diaftia Posted August 6, 2009 Report Share Posted August 6, 2009 Just so you know that I am on 3.01 and it looks like some things are a little different. Now all I did was plop all the files onto an SD card, copied them over, booted it up and started a route home. I did not actually drive anyplace. The only thing I noticed was there are some things missing based on your screen shots while on a route. The two individual boxes showing what I think is distance and time to destination are not there. The box to the right of where those are supposed to be showing current street was off to the right by itself with the larger box showing next street below it. Everything else at a cursory glance looked good. Hope this helps! could you check if full screen map option is on? if it is turn it off then let me know if problem still persist Hey IDT- I figured it out. It's actually because of the units of measure. I remembered in your screen shots that you used KM. When I switch from miles to kilometers they come up on te screen correctly. Quote Link to post Share on other sites
hanibal Posted August 6, 2009 Report Share Posted August 6, 2009 what about the tilt feature, i had another sky mod on and if i tilteled my screen down once, the arrow would go off screen? Quote Link to post Share on other sites
ill.die.trying Posted August 6, 2009 Author Report Share Posted August 6, 2009 what about the tilt feature, i had another sky mod on and if i tilteled my screen down once, the arrow would go off screen? i will look into that Quote Link to post Share on other sites
69sixpackbee Posted August 6, 2009 Report Share Posted August 6, 2009 Hey, IDT, I thought I'd share some glitches with mine: I set up all of the warnings for the speedcams before going down the road to check this out. I set the audible alerts, visual and voice. When it approached a known speedcam location as was downloaded by the speedcam.txt and .spud files, as soon as it got within range the unit would immediately start to reboot BUT if I put in my own cam it would read it and do all of the **normal** alerts just fine so it seems to have something to do with the original, unedited speedcams. Also, even if I shut it off and restart the speedcam sound defaults to "disabled" every time but everything else stays to the settings I choose. The speed limit that I chose by the slider bar (example 50KPH/31MPH) for a particular camera it will read that number in "Miles Per Hour" and not KPH..I am here in the states It would be nice if I saw just one speed selection --in US units--. I also had to add my clip_planes.ini file because I am running all of the previous schemes. I also had to add nightguidanance_arrow(bmp & spr) so that these would work. Getting close! Thanx, Bud Quote Link to post Share on other sites
ill.die.trying Posted August 6, 2009 Author Report Share Posted August 6, 2009 Hey, IDT, I thought I'd share some glitches with mine: I set up all of the warnings for the speedcams before going down the road to check this out. I set the audible alerts, visual and voice. When it approached a known speedcam location as was downloaded by the speedcam.txt and .spud files, as soon as it got within range the unit would immediately start to reboot BUT if I put in my own cam it would read it and do all of the **normal** alerts just fine so it seems to have something to do with the original, unedited speedcams. Also, even if I shut it off and restart the speedcam sound defaults to "disabled" every time but everything else stays to the settings I choose. i'll look into it The speed limit that I chose by the slider bar (example 50KPH/31MPH) for a particular camera it will read that number in "Miles Per Hour" and not KPH..I am here in the states It would be nice if I saw just one speed selection --in US units--. I also had to add my clip_planes.ini file because I am running all of the previous schemes. I also had to add nightguidanance_arrow(bmp & spr) so that these would work. the reason for having two values is because with the original set up, even if you have it set at 50mph the voice alert would still read it at 30mph, the warning voice is dependent on your unit settings, so for the example you have 50KPH/31MPH will say 50KPH if your units is set to km and will say 30MPH if your unit is set to MPH, i don't know if my explanation is clear but all it is is your speedcam is dependent on your unit setting Quote Link to post Share on other sites
rosendo192000 Posted August 6, 2009 Report Share Posted August 6, 2009 Thanks "ill.die.trying" , i just recently added the 3.0 FW and now this .... Really thanks for all the hard work you guys have put in to making our systems work the way the should of been since the first day i purchased the deck. i had Modded my DATA before but just screwed everything up , i don't have an complains and its the best look so far not to say the easier it is to navigate with it . THANKS AGAIN Quote Link to post Share on other sites
ill.die.trying Posted August 6, 2009 Author Report Share Posted August 6, 2009 Thanks "ill.die.trying" , i just recently added the 3.0 FW and now this .... Really thanks for all the hard work you guys have put in to making our systems work the way the should of been since the first day i purchased the deck. i had Modded my DATA before but just screwed everything up , i don't have an complains and its the best look so far not to say the easier it is to navigate with it . THANKS AGAIN no prob Quote Link to post Share on other sites
ccsizzlin Posted August 6, 2009 Report Share Posted August 6, 2009 Hey IDT, I want the defaul tilt to show a little less sky, which one of the variables do I adjust? 3d_max_tiltlevel=10000 3d_max_zoomlevel=1500 I'd like to zoom in a bit more and adjust so I see about half as much sky, then make the arrow larger. To do this, should I adjust the zoom level to 1200, then the tilt level to about 8000? Then I'll make the 3dcarsizemin=3500 to increase the size of the arrow? Thanks in advance! Quote Link to post Share on other sites
hanibal Posted August 7, 2009 Report Share Posted August 7, 2009 i get no blue arrow? tried other schemes but i get errors? Quote Link to post Share on other sites
tattooedfilmfreak Posted August 7, 2009 Report Share Posted August 7, 2009 Keep getting prompted to input a password on the FTP link, any suggestions? Quote Link to post Share on other sites
touche6784 Posted August 7, 2009 Report Share Posted August 7, 2009 was the software bypass implemented on the data.zip file? It does not seem so as I get the error message telling me to check my wiring. Other than that it all seems to work well. Quote Link to post Share on other sites
ill.die.trying Posted August 7, 2009 Author Report Share Posted August 7, 2009 was the software bypass implemented on the data.zip file? It does not seem so as I get the error message telling me to check my wiring. Other than that it all seems to work well. sorry i forgot to add that part, v2 will be up soon, if you're comfortable with changing it please do so Quote Link to post Share on other sites
hanibal Posted August 7, 2009 Report Share Posted August 7, 2009 wht do the screnn shots show blue arrow but still get red after install? Quote Link to post Share on other sites
ill.die.trying Posted August 7, 2009 Author Report Share Posted August 7, 2009 wht do the screnn shots show blue arrow but still get red after install? it's because of the scheme i'm using, go to the ftp site and on the main level you'll find schemes that you can download Quote Link to post Share on other sites
eppler Posted August 7, 2009 Report Share Posted August 7, 2009 Hey IDT do you know if it is possible to put a shortcut for contacts on the nav screen? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.