anothercollector Posted June 30, 2017 Report Share Posted June 30, 2017 https://drive.google.com/folderview?id=0Bw8eR8qma3h4UzVQRU5WT0p6ajQ&usp=sharing There's a download of all the files guys Hi guys and thanks! I just wanted to confirm that the google drive files worked and saved my Avic-F700BT. One important step that can not be stressed enough, this NEEDS to be done on a Windows PC. I tried unzipping and loading the SD card on my Macbook and got a fatal error. Redownloaded the files on a PC and unzipped them there, problems solved. For those of you requesting people to reseed the torrent, all you need to do is download the files shared on this google drive. (it's also much faster). Quote Link to post Share on other sites
avic105 Posted September 13, 2017 Report Share Posted September 13, 2017 How do I download FX3.1? There is no download. Quote Link to post Share on other sites
thenmens Posted October 19, 2017 Report Share Posted October 19, 2017 Thank you alexshay32393 Quote Link to post Share on other sites
thenmens Posted October 20, 2017 Report Share Posted October 20, 2017 First let me say thanks for all the hard work and you guys are amazing.I downloaded the 3.1FX torrent and extracted it to ta 16GB SD Card that I formatted Fat32 (using diskpart). I am running Map Version: 01.000600 and Version: 2.009000. The File structure is as follows: SD Card\My Flash Disk (Folder)SD Card\Testmode (Folder)SD Card\Device.nng (File)SD Card\ Winceimg.bin (File)SD Card\Winceimg.cks (File) I downloaded the files from a shared torrent and then fromhttps://drive.google.com/folderview?id=0Bw8eR8qma3h4UzVQRU5WT0p6ajQ&usp=sharingI follow the instructions below but after step 4 it displays 100% immediately (no count up to the 100%) and progress does not continue. Am I doing something wrong? Is the SD card to large for the Wince upgrade? I’ve tried both the torrent and the shared google drive files but both halt after step 4. Thank you! 1. Insert SD card into AVIC and turn it on.2. When the pioneer logo comes up, press and hold the menu, map, eject and the reset buttons at the same time. When your screen goes completely blank, let go of the reset button but continue to hold menu, map, and eject buttons. This will bring you to a blue screen, telling you to reset the unit (ignore this), you will have to enter the service combination. Press the volume knob in this sequence and you will see * signs for each push: Up, Up, Down, Menu, Left, Right.3. Select Wince Upgrade4. Select Update SD Format5. Wait until it says restart in the bottom center. Reset the unit and leave the SD card in.6. You should be greeted with testmode (It will look very similar to normal windows). Open Explorer and copy the contents of the "My Flash Drive" Folder from the SD card to the "My Flash Drive" that is located on the unit. Overwrite everything. (It will the copying will take 140min but will only take about 20)7. Press and hold reset for 5 seconds.8. Select your language and voice options.9. Enjoy FX3.1 Quote Link to post Share on other sites
GibsonTech Posted December 4, 2017 Report Share Posted December 4, 2017 Bringing up old news but.......... I installed this update a couple of days ago. Now I can't play music through my SD Card or USB. It recognizes when I plug them in but nothing happens. They both sit in "Loading" and do nothing else. Suggestions? Quote Link to post Share on other sites
jvandelinde Posted December 7, 2017 Report Share Posted December 7, 2017 i get an error code saying my flash disk apl 7z dll is lost ??? Quote Link to post Share on other sites
stevens Posted December 22, 2017 Report Share Posted December 22, 2017 bonjour a tous j ai besoin d'aide je vient d'achete un autoradio pionner avic f900bt met impossible de le metre a jour j ai suivis les detail sur le site pionner les manipulation a faire me aucun resultat meme en fesant reset comment je pourrait faire svp merci a tous Quote Link to post Share on other sites
multiomer1997 Posted February 7, 2018 Report Share Posted February 7, 2018 STUCK ON 100% Quote Link to post Share on other sites
McMm Posted June 30, 2018 Report Share Posted June 30, 2018 Hi, I have an other question. I have successfully installed this image to my avic f700, but I would like to add an other applications to the system. When I'm booting up in windows, I'm able to run another navigation system which I have installed on my SD card. But I would like to launch this navigation system from the main user interface. I know that the MainMenu application launches the main user interface, but does someone knows how I can add another application to this user interface. Or is the main user interface hard coded and should I compile it from scratch (where can I get the code)?? The second navigation system should be launched from the SD card, because I don't have any space left on the flash disk. Any help would be welcome. Quote Link to post Share on other sites
atomkahu Posted July 19, 2018 Report Share Posted July 19, 2018 Hello Friends! My old Avic F700 stopped Wince update progress. Idea?? Thanks Quote Link to post Share on other sites
basakel Posted August 24, 2019 Report Share Posted August 24, 2019 I bricked my f700bt than i did this procedure however how long is the pioneer logo supposed to show? Its not getting past the pioneer logo for 30 minutes now. I setup the language and then it rebooted and now i am at the pioneer logo screen. Quote Link to post Share on other sites
Gu42 Posted September 13, 2019 Report Share Posted September 13, 2019 Will this work on avh-3600dab? Quote Link to post Share on other sites
billmartin_us Posted October 13, 2020 Report Share Posted October 13, 2020 On 8/24/2019 at 5:06 AM, basakel said: I bricked my f700bt than i did this procedure however how long is the pioneer logo supposed to show? Its not getting past the pioneer logo for 30 minutes now. I setup the language and then it rebooted and now i am at the pioneer logo screen. Have the same thing on a 90bt. Ever get this resolved? Quote Link to post Share on other sites
brunowillis Posted August 9, 2021 Report Share Posted August 9, 2021 Is this one better or worse on the F700BT than ryar's hack with AvicNet and Igo Primo? Does it include igo Primo? Quote Link to post Share on other sites
jaza69 Posted September 2, 2021 Report Share Posted September 2, 2021 Thank you! Downloading the torrent rn! Not sure but I think this firmware (FX3.1) is only for North American Pioneer units. It may not work for European units as they are different (hardware or software, not sure) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.