pim_simons

anybody have any idea where i can search for this, i checked the data.zip but dont know exactly what to change. anybody from europe (netherlands) with the same problem?

Recently i tried using AVIC Feeds, while there are some problems it does work. the .kml file you get needs to be put on an sd-card or usb-stick, you can use AVIC Feeds for that. AVIC Feeds will automatically put the .kml file (and icon if you created a custom icon) on the sd-card/usb-stick in the correct folders. Make sure you put the sd-card/usb-stick in your device before your power it on. once it is all started up you get your custom POI's listed between the existing POI's. I used http://www.poiplaza.com/ to get the POI's i needed. (download in iGO 8 kml filetype) The limitatio

on version 2.0 (European F700bt) the unit always displayed the mobile speed trap icon when in 3d mode. however since i updated to version 3.0 i noticed that the mobile speed trap icon is not displayed in 3d mode, only in 2d and 2d-north-up. the traffic info is shown in 3d mode, its just the mobile speed trap icon that is not displayed. does anybody have the same problem, is there a fix for this?

does anybody have an idea how i could get the 3d buildings to work. i have an f700bt and live in europe, i installed the legal update to 3.0. i checked on my device but i do not have any .3dc files in the building folder. what are the steps to get this to work? i guess i need to find the .3dc files, do i also need additional license files? and how about a hacked ezrider? (i have the legal 3.0 update) any help on this would be greatly appreciated, i tried getting this all to work on my emulator but so far i have not been succesfull

so i updated my european f700bt to 3.0 yesterday. great improvement overall, i have only one problem i cannot figure out. i always have the navigation sounds off (the "turn left here" etc. sounds are off) however this also removes the sound of the speedcam warning, is there anyway to have the sound of the speedcam warnings on and the navigation sounds off

as far as i know it is not possible to order the update in Europe yet. i have not contact pioneer directly, the car dealership where i purchased the unit was told by pioneer that the update was not yet available for order (this was a week ago) i will be at the car dealership on wednesday and will ask them again about the status of update 3.0 if he has some news i will let you know

really looking forward to the video (and the actual update ofcourse) any chance you can share this update with us?

sucks about the delay until september... i was hoping to update to 3.0 before i went on my vacation to italy. on the other hand, i'd rather have the 3.0 in september bugfree than the 3.0 in july with all sorts of problems

i have to say it looks pretty good, does anyone know if with the 3.0 update it is possible to switch between FM radio presets with the knob

any update on your progress? is there really a difference in VBR and non-VBR when played on the pioneer nav?

ive had my f700 unit (europe) for about 2 months now and never experienced problems with the sd-card up until now the past week i went on vacation and put a whole lot of music on my sd card in different folders. with the music in different folders some songs get cut off too soon (ive seen some posts about this problem but no solution is available) but my biggest problem is that sometimes when changing songs between folders the whole system shuts down and reboots other times at completely random moments the music stops playing and the sd-card is not recognized anymore, not even other

you are not the only one, i had this problem once also on my f700bt with a mio a701 phone connected. happened about a week ago and havent had this problem since, but if someone knows a solution it would be awesome

this mod sounds exactly like what i need. one question though, does this mute button also mute the speedcamera sound?

i searched the forum and did not really find an idiot proof solution to the dog barking sound. unfortunately i do not really understand the solution by ShineOn... could someone please post a step by step guide (or at least the place where i can find the dog barking wav in the data.zip) on how to replace the dog barking sound with a normal sound?

this sounds perfect to me. does anybody have any idea if this is possible?