lacehim Posted October 19, 2009 Report Share Posted October 19, 2009 I remember GTIMatt's data.zip had one. All this coding is marked in the data.zip. There might even be some code on that thread. Happy reading. Quote Link to post Share on other sites
34by151 Posted October 19, 2009 Author Report Share Posted October 19, 2009 My Last update had that and is based upon GTImat's mods. If you press the icon in the lower right it jumps you to the TMC screen. You might also try the poi's in that release as they have heaps of location updates over the pioneer ones including all the petrol stations and fast food outlets When I get a V3 testbed running I will check what's missing from the new files and update them. Cheers 34by151 Quote Link to post Share on other sites
rodman1919 Posted October 20, 2009 Report Share Posted October 20, 2009 Hey i downloaded most of the well known fast food chain POI's like McDonalds, KFC, Hungry Jacks, Subway, etc.... and i put them through AVIC Feeds and they converted fine, i exported them onto my SD card and my unit read them fine, but so how do i transfer them over to my unit so they stay there? Because basically they were there temporarily when i put the SD card in, and when i took them out, well they obviously weren't there. Thanks Quote Link to post Share on other sites
34by151 Posted October 21, 2009 Author Report Share Posted October 21, 2009 To the members who sent me stuff after my last request, Thank you very much I hope to have my V3 test bed up and running before the weekend. I can also confirm SUNA activation can generated and no you cant use the codes from another unit as they are tied to your serial and model number. I am going to release this in way that does not expose how it is done for the simple reason that I don't want this shut-down. Hard lessons learned with other popular things using smartcards How this will work is you will go into the TMC settings screen. If TMC is detected but no key is present you can click on the TMC status and you will get a new screen for TMC activation. I will make a V3 and V2 update for this. V2 will be an updated data.zip only. V3 will be an update for those (like me) awaiting the official update. To that end I need some help from a members with a few things 1. Some more V3 Licence files (\My Flash Disk\APL2\iGo\LICENSE\Pioneer_PNA_AUS@R15.1B_(SE,_TMC)_2009-03-11_NN747.lic) Please don't attach these PM me a location 2. A member that has has not updated the V2 maps from the OEM ones to confirm something for me. Can you download the files below from http://www.4shared.com/dir/14084405/70e ... pdate.html V20a_Update.part1.rar V20a_Update.part2.rar V20a_Update.part3.rar V20a_Update1.rar Extract the V20a_Update files to your SD card Extract the V20a_Update1 files to your SD card overwriting any of the first ones Delete the directories \Update\APL2\Igo\CONTENT \Update\APL2\Igo\LICENSE \Update\APL2\Igo\EZRIDER.EXE \Update\APL2\Igo\SYS.TXT Follow the instructions posted at the beginning of this thread to install but, This will apply the Igo mods but not update the maps. Once you are in go into the TMC settings screen, Wait for the tuner to lock on to a TMC source PM me what it says in the brackets, it will be CA-TMC (?????) Thanks 34by151 Quote Link to post Share on other sites
ghostdunks Posted October 21, 2009 Report Share Posted October 21, 2009 Tried downloading the files for: AVIC-FT900BT-R151 files have Sensis R15.1 maps + lic Think its missing part2 of the rar set? Or am I missing something? Quote Link to post Share on other sites
34by151 Posted October 21, 2009 Author Report Share Posted October 21, 2009 Your Right part2 is missing for some reason, Uploading now Cheers 34by151 Quote Link to post Share on other sites
34by151 Posted October 21, 2009 Author Report Share Posted October 21, 2009 Upload Complete Cheers 34by151 Quote Link to post Share on other sites
ghostdunks Posted October 22, 2009 Report Share Posted October 22, 2009 Thanks mate, I'll grab it down tonight and give it a play over the weekend. Quote Link to post Share on other sites
makcay Posted October 29, 2009 Report Share Posted October 29, 2009 ive got us version f900bt with aussie firmware and maps as per your guide but i cant get bluetooth to work now. ive seen replies about turning TMC off as this is causing the bluetooth to crash and was just wondering how i turn it off. Sorry if this question seems a bit silly but i need some help. thanks in advance Quote Link to post Share on other sites
34by151 Posted October 29, 2009 Author Report Share Posted October 29, 2009 Bluetooth Fix: Boot into testmode and delete the file "My Flash Disk\USER\UserData\iGo\save\msnd" If present it kills the bluetooth. It's a good idea to add the bluetooth patch as well after that Cheers 34by151 Quote Link to post Share on other sites
makcay Posted October 29, 2009 Report Share Posted October 29, 2009 Hey thanks for the reply. I have deleted the msnd file as instructed with no success. Where can i find the bluetooth patch so i can try that? thanks, Quote Link to post Share on other sites
34by151 Posted October 30, 2009 Author Report Share Posted October 30, 2009 It was on the pioneer eu site if you search on the board will probably find it as well. If you are really stuck I can get it from a backup 34by151 Quote Link to post Share on other sites
34by151 Posted November 1, 2009 Author Report Share Posted November 1, 2009 I have uploaded the Bluetooth updates to 4shared, download the files from http://www.4shared.com/dir/14084405/70e ... pdate.html Cheers 34by151 Quote Link to post Share on other sites
34by151 Posted November 1, 2009 Author Report Share Posted November 1, 2009 I have uploaded a VMware image of the AVIC emulator to 4shared, dowload the files from http://www.4shared.com/dir/14084405/70e ... pdate.html The image runs microXP and has installed AVIC emulator for V2 Firmware AVIC emulator for V3 Firmware Winrar ExamDif VNC VMtools The Nic is set to DHCP so if you need a static IP just set that in microXP It has VNC server installed if you want to use remote access You will need VMplayer or VMworkstation to use the image, download this from VMware website VMtools allows you to access loacl drives on your pc (use the shaed folders feature) For V2 Firmware 1. Make a backup Copy of your AVIC 2. Copy all the files below "My Flash Disk" to c:\AVIC\My Flash Disk.2 3. Run "EmulatorV2.bat" on the desktop For V3 Firmware 1. Make a backup Copy of your AVIC 2. Copy all the files below "My Flash Disk" to c:\AVIC\My Flash Disk.3 3. Run "EmulatorV3.bat" on the desktop Both will correct the backups each time you load the emulator. This will 1. Install the correct EZrider and License file 2. Remove the basemap.fbl from \apl2\igo\content\maps Cheers 34by151 Quote Link to post Share on other sites
makcay Posted November 4, 2009 Report Share Posted November 4, 2009 34by151...still no luck with the bluetooth update. when i go to bluetooth settings it says version not found and then when i go to upload either 2.9 or 3.3 it tells me an error occured. i dont know what to do i just want bluetooth to work with maps i dont care about tmc/msndirect...grrrrr any more hints/tips? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.