titos

Ok here is my situation any advise would be appreciated in advance.Well the unit was giving me the pioneer logo then the black screen continuasly so i called pioneer they told me go to their website download the new software and i sholud be good. Turns out im not now the unit boots and gets stuck on the pioneer screen about 30 seconds later if I push either the menu or the map key it takes me to the main screen but no functions work. So i decided to go the 3.0 update route from the x910 downloaded the torrent and the 3.0 install file great but when im in the blue screen trying to format the wi

from what i i know get it at the wheel speed sensor

it sounds to me you 12volt wire is either unpluged or the fuse popped

Speed Sense blue/white ECM/PCM Notes: The ECM/PCM is on the front of the transmission tunnel. The connectors are on the passenger side. On the 4 cylinder models the VSS wire is in the white 31 pin connector E, pin 26. On the 6 cylinder models it is in the gray connector A, pin 11. Brake Wire white/black + brake pedal switch Parking Brake green/orange - top of fuse box, large white plug Radio 12v white/green + radio harness Radio Ground black - radio harness Radio Ignition yellow/red + radio harness Radio Illumination red/black + radio harness Factory Amp

are they based out of valencia cal if they are you should be fine as long as you have all original packaging it came with if not you might have a tough time

i dont know if anyone has tryed this yet but it seem to work for me i put a computer fan in the back on my radio blowing out of the radio and have not had the problem since the reason i used a computer fan is i can hook it up directly to my acc. wire vs. the pioneer fan turns on at a certan temperature i think well anyways a 120 inch fan worked for me

well you bought to much for you to handle kit seems like i agree with the guy above if you want another unit go with the kenwood its simple and the gps on it is made by garmen you should be familiar with the interface on the gps part also your factory unit you cant even use it til you read all the warning labels on it atleast the pioneer you can still use your stereo without having to press the ok button sorry guy it just seems to me your being alittle anal about the situation keep reading the forum about acouple things then go to your nearest local shop and tell them to bypass the unit then y

welll if a shop fabricates one it could be expensive 60 to 80 bucks but im telling you if you look for an american international kit all you have to do is buy a new kit and done

CHECK to make sure the guy had a metra kit cuz all the metra kits ive used suck look at the american international kits they seem to work better for me

i agree if this guy knows so much why dont he figure it out all we are trying to do is put our heads together to try to figure this thing out so if your going to be negetive stay out PLEASE!!!!!!!!!!

im sorry guy but i personally think the whole back door hack is a fluke because it only seems to work on 50% of the people here on this forum

what file are you looking at in the prgo folder

hey itl2007 i have been working on those same lines i found that if you delete those lines off the z2 when the z2 boots it says unknown application and it stays on the black screen then i tried to replace those lines whith the z1 in the same file same number line and it did the same but if you compare the 2 files from the z1 to the z2 and you will notice that the statechangebypkbstatus and all the other lines you were looking at are in the z1 file aswell just in a different line this is what i have noticed i worked hard on the bypass for about a month then i got tired of playing with it and n

i tryed to switch the files you are talking about and my z2 will not boot after i switch the files it gives you a application not availabe screen but if anyone has a working ftp site i will give you an image of my z2 drive just message me

well evey dll file i tried to replace on the z2 harddrive wit the z1 prevents the z2 from booting so i gotta find exactly what dll file is responsible for the bypass then play with the script on that 1 file to get it to work but i have been working by myself on this and theres alot of files that look to be the bypass but still cant get ti to work but we will find it one way or another and also on a side note i am a local shop owner and let me tell you the kenwood your looking at suck compared to the z2 just be patient and the bypass will come

why dont you find out if yor friend grounded it

i think what we need to know is exactly what people accessories we have installed with the z2 like the bluetooth ipod adapter etc.. because it only works on mine for a couple miles then stops and it seems other people are haveing the same probem and others arent the unit is to new for them to release diffrent types of software so its gotta be in the accessories

yup

well from what i see the speedometer on the nav doesnt work and my navs already calculated so everything works but the speedometer and also watching tv comes and goes so we got alot of work to do before we congratulate our selves but hey its a start and more than any of us can come up with so it will have to do for now i guess

ok i did it and if you disconnect the vss wire your vehicle dynamics go away and also once my z2 calibrated about 10 miles it shut the movie off and then told me the whole warning while driving crap we all hate but he is truely on to something now we just need to perfect it

let me get a cpouple things straight we have to disconnect the vss wire permantly and do we also have to reset our z2 everytime we start our cars if we wanna watch dvd

there is no usb plug on the z2 it looks identicle to the z1 and the bypass is in the harddrive like i have been saying i got it to play movies while driving but the streets disappear then i got it to finally be able to use all the other nav functions while driving and it looks to all be in the same file just in different lines i have been working on the harddrive witha program called hexcmp and it all seems to be on the prgo folder i hope this helps you guys out alittle bit but keep in mind everything is gonna be in the harddrive

its not as simple as you think i have been working on that for a couple weeks now

does anybody have the headlight flash bypass on their z1 and got the hard drive unlocked if anyone does please contact me a.s.a.p so i can know exactly what i need to change i figured what file i need to change but i cant just change the file i need to change the properties of the file

hey there everyone i got a couple glitches on bypassing the z2 im able to watch tv while driving but then the streets disappear on the navigation so im working on trying to find out why also try using a 32k ohm resistor on the bypass i dont know if it will work or not but a buddy of mine said that his rep was talking about the resistor in the mean time i am working on the hard drive to fix the minor glitch