 'txtSC_SpeedUnit.SET "km/h"' ;txtSC_SpeedValueMI.SHOW ;txtSC_SpeedUnitMI.SHOW txtSC_SpeedUnit.SHOW ;run sc_hscSC_Speed_OnChange sprSC_Type.PHASE "vTmp" sprSC_Dir.PHASE "vDir" runif vTmp 1 ' txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' runif vTmp 4 ' txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' and in your speedcam_800_480 change this code to this haven't tried it but it should work, let me know how it goes Quote Link to post Share on other sites
ill.die.trying Posted June 25, 2009 Author Report Share Posted June 25, 2009 Got this error:I'll try it again. Thanx, Bud Nope...still shows a larger font speed reading (MPH) above and a different displayed number which is smaller font below (also in MPH).. try this change this part txtSC_Speed.SHOW hscSC_Speed.VALUE nCameraSpeed hscSC_Speed.SHOW txtSC_SpeedValue.SHOW ;SETFORMATTED_UNIT_TEXT txtSC_SpeedUnit "km/h" runif nCamSpeedUnit 0 'txtSC_SpeedUnit.SET "mph"' else_run 'txtSC_SpeedUnit.SET "km/h"' txtSC_SpeedValueMI.SHOW txtSC_SpeedUnitMI.SHOW txtSC_SpeedUnit.SHOW run sc_hscSC_Speed_OnChange sprSC_Type.PHASE "vTmp" sprSC_Dir.PHASE "vDir" runif vTmp 1 'txtSC_SpeedValueMI.HIDE, txtSC_SpeedUnitMI.HIDE, txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' runif vTmp 4 'txtSC_SpeedValueMI.HIDE, txtSC_SpeedUnitMI.HIDE, txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' to this txtSC_Speed.SHOW hscSC_Speed.VALUE nCameraSpeed hscSC_Speed.SHOW txtSC_SpeedValue.SHOW SETFORMATTED_UNIT_TEXT txtSC_SpeedUnit "km/h" ;runif nCamSpeedUnit 0 'txtSC_SpeedUnit.SET "mph"' ;else_run 'txtSC_SpeedUnit.SET "km/h"' ;txtSC_SpeedValueMI.SHOW ;txtSC_SpeedUnitMI.SHOW txtSC_SpeedUnit.SHOW ;run sc_hscSC_Speed_OnChange sprSC_Type.PHASE "vTmp" sprSC_Dir.PHASE "vDir" runif vTmp 1 ' txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' runif vTmp 4 ' txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' and in your speedcam_800_480 change this code to this haven't tried it but it should work, let me know how it goes just search all your ui's for txtSC_SpeedValueMI and txtSC_SpeedUnitMI and comment it out, any other US users having this problem? Quote Link to post Share on other sites
ewickj Posted June 26, 2009 Report Share Posted June 26, 2009 just search all your ui's for txtSC_SpeedValueMI and txtSC_SpeedUnitMI and comment it out, any other US users having this problem? i noticed the same thing but i dont have version 4.2 i am still using 4.1 but i dont have enought speed cameras around me to worry about it so it doesnt bug me i was wondering thou is there a way to add the speed limit of the road so the unit knows what the speed limit is Quote Link to post Share on other sites
N-S-E-W Posted June 26, 2009 Report Share Posted June 26, 2009 i was wondering thou is there a way to add the speed limit of the road so the unit knows what the speed limit is That's determined by data on the map you're running. If Teleatlas didn't have it on the version on your unit, there's no hack to install it. Luckily we can update to newer map versions through testmode and an updated ezrider. After that it's really a crapshoot on there being newly added speed data and/or the accuracy of that data. Quote Link to post Share on other sites
ill.die.trying Posted June 26, 2009 Author Report Share Posted June 26, 2009 just search all your ui's for txtSC_SpeedValueMI and txtSC_SpeedUnitMI and comment it out, any other US users having this problem? i noticed the same thing but i dont have version 4.2 i am still using 4.1 but i dont have enought speed cameras around me to worry about it so it doesnt bug me i was wondering thou is there a way to add the speed limit of the road so the unit knows what the speed limit is so this is pretty much happening to all US users, i'l have a fix for it, Quote Link to post Share on other sites
ill.die.trying Posted June 26, 2009 Author Report Share Posted June 26, 2009 as i cannot recreate this issue regarding speedcams, can someone try this in speedcam.ui, search for this code runif nCamSpeedUnit 0 'txtSC_SpeedUnit.SET "mph"' else_run 'txtSC_SpeedUnit.SET "km/h"' and replace it with this code txtSC_SpeedUnit.SET "km/h" what it does is to permanently set txtSC_SpeedUnit to kmh let me know if it fixes it Quote Link to post Share on other sites
69sixpackbee Posted June 26, 2009 Report Share Posted June 26, 2009 I'll give it a try tomorrow. Hav'nt had time.. Thanx, IDT! Quote Link to post Share on other sites
HAAK31 Posted June 26, 2009 Report Share Posted June 26, 2009 As we are talking on speedlimits here: I really like to have eu speedlimit on my unit, how do i do that, I know the info is there, because i can select it in the infobox, but i like to have it like the us speedlimit is there now. I tried it with a script from cmh, deleting your us script, but now i get the message, that it cannot find something related to your us script ande the eu one still doesn't work... Quote Link to post Share on other sites
ill.die.trying Posted June 26, 2009 Author Report Share Posted June 26, 2009 As we are talking on speedlimits here: I really like to have eu speedlimit on my unit, how do i do that, I know the info is there, because i can select it in the infobox, but i like to have it like the us speedlimit is there now. I tried it with a script from cmh, deleting your us script, but now i get the message, that it cannot find something related to your us script ande the eu one still doesn't work... the option yourtalking about is just an on/off option, so what it does is it would display speed limit if your map has it available, even if you have it set to on and the map doesnt have the data for it nothing would show up Quote Link to post Share on other sites
69sixpackbee Posted June 26, 2009 Report Share Posted June 26, 2009 what it does is to permanently set txtSC_SpeedUnit to kmh Don't we want MPH displayed?? Thanx, Bud Quote Link to post Share on other sites
HAAK31 Posted June 26, 2009 Report Share Posted June 26, 2009 As we are talking on speedlimits here: I really like to have eu speedlimit on my unit, how do i do that, I know the info is there, because i can select it in the infobox, but i like to have it like the us speedlimit is there now. I tried it with a script from cmh, deleting your us script, but now i get the message, that it cannot find something related to your us script ande the eu one still doesn't work... the option yourtalking about is just an on/off option, so what it does is it would display speed limit if your map has it available, even if you have it set to on and the map doesnt have the data for it nothing would show up thats exactly what i'm looking for, maps here in the netherlands are very good, almost everywhere the speedlimit is in the mapdata.but how do i do that? Quote Link to post Share on other sites
ill.die.trying Posted June 26, 2009 Author Report Share Posted June 26, 2009 what it does is to permanently set txtSC_SpeedUnit to kmh Don't we want MPH displayed?? Thanx, Bud yes but it is already displayed in the bottom right? Quote Link to post Share on other sites
69sixpackbee Posted June 26, 2009 Report Share Posted June 26, 2009 I guess. They are both in MPH..the bottom of the two in smaller fonts. I'll change this and give it a go. Thanx Quote Link to post Share on other sites
ewickj Posted June 26, 2009 Report Share Posted June 26, 2009 as i cannot recreate this issue regarding speedcams, can someone try this in speedcam.ui, search for this code runif nCamSpeedUnit 0 'txtSC_SpeedUnit.SET "mph"' else_run 'txtSC_SpeedUnit.SET "km/h"' and replace it with this code txtSC_SpeedUnit.SET "km/h" what it does is to permanently set txtSC_SpeedUnit to kmh let me know if it fixes it i just tried this and yes it changes the top to kmh and the bottom stays mph Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.