hayes40oz Posted July 18, 2015 Report Share Posted July 18, 2015 Kar: I've never assumed that the BT update will be "automatically" taken care of at the same time the Pioneer update is done. So I just do it manually to make sure. Can't hurt right? Same procedure as the firmware update except you go to the BT page and update from there. How/Why are you upgrading Bluetooth separately? I assumed that following Pioneer's instructions would update the firmware and Bluetooth at the same time (or, perhaps to be more precise, sequentially). Updating my 8000 to 1.10 via an SD card went smoothly, but now I'm concerned I've missed out on a Bluetooth update. The firmware upgrade takes care of the Bluetooth as well. I tested it and you don't need to upgrade it separately unless the instructions tell you to. By upgrading bluetooth separately all you do is wipe out your bluetooth settings. I assume if they want you to upgrade bluetooth without updating the system you can, but you don't have to. Quote Link to post Share on other sites
EvgaGaming Posted July 18, 2015 Report Share Posted July 18, 2015 Can anyone comment on what affect this 1.10 update has on the Maestro/Idatalink performance. The results of this update will determine whether or not I decide to add the Maestro SW to the AVIC 8000NEX to my 2011 Toyota RAV4. Quote Link to post Share on other sites
onebyside Posted July 18, 2015 Report Share Posted July 18, 2015 the 8000 boots much quicker after the fw update Quote Link to post Share on other sites
vietnight Posted July 18, 2015 Report Share Posted July 18, 2015 anyone see android auto option in setting? Quote Link to post Share on other sites
jhren Posted July 18, 2015 Report Share Posted July 18, 2015 Can anyone comment on what affect this 1.10 update has on the Maestro/Idatalink performance. The results of this update will determine whether or not I decide to add the Maestro SW to the AVIC 8000NEX to my 2011 Toyota RAV4. A Maestro SW shouldn't be affected at all, as it just plugs into the hard-wired remote control jack. If the firmware affects anything, it'd be Maestro RR issues. Quote Link to post Share on other sites
donmontalvo Posted July 18, 2015 Report Share Posted July 18, 2015 Can anyone comment on what affect this 1.10 update has on the Maestro/Idatalink performance. The results of this update will determine whether or not I decide to add the Maestro SW to the AVIC 8000NEX to my 2011 Toyota RAV4. I swapped out my iDatalink Maestro RR for the PAC unit because of the i-MId issue. I'm going to guess this update doesn't fix the i-Mid (but I'll have my fingers crossed that it does). I still have the RR. Quote Link to post Share on other sites
joemamma1954 Posted July 18, 2015 Report Share Posted July 18, 2015 Delete Quote Link to post Share on other sites
EvgaGaming Posted July 18, 2015 Report Share Posted July 18, 2015 Delete Delete? Quote Link to post Share on other sites
EvgaGaming Posted July 18, 2015 Report Share Posted July 18, 2015 I swapped out my iDatalink Maestro RR for the PAC unit because of the i-MId issue. I'm going to guess this update doesn't fix the i-Mid (but I'll have my fingers crossed that it does). I still have the RR. What is this i-Mid error? Quote Link to post Share on other sites
EvgaGaming Posted July 18, 2015 Report Share Posted July 18, 2015 After doing the update, I discovered the "Fuel" function is greyed out. That really sucks since that was one of my favorite features. Did anyone else have this problem? Quote Link to post Share on other sites
donmontalvo Posted July 19, 2015 Report Share Posted July 19, 2015 What is this i-Mid error? http://www.crvownersclub.com/forums/20-mobile-electronics/60153-idatalink-maestro-rr.html#/forumsite/20559/topics/60153 Quote Link to post Share on other sites
joemamma1954 Posted July 19, 2015 Report Share Posted July 19, 2015 Delete?I posted in wrong thread. Quote Link to post Share on other sites
onebyside Posted July 19, 2015 Report Share Posted July 19, 2015 anyone see android auto option in setting? no I didnt, but you can be certain that would be mentioned in the fw change log if it had Quote Link to post Share on other sites
hayes40oz Posted July 19, 2015 Report Share Posted July 19, 2015 I have the avic 4000 and with update 1.09 I have noticed a big difference in the performance of Car Play. Before the podcast app and the overcast app for example wouldn't refresh properly on the display avic unit until I opened the app on my phone first. Now it works as expected. I also noticed improvements in the Apple Maps, before the horizon sometimes wouldn't adjust when you were moving and just stay blue. It seems like the directions said it was mostly bug fixes behind the scenes. Now we just need a Waze Car Play app and all would be well in the universe. Quote Link to post Share on other sites
huddy Posted July 19, 2015 Report Share Posted July 19, 2015 Just updated my 6000. Nothing is different, but I haven't played with it yet. It does completely reset your Nav. So any saved locations are completely wiped. Went through the Nav set-up wizard as well. Had to turn off the speed warnings, adjust my voice commands, etc, etc. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.