poligraf Posted December 4, 2017 Report Share Posted December 4, 2017 ЗдравÑтвуйте. Пока не могу наÑтроить com port gps приемника. ПыталÑÑ Ð¿Ð¾Ð´Ñунуть вмеÑто файлы navi.exe- porttool.exe переименовав, запуÑкаетÑÑ Ð¼Ð°Ð³Ð½Ð¸Ñ‚Ð¾Ð»Ð° и виÑит заÑтавка "руку нави" и ничего не проиÑходит. Ð’ ручную. геморно перебирать порты и ÑкороÑÑ‚ÑŒ, надо Ñтавить porttool/ Похоже придетÑÑ Ñтавить тотал коммандер, да вот не могу найти проинÑталлированный, только иÑходники. Может еÑÑ‚ÑŒ у кого, а то придетÑÑ ÐµÑ‰Ðµ wmware ce Ñтавить и в нем уÑтанавливать. П.С. ЕÑÑ‚ÑŒ мыÑль, заменить Ñофтину av.exe ÐºÐ¾Ñ‚Ð¾Ñ€Ð°Ñ Ð¿Ñ€Ð¸Ð²Ñзана к кнопке av, дабы Ñменить Ð¸Ð½Ñ‚ÐµÑ€Ñ„ÐµÐ¹Ñ Ð¼Ð°Ð³Ð½Ð¸Ñ‚Ð¾Ð»Ñ‹, еÑÑ‚ÑŒ мыÑли подпихнуть avicnet... Quote Link to post Share on other sites
Rick Keisi Posted December 6, 2017 Report Share Posted December 6, 2017 ЗдравÑтвуйте. Ñпешу поделитÑÑ Ñ€ÐµÐ·ÑƒÐ»ÑŒÑ‚Ð°Ñ‚Ð¾Ð¼ ÑкÑпериментов. ÐаÑчет Ñмены Ñзыка, вÑе получилоÑÑŒ заменой файла как опиÑывали Ñ Ñамом начале темы. Язык ÑменилÑÑ, меÑтами кривовато, но терпимо. Далее. Решил попробовать Ñменить оболочку навигашки, в папке prg1/apl удалил файл navi.exe и вмеÑто него Ñкопировал вÑе файлы от навитела, переименовав navitel.exe в navi.exe. Однако, еÑÑ‚ÑŒ проблемка, не могу наÑтроить com порт gps приемника. Ð’ данный момент уÑтановил навител 9.6, буду пробовать другие Ñборки. Привет. Ð”Ð»Ñ ÐºÐ°ÐºÐ¾Ð³Ð¾ Ð²Ð¸Ð½Ð´Ð¾Ð²Ñ Ð±Ñ‹Ð» навител? СЕ 5? У Ð¼ÐµÐ½Ñ ÐµÑÑ‚ÑŒ навител 5 и Ñити гид Ð´Ð»Ñ Ð²Ð¸Ð½Ð´Ð¾Ð²Ñ Ð¡Ð•5. Quote Link to post Share on other sites
poligraf Posted December 7, 2017 Report Share Posted December 7, 2017 Привет. Ð”Ð»Ñ ÐºÐ°ÐºÐ¾Ð³Ð¾ Ð²Ð¸Ð½Ð´Ð¾Ð²Ñ Ð±Ñ‹Ð» навител? СЕ 5? У Ð¼ÐµÐ½Ñ ÐµÑÑ‚ÑŒ навител 5 и Ñити гид Ð´Ð»Ñ Ð²Ð¸Ð½Ð´Ð¾Ð²Ñ Ð¡Ð•5. Windows ce 5/6 Quote Link to post Share on other sites
Ilnur Posted December 7, 2017 Report Share Posted December 7, 2017 Привет. Ð”Ð»Ñ ÐºÐ°ÐºÐ¾Ð³Ð¾ Ð²Ð¸Ð½Ð´Ð¾Ð²Ñ Ð±Ñ‹Ð» навител? СЕ 5? У Ð¼ÐµÐ½Ñ ÐµÑÑ‚ÑŒ навител 5 и Ñити гид Ð´Ð»Ñ Ð²Ð¸Ð½Ð´Ð¾Ð²Ñ Ð¡Ð•5. дело не в СЕ5 или СЕ6, проблема в том что Ñпутников не видит, точнее навител не может определить к какому порту привÑзан gps у магнитоллы. Quote Link to post Share on other sites
manio112 Posted December 7, 2017 Report Share Posted December 7, 2017 when i run the igo on my mrz he cant find the gps but its getting my local time set. i thing navigation get to the right port but its lock by pioneer. wonder if we can get a developer test mode key then will be acces to more options Quote Link to post Share on other sites
Bonanza Posted December 8, 2017 Report Share Posted December 8, 2017 Thank You DZO for your Help , i used the Zip file with key and replaced the scripts USB to SD and it works like charm on my MRZ99 now to another point, i read a lot of threads and tried many times playing any video on my MRZ99 using SD card but all failed. does anyone know what video formats and audio settings should be done and what is the conversion software you are using , any help please. Quote Link to post Share on other sites
adzaM Posted December 9, 2017 Report Share Posted December 9, 2017 when i run the igo on my mrz he cant find the gps but its getting my local time set. i thing navigation get to the right port but its lock by pioneer. wonder if we can get a developer test mode key then will be acces to more options Hi manio112, I copied all files and directories of 'MapFactor NavigatorFree' Windows CE version to my MRZ02's USER\PRG1\APL (My Unit uses PRG1) folder, also changed the executable name 'Navigator.exe' to 'Navi.exe' but no way, it's not working. I've found a Windows CE version of IGo, I copied all files and rename main executable as 'Navi.exe'. It's working but I have the same problem that device cannot locate GPS (meanwhile time is correct). Questions are, 1. If it cannot locate GPS, where this correct time data comes? 2. If it is possible to run IGo, why MapFactor cannot be executed (both are Win CE version)? Quote Link to post Share on other sites
javed akhtar Posted December 15, 2017 Report Share Posted December 15, 2017 Hi manio112, I copied all files and directories of 'MapFactor NavigatorFree' Windows CE version to my MRZ02's USER\PRG1\APL (My Unit uses PRG1) folder, also changed the executable name 'Navigator.exe' to 'Navi.exe' but no way, it's not working. I've found a Windows CE version of IGo, I copied all files and rename main executable as 'Navi.exe'. It's working but I have the same problem that device cannot locate GPS (meanwhile time is correct). Questions are, 1. If it cannot locate GPS, where this correct time data comes? 2. If it is possible to run IGo, why MapFactor cannot be executed (both are Win CE version)? Dear AdzaM, I have also tried Maplorer on my MRZ05 but it does not run at all. I do not have IGO, if you give me the link, I will download and try to get it to work. Thanks and regards Quote Link to post Share on other sites
inderpal Posted December 17, 2017 Report Share Posted December 17, 2017 I've translated the Japanese language strings for the MRZ99 to English. I figured out the format of the LNG file, dumped the Japanese, translated all the strings using google translate, then rebuilt the file. Some of the English is not perfect but it makes the system much more usable. I've tested it with APP firmware version 3.070200 (installed with platform version 3.000600), other versions may not work. If the old language file is 93627 bytes long then this will almost certainly work. To install this, unzip the attachment mrz99english.zip and put the PF090JPJPN.LNG file on an sd card. (130905 bytes, md5sum is cb3f9cb76330704cc171e2b0acb9f6ad) Get into testmode by holding the NAVI button (left button with Japanese writing on it) and pressing right..left..right..left..right..left and then release NAVI. Go to the last entry on the first page (File Maintenance in Japanese) and press MENU (right button with Japanese writing on it) This opens the file manager which is in English and fairly obvious. Make a backup of /USER as described elsewhere on avic411.com Look in /USER to see if there is a file named PRG.FLG if there is, then the system uses /USER/PRG1, otherwise it uses /USER/PRG0 You can check the file versions by looking at /USER/PRGx/PF090APL.HTM (where x is 0 or 1 depending on PRG.FLG) go to /USER/PRGx/APL/LANGDATA/ delete PF090JPJPN.LNG go to /SD, copy the new PF090JPJPN.LNG and paste it into LANGDATA where the old one was. Switch off the power and when it restarts, it should be in English.... This worked for me but obviously is not 100% safe, be very careful in the file manager. Update: There's now an installer that also changes the background and most of the important images with japanese text. Find it here: https://github.com/dzo/mrz99/releases Hi DJO, This was awesome now ive got an english stereo. I have got one more problem the bluetooth is not working it use to work but now theres an error message saying change the passkey of the machine any chance you can help me out. Quote Link to post Share on other sites
TimTaler Posted December 19, 2017 Report Share Posted December 19, 2017 ЗдравÑтвуйте. Ñпешу поделитÑÑ Ñ€ÐµÐ·ÑƒÐ»ÑŒÑ‚Ð°Ñ‚Ð¾Ð¼ ÑкÑпериментов. ÐаÑчет Ñмены Ñзыка, вÑе получилоÑÑŒ заменой файла как опиÑывали Ñ Ñамом начале темы. Язык ÑменилÑÑ, меÑтами кривовато, но терпимо. Далее. Решил попробовать Ñменить оболочку навигашки, в папке prg1/apl удалил файл navi.exe и вмеÑто него Ñкопировал вÑе файлы от навитела, переименовав navitel.exe в navi.exe. Однако, еÑÑ‚ÑŒ проблемка, не могу наÑтроить com порт gps приемника. Ð’ данный момент уÑтановил навител 9.6, буду пробовать другие Ñборки. ПоздравлÑÑŽ Ñ ÑƒÐ´Ð°Ñ‡Ð½Ñ‹Ð¼ ÑкÑпериментом! У Ð¼ÐµÐ½Ñ Ñ‚Ð¾Ð¶Ðµ MRZ-90. То еÑÑ‚ÑŒ доÑтаточно поменÑÑ‚ÑŒ файл PF090JPJPN.LNG. ? И перезапуÑтить ÑиÑтему. Или нужно отÑоединить клейму аккумулÑтора? Quote Link to post Share on other sites
TimTaler Posted December 19, 2017 Report Share Posted December 19, 2017 ЗдравÑтвуйте. Ñпешу поделитÑÑ Ñ€ÐµÐ·ÑƒÐ»ÑŒÑ‚Ð°Ñ‚Ð¾Ð¼ ÑкÑпериментов. ÐаÑчет Ñмены Ñзыка, вÑе получилоÑÑŒ заменой файла как опиÑывали Ñ Ñамом начале темы. Язык ÑменилÑÑ, меÑтами кривовато, но терпимо. Далее. Решил попробовать Ñменить оболочку навигашки, в папке prg1/apl удалил файл navi.exe и вмеÑто него Ñкопировал вÑе файлы от навитела, переименовав navitel.exe в navi.exe. Однако, еÑÑ‚ÑŒ проблемка, не могу наÑтроить com порт gps приемника. Ð’ данный момент уÑтановил навител 9.6, буду пробовать другие Ñборки. ПоздравлÑÑŽ Ñ ÑƒÐ´Ð°Ñ‡Ð½Ñ‹Ð¼ ÑкÑпериментом! У Ð¼ÐµÐ½Ñ Ñ‚Ð¾Ð¶Ðµ MRZ-90. То еÑÑ‚ÑŒ доÑтаточно поменÑÑ‚ÑŒ файл PF090JPJPN.LNG. ? И перезапуÑтить ÑиÑтему. Или нужно отÑоединить клейму аккумулÑтора? Quote Link to post Share on other sites
kims Posted December 19, 2017 Report Share Posted December 19, 2017 Hello all my friend I have pioneer Avic -F860BT iam looking for the test mode fichier Can some one help me to unlock my radio code i talk me password Thanks All Quote Link to post Share on other sites
javed akhtar Posted December 20, 2017 Report Share Posted December 20, 2017 ПоздравлÑÑŽ Ñ ÑƒÐ´Ð°Ñ‡Ð½Ñ‹Ð¼ ÑкÑпериментом! У Ð¼ÐµÐ½Ñ Ñ‚Ð¾Ð¶Ðµ MRZ-90. То еÑÑ‚ÑŒ доÑтаточно поменÑÑ‚ÑŒ файл PF090JPJPN.LNG. ? И перезапуÑтить ÑиÑтему. Или нужно отÑоединить клейму аккумулÑтора? you only need to replace the files. you do not need to remove the battery. Quote Link to post Share on other sites
javed akhtar Posted December 21, 2017 Report Share Posted December 21, 2017 when i run the igo on my mrz he cant find the gps but its getting my local time set. i thing navigation get to the right port but its lock by pioneer. wonder if we can get a developer test mode key then will be acces to more options Please share the link where you downloaded the IGO, I will try on my mrz05 and report back to you. Quote Link to post Share on other sites
javed akhtar Posted December 21, 2017 Report Share Posted December 21, 2017 Hello all my friend I have pioneer Avic -F860BT iam looking for the test mode fichier Can some one help me to unlock my radio code i talk me password Thanks All try the method provided by DZO in earlier posts. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.