kellinaradway Posted October 3, 2015 Report Share Posted October 3, 2015 Here it is guys. Hopefully someone can hack it for you. https://www.dropbox.com/sh/se83vkxrr3zicke/AAAGlyjv9wvlcfEqX-gt2haJa?dl=0 Quote Link to post Share on other sites
RonS Posted October 11, 2015 Report Share Posted October 11, 2015 Here is the nag screen hack for this release (v6.0) Apply this binary patch to /USER/PRGn*/APL/NAVI.EXE at offset 0xBEC64 change 05 00 00 0A to 00 00 A0 E1 *See below for the correct path to the file for your unit. Note: do not install the upgrade with the edited file on the SD. If you do, the installation will fail. After it is successfully installed, you can use a copy of the one on the SD (in UPDATE\USER\PRG\APL) to patch, then use a separate SD with testmode.key and the patched NAVI.EXE on it to update your unit. I recommend not modifying the file on your installation SD. This is dangerous - especially for noobies. Make a backup of any files you change - in fact making a backup of all files under \USER is a good idea. * there are two \USER\PRG directories on your HU. The active one is indicated by the presence or absence of a file named \USER\PRG.FLG If this file is not present, the active files are in \USER\PRG0\APL. Otherwise, the active files are in \USER\PRG1\APL Quote Link to post Share on other sites
RonS Posted October 12, 2015 Report Share Posted October 12, 2015 People looking to install this on a Z110B, Z120, Z130, Z140, X920, X930, X940: Save yourself lots of reading and go to post #84 in this thread, Quote Link to post Share on other sites
RonS Posted October 13, 2015 Report Share Posted October 13, 2015 Removed - obsolete for this upgrade - skip to post #84 Quote Link to post Share on other sites
pionara Posted October 19, 2015 Report Share Posted October 19, 2015 you can use the same VERINFO.DAT they used in the 2015 European Map Update thread. Quote Link to post Share on other sites
randomwalk101 Posted October 20, 2015 Report Share Posted October 20, 2015 I have the 130BT unit, can someone put the VERINFO.DAT and CARDINFO file that will work for this unit? I have 2013 map on my unit now. Can I use the same VERINFO & CARDINFO file from then? Thank you. Quote Link to post Share on other sites
randomwalk101 Posted October 20, 2015 Report Share Posted October 20, 2015 Link on 1st post now only list firmware...where's the new 2015 map update? Can someone please repost? Thanks. Quote Link to post Share on other sites
kellinaradway Posted October 20, 2015 Author Report Share Posted October 20, 2015 I have the 130BT unit, can someone put the VERINFO.DAT and CARDINFO file that will work for this unit? I have 2013 map on my unit now. Can I use the same VERINFO & CARDINFO file from then? Thank you. I would say no Quote Link to post Share on other sites
kellinaradway Posted October 20, 2015 Author Report Share Posted October 20, 2015 Link on 1st post now only list firmware...where's the new 2015 map update? Can someone please repost? Thanks. Give me a few minutes and it will be back up Quote Link to post Share on other sites
randomwalk101 Posted October 20, 2015 Report Share Posted October 20, 2015 Thanks bro... Quote Link to post Share on other sites
randomwalk101 Posted October 20, 2015 Report Share Posted October 20, 2015 you can use the same VERINFO.DAT they used in the 2015 European Map Update thread. By using the VERINFO.DAT that you patched, we don't have to mess with the RenewalFlib.dll file mentioned in post #3 above? Quote Link to post Share on other sites
kellinaradway Posted October 20, 2015 Author Report Share Posted October 20, 2015 I have made this easier for those with the earlier models. Verified to work on the Z120 and should work on the Z110 and X920 as is. I have used the Patched VERINFO.DAT and confirms it works on the Z120. Simply download the 3 files and unzip them and put them on the root of a SD card. Insert the card in the radio and push Yes to update. The radio takes over at that point. If anyone needs detailed instructions then PM me and I can email you a document that should help. If this helps and your in the position to donate, all are welcome. Paypal Kellinaradway@yahoo.com Anything you can donate helps offset the cost. Thanks Kellina Link https://www.dropbox.com/sh/o24crgm0me8eph7/AADECBSiL89NqNTv56Iz6iLPa?dl=0 Quote Link to post Share on other sites
randomwalk101 Posted October 20, 2015 Report Share Posted October 20, 2015 Thanks for your help on this. Unfortunately I have the Avic 140BT unit. It looks like I will need the CARDINFO file. Any idea how to get this file to get it working? Thank you. Quote Link to post Share on other sites
randomwalk101 Posted October 20, 2015 Report Share Posted October 20, 2015 I imagine for the 140BT, I can use the CARDINFO file from this thread (2013 map), it would work or does CARDINFO changes with each version? http://avic411.com/index.php?/topic/38472-2013-usacan-maps-download/?hl=cardinfo Quote Link to post Share on other sites
RonS Posted October 20, 2015 Report Share Posted October 20, 2015 you can use the same VERINFO.DAT they used in the 2015 European Map Update thread. Great. I suspected that, but I had already installed my 2015 upgrade, so I couldn't test it. I didn't want to ask someone to be the guinea pig. A few years ago someone (probably you) posted info on the contents of CARDINFO. Is it easy to modify to support Z130/Z140? Or will the ones from their last update work here? Since we now have the easy way to install I deleted my RenewallFlib.dll hack instructions in post #3. It will be less confusing going forward. I don't think anyone used it anyway. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.