tetex79 Posted June 1, 2010 Report Share Posted June 1, 2010 I have a problem, I was doing the update in my avic700bt and i think i did everything like i was supost to do it but after i hit the reset buttom for 5's my unis goes to the pioneer scremm for about 20's and then every thing goes black..... I dont know what to do next. I have read and done some of the sugestion on the forum but nothing seam to be working.... Pleace help Many people have encountered this problem ... Make sure to copy all the files and folders inside the "My Flash Disk" of your SD drive to the inside of the "My Flash Disk" of your AVIC, in TestMode. Good lucks. is there a way to go back to the other files. I will check any way. Quote Link to post Share on other sites
CLIN0910 Posted June 1, 2010 Report Share Posted June 1, 2010 I was wondering if someone could help me with something. I'm encountering a problem with this update.I have performed all steps, I copied all the files from the SD card to the "My flash disk" on the F90BT. I did all this, after it all transfered, I then held the reset button for 5 seconds and then released. The radio would reboot, the pioneer logo shows up, and then it would bring me back to WINCE menu with the SD card in. Without the SD card in the machine, after the pioneer logo during bootup it goes black. Does anyone know where I'm going wrong? Right now my radio is just hunk of junk taking up space in my dash. Thanks in advance. Ok i had the same problem your having but i just got mine working.. So in the instructions it says copy contents of the "My Flash Drive" folder from SD card to the "My Flash Drive" So what i was doing and it did not work, it was doing the same thing that is happing to you. I was copying the whole SD card into the My flash Drive. What you goto do is there should be another folder inside your SD card that says My Flash or something like that. Open that up copy all that to the Head units My Flash Drive. Let me know if it works for you.. Thanks for that, it immediately fixed the problem, everything works much better, except the voice recognition is still crap. I would say call so and so, it would always default to calling AAA. Can't have it all. Quote Link to post Share on other sites
Cwolfey Posted June 1, 2010 Report Share Posted June 1, 2010 OK got a question: Trying to fix a F900BT for a friend I searched and didnt find this problem This was a brand new unit, then it got really slow and the touch screen stopped working, we would get sound and hard buttons would work. Then Even booting using testmode was really slow and un usable I was able to after many tries delete eveything install an old update to get the unit to function and then after many hours successfully install the 3.1 image following the instructions, All was good! works great, fast, new maps, etc NOW oddly enough in the same time frame it originally started acting up , again it is totally locked up very slow, and even testmode with in windows CE is very slow again and doesnt respond We unplugged everything from the unit except the power harness, now we are trying to get the unit to start responding again by formatting CE and installing various updates to just get into CE and be able to format and copy a new Flash Drive folder What could be causing this issue though? Quote Link to post Share on other sites
wavag Posted June 1, 2010 Report Share Posted June 1, 2010 I am going to try this mod on a F90. I have one question sorry if this was asked before. Can I go back to v2 if I need to since this is an update also? Thanks for any info yes I did make a back up of my flash disk. Quote Link to post Share on other sites
tetex79 Posted June 2, 2010 Report Share Posted June 2, 2010 I was able to fix my problem with the black scream after the 5's reset. I don't know if this is going to work for someone ealse but this is what i have done. whe i did the update for the fierst time i was using winzip for some reson that i do not understand the file side was coming up to be 1.83GB , wish me not knowing I when to my avic f700BT and started to do my update everthing was going to plan but when i did the 5's reset everything when wrong. so i gat Winrar application and unzip my file and the 1.82GB wish it seems that the ror was smaller but i disated to give it a go. and for some reson that i cant explane my 700bt started working with the new file. I don't know wath can be wrong with winzip but i think that for some reson is corroptin some files and it making the rar not to work. I hope that this helps someone. if any one have a question fell free to ask.. AVIC F 700BT Quote Link to post Share on other sites
packet69 Posted June 3, 2010 Report Share Posted June 3, 2010 I just put this on my x910bt So far so good.. I'll have to play with it more when I get a chance... Does anyone have a problem with x710bt? My units had the latest SW and MAP, but had a rebooting problem lately. Hence, I tried update WINCE as well as other mods, but not able to bring the unit up after complete the update procedure here. I followed all the instruction, format, and copied all contents to "My Flash Disk" wihtout an issue, but my unit shows an error message as below after reset; "Fatal Application Error" Application AV has performed an illegal operation and will be shut down. If the problem persists, contact the program vendor. Program: AV Exception: 0xC0000005 Address: 02BD56F4 Can someone help me what to do? Quote Link to post Share on other sites
Red One Posted June 3, 2010 Report Share Posted June 3, 2010 Just to let you know (and I don't condone this, but I was in a hurry), the tutorial was so easy I did it while I was driving. I had to stop because I jacked something up on my dash on my way to work. So I had my SD card with me and the instructions because I figured I would do it at lunch. I literally stopped, fixed what I needed to fix, and popped the sd card in before starting the car. The rest was done while on the road. I've added the mute button and the cancel route buttons from the other mods I have been reading about. The ONLY mod I have not been able to add or find for that matter, is the WilliamG shortcut mod. I like his shortcuts above everyone elses (no offense). I'm trying to track it down, but if anyone could post the code, and or instructions on how to add it, I would greatly appreciate it. Seriously Retell, good job. Keep up the good work! I see that over in the Complete 3.0 install guide you said you were also adding the Trip computer, but I guess it didn't come through? Quote Link to post Share on other sites
jnazarof Posted June 4, 2010 Report Share Posted June 4, 2010 I get an update failed message immediately when attempting the WinCE update. Anyone else have this problem? Quote Link to post Share on other sites
dvine1 Posted June 4, 2010 Report Share Posted June 4, 2010 I followed the instructions that you have for this install, but when I get to step 5 and reset, nothing happens. My unit just comes back up with the splash screen; I can get to the "top menu" but then nothing responds. I hit "settings" and go to system info and it shows version 2.06 and for map version, it says "no maps loaded" When I try to get into testmode (with another sd card that has the testmode files), it gives me a 'windows-like' screen that looks like it's copying something then the system goes blank. I don't have a clue what to do next. Any help would be greatly appreciated. Quote Link to post Share on other sites
jnazarof Posted June 4, 2010 Report Share Posted June 4, 2010 I get an update failed message immediately when attempting the WinCE update. Anyone else have this problem? Problem solved. Used a different SD card and all went well. Thanks Retell!! Quote Link to post Share on other sites
MJFinelli Posted June 5, 2010 Report Share Posted June 5, 2010 ok after doing this update to my 700bt how can i get the buildings to show up? Also how can i change the red gps arrow ? maybe my car or something Quote Link to post Share on other sites
robotprom Posted June 5, 2010 Report Share Posted June 5, 2010 worked perfectly with my 700. seems snappier now too. thanks! Quote Link to post Share on other sites
pioneercrazed Posted June 6, 2010 Report Share Posted June 6, 2010 Thanks for this, just updated my F90BT and seems to be quite a bit better. Thanks to you for making it so easy for all of us too scared to screw something up. Kudos! I'll be seeding for probably months... Quote Link to post Share on other sites
packet69 Posted June 6, 2010 Report Share Posted June 6, 2010 I just put this on my x910bt So far so good.. I'll have to play with it more when I get a chance... Does anyone have a problem with x710bt? My units had the latest SW and MAP, but had a rebooting problem lately. Hence, I tried update WINCE as well as other mods, but not able to bring the unit up after complete the update procedure here. I followed all the instruction, format, and copied all contents to "My Flash Disk" wihtout an issue, but my unit shows an error message as below after reset; "Fatal Application Error" Application AV has performed an illegal operation and will be shut down. If the problem persists, contact the program vendor. Program: AV Exception: 0xC0000005 Address: 02BD56F4 Can someone help me what to do? This problem fixed after copy over the entire content to the "My Flash Disk". Quote Link to post Share on other sites
narcolept Posted June 8, 2010 Report Share Posted June 8, 2010 Installed without issue. Thanks for the image.. Gotta say though, it's too bad you can't build the .RAR to make everyone pass a basic cognition test to extract it though.. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.