jscheier Posted March 16, 2008 Report Share Posted March 16, 2008 I just got the LG VX 8700 - and I can connect but once I shut off the D3 or my phone I can no longer auto connect. Auto Connect is selected on the D3 Incoming security on the LG is set on always connect I've tried all steps suggested and this one http://www.avic411.com/forum/viewtopic.php?t=11873 to a T. Still is doesnt seem to work. could the blue tooth be shutting off when I close my phone? only thing I can think of. HELP as I can't return this phone and it was not cheap. thanks J Quote Link to post Share on other sites
jscheier Posted March 16, 2008 Report Share Posted March 16, 2008 I just returned this phone. It had other limitations which I didn't like. I bought the Samsung U 740. I was able to tranfer the phone book but I can't auto connect. Any advise on how to auto connect? thanks J Quote Link to post Share on other sites
t4o6o2l Posted March 16, 2008 Report Share Posted March 16, 2008 Service Provider: Sprint Phone-SW Version: Sanyo M1 Autoconnect: Yes Basic Function: (Make & Recieve a call, Call History, Preset Memory) Yes, however cannot edit names to preset memory. Phone Book Transfer: No & does not work with pushing 1 contact at a time either. Voice Calling: Yes Signal & Battery Strength Indicator: Yes BT Audio Capable?: Not tested On thing that I tried was that I bluetoothed my contacts to my laptop in vcard format, then paired my laptop with the D3 and promptly it allowed me to import my vcards from my laptop. However, since I cant figure out a way to share the phonebook with my Sanyo M1, it appears that all was for not. Anyone have any ideas on this? Quote Link to post Share on other sites
jscheier Posted March 17, 2008 Report Share Posted March 17, 2008 I just spent 2 more hrs in my car and no luck. My BB 8703e always connected. what am I doing wrong? everyone else said that the Samsung would connect auto thanks J Quote Link to post Share on other sites
withinavoid Posted March 17, 2008 Report Share Posted March 17, 2008 Concerning Samsung, I have the A900 and it took me a few tries to get it working right. At first I did the connect to phone from the AVIC-D3, worked but would not auto-connect. Then I deleted the registered phone in the D3 and same on my samsung and instead initiated connect from my phone. it said it paired but didn't work. Finally I deleted all again and connected from the D3 with the auto-connect off, worked, then enabled auto-connect and all working great. Only thing left to get is the phonebook transfer which doesnt work for me at all, not even one contact at a time. Good luck Quote Link to post Share on other sites
jscheier Posted March 17, 2008 Report Share Posted March 17, 2008 just tried this and no luck. I must be doing something wrong. I turned off all the features that are displayed on the bottom (auto answer, connect, echo ....) then I cleared all the phones and shut off my car. I then paired my phone w/ the D3 and then turned on the options including auto connect. I turned off my car again waited for the phone to disconnect and turned the car back on and NOTHING this is beyond frustrating. any other suggestions? I think I've tried everything. Parking brake on, off, half way - everything. I can pair the phone just can't auto connect (which is the most important thing to me). thanks J Quote Link to post Share on other sites
kaplan_reject Posted March 17, 2008 Report Share Posted March 17, 2008 just tried this and no luck. I must be doing something wrong. I turned off all the features that are displayed on the bottom (auto answer, connect, echo ....) then I cleared all the phones and shut off my car. I then paired my phone w/ the D3 and then turned on the options including auto connect. I turned off my car again waited for the phone to disconnect and turned the car back on and NOTHING this is beyond frustrating. any other suggestions? I think I've tried everything. Parking brake on, off, half way - everything. I can pair the phone just can't auto connect (which is the most important thing to me). thanks J this may sound a bit trivial... but... did you register it? just making sure.... Quote Link to post Share on other sites
jscheier Posted March 18, 2008 Report Share Posted March 18, 2008 Yes. I was told that they changed the firmware in the Samsung and it wouldnt work w/ any blue tooth. I didn't want another blackberry but I got the pearl. works like a charm. thanks for all the help. Quote Link to post Share on other sites
bcatch22 Posted March 20, 2008 Report Share Posted March 20, 2008 I've got a verizon GzOne and I can't get it to bond. If I search the device through the phone it comes up, and if I search the phone through the unit it, it comes up but when I try to put in the code and bond them it says "incomplete" and won't bond. I've got an LG on there so I know it works but I can't get the address book to pull over. I'm more concerned with getting my GzOne put on. Anyone got any ideas? Quote Link to post Share on other sites
howie_long4 Posted March 20, 2008 Report Share Posted March 20, 2008 My Samsung Blackjack does'nt work with the avic-d3 it will only hook up but wont upload the phone book Quote Link to post Share on other sites
howie_long4 Posted March 20, 2008 Report Share Posted March 20, 2008 My Samsung Blackjack does'nt work with the avic-d3 it will only hook up but wont upload the phone book Quote Link to post Share on other sites
DJCZer Posted March 21, 2008 Report Share Posted March 21, 2008 Sprint Mogul 6800 ROM 2.17.651.0 radio 1.47.01 Installed Jetware and ALL the functions work including phone book transfer. Slow searching but it works. I had a problem pairing them up for a few days...then reset the BT adaptor and all is well now! Auto connects, works 100% I am using the latest ROM and radio (3.35) with A-GPS and Rev-A. Have you upgraded your Mogul? and if so does the pairing still workin perfectly? I'm thinking I may need to reset the BT adaptor in the car as well. Let me know please. Quote Link to post Share on other sites
TonyG3sc Posted March 22, 2008 Report Share Posted March 22, 2008 Service Provider: Cingular (AT&T Wireless) Phone-SW Version: Samsung D807 Autoconnect: Yes (register 807 in the avic d3) Basic Function: make call/receive call ; speed dial Phone Book Transfer: no everytime i tried phone gets disconnected Voice Calling: Yes Signal & Battery Strength Indicator: Did not look at time BT Audio Capable?: i can connect but did not test if it works D3x kit on an Audi 2004 S4 Quote Link to post Share on other sites
TonyG3sc Posted March 22, 2008 Report Share Posted March 22, 2008 I just returned this phone. It had other limitations which I didn't like. I bought the Samsung U 740. I was able to tranfer the phone book but I can't auto connect. Any advise on how to auto connect? thanks J did you register your phone in the d3? you have to in order to auto connect. page 106 and 109 on manual Quote Link to post Share on other sites
TonyG3sc Posted March 23, 2008 Report Share Posted March 23, 2008 Service Provider: Cingular (AT&T Wireless) Phone-SW Version: Samsung D807 Autoconnect: Yes (register 807 in the avic d3) Basic Function: make call/receive call ; speed dial Phone Book Transfer: no everytime i tried phone gets disconnected Voice Calling: Yes Signal & Battery Strength Indicator: Did not look at time BT Audio Capable?: i can connect but did not test if it works D3x kit on an Audi 2004 S4 phone book transfer works! one at a time though after you finish registering the d807 in the avic d3 ; you go to phonebook transfer this will make the d807 disconnect dont panic on you d807 you could go to your contacts and send each contacts' detail via bluetooth and voila. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.