minifreezer

It will work just fine. I know of people that have used the f90bt flash disk back up on their f900bt. The only thing is that it deffinatly can not be the f500bt back up.

do a search for turboss on this forum. It is an ftp site that hosts 2.0 backups for the f-series

Install went fine, but now i have a reboot prob. Its strange, if my first phone call i make after boot up is made useing VR the system will reboot, and if i try after reboot using VR it will reboot again. Now if i make a call useing the contacts screen for the first phone call there are no probs and i can ure VR after that. I just cant ure VR to make the first phone call after the system starts up. I do not have an ipod so i cnat try the VR on that to see if it reboots. Any suggestions would be helpful. P.S. I have tried updateing the BT software.

Yes to every question you have. Just read the hacks thread, there is more info on anything you want to do including reverting back to 2.0. I have the hacked 3.0 and about to downgrade back to 3.0 so i can install my legit version of 3.0 that i have ordered. Just been waiting for the password webpage to come back online..

Cant sell it to you. You will not be able to install it. Once you put in the codes and have Pioneers web site generate your key that media code for the sd cards are now locked to the unit code that the original person provided to pioneer. Now if you can hack it more power to ya.

What? Really that is what you got to say you inconsiderate douche. He posted in the x-series, so my guess you retard is that it is for the x-series. Also this whole forum only deals with AVIC made by Pioneer so do some of your own work and go to Pioneer's web page and look for yourself. But no your feeble little mind can't do that so you just call someone a moron because of your own shortcomings and not wanting to do anything for yourself. You know if you ask anyone on this forum i am a nice guy, never insult anyone and usually do not respond to idiotic post like this, but your post my f

You are probably going to be ok. I did the hacked version of 3.0 and formatted myflashdrive during the wince upgrade and it kept my custom splash screen.

The 30 sec wait should be because the gps is getting a signal. The scrolling through the 2d, Nup, and 3d to get what you want should not be happening. It should stay on the view you left it in when you tuned off the car. I wonder if you got a bad install and maybe reinstalling the software will fix that.

If you do a search for reboot probs there are multiple fixes and threads ond the subject. Just start reading them and one of the fixes will work for ya.

It might. When i upgraded to 3.0 i did the 3.01 immeditally afterwards and my system is not doing what yours is doing.

Sorry just found out that the option i was talking about was in 2.0. I noticed when i had 2.0 my nav wuld act weired when stopped and then when i selected the snap to road option or always on road (can't remember the exact name) it stoped dong that. I am work right now and rode my bike or i ould go outside and try to find out if the option is still in 3.0. The waypoints you should be able to press the map button to get rid of it. As far as i know the way point is the last place you were at between power cycles.

do a POI search and type the name of the store. I have also typed in what i was looking for and the unit gave me stores that had it.

Mine does that too. Someone explained to me why, but can't remember the whole explanation. Anyways it has to do with the timezone, but the unit does not really "think" you are in idaho. Make no damn since to me and Pioneer definatly should have fixed that.

What causes a fuse to blow is too much amperage draw. This could be cause by a short (voltage straight to ground without anything providing a voltage drop), high resistance (bad connection causing the system to work harder and demanding more), or the system itself could have a component in it that is bad (shorted). When does the fuse blow? If it blows as soon as you turn the key then probably you have a short. Could be the insulation chaffed and now you have bare wire touching ground (anything metal that is bolted to the chassis), or the system itself is bad. Probably wiring though. I

I had the same issue after i had updated to the 2008.4 maps. i had had a corrupted file so i had to DL the maps again and then delet and re-copy them back to my avic and that fixed the reboot for me at a specific location. BTW i also deleted and reinstalled the POI's for good measure. Hope this helps you.

if you do a search there are multiple post that have 2.0 flashdrive for DL.

probably because the files that adam provided have the software mod pre-installed

In navi settings i beleive there is an option to snap to road. Turn that option on and that should fix it.

Damn keep that looks good. Wish i could do what you, IDT, and the others do...... F-it i might just have to dig in and try. Hell if i brick my unit i have a complete back up.

If you dont mind coud you upload the X-series flashdisk to. ftp://www.turboss.com Username: avicuser Password: Avic411 I am sure lots of peeps would want to do this.

I beleive after 3.0 all nav mods will be null and void due to the igo update from 8.0 to 8.3. I could be wrong and if i am someone will let me know. Probably some of the gui interface mods will be no good either because 3.0 is adding some new features and changing some of the interface. Guess we will find out when it gets here.

(About uploading the complete flash contents) The IGO 8.3 and the maps are available elsewhere, and I don't think you can do anything with them without my licence files anyway, which I obviously am not going to upload. The WINCE Update is also available elsewhere (check the link I posted earlier). So what are you missing? Paul I can see not up'ing the license but igo8.3 is a special skinned version that was written to work with the avic and the avic's (pioneer) software. Without that version of 8.3 the system will reboot itself because the sys is looking for ezrider (igo8.3) to

I just re-upped the F90BT 2.0 backup again. I was told that someone was getting a coruupt DL from my original files....so i i posted it again, but as one big rar and not 17 parts. The original 17 parts are still there for those who do not want to DL almost 2gig in one swoop. If anybody elese is have probs with the F90BT (original 17 parts) backup please let me know.

It does not matter if you have a rearview camera or not. The unit will still turn the option on by itself. There are many peeps here that have had the unit turn the rearview camera on and they did not have one installed either. If you do a search for blank screen or black screen at boot up you should find the fix. Someone has the button combo that got the screen to show the main menue.

Did you try testmode v2.3?