felixgun

The torrent in the stickied forum post for the Z120BT firmware has the 2.0003 update. Click on the rar file, extract it, double click on the torrent, and only check off the "SD2" Folder, so you are just downloading that extra update. Then upload that folder labeled "Firmware" to the root drive of your SD card. Then go to your bluetooth settings on the nav screen and click on the 'update firmware' button. Afterwards, make sure you run the steps above (Posted by RonS) to get check the REAL firmware version. Going to settings and checking it in there will only show the 2.00000 (EVEN if you h

anytime... even though HD Radio sucks (in my area at least... not enough HD Radio stations)

haha i would return it too if it wasn't installed in my car already. I enjoy the Z120BT firmware update/UI refresh which makes the HD Radio aesthetically pleasing, but just as useless as on the Z120BT software... Once more HD radio stations populate maybe I will use it more, but for now, this source is never selected for me.. I don't listen to normal radio after having an iPod/USB connection and an SD card for music/movies...

i'm glad about the 130 upgrade.. pioneer page: http://www.pioneerelectronics.com/PUSA/Car/GPS-Navigation/AVIC-Z130BT copy and paste from their page: • Listen to Your Pandora Internet Radio Stations using an iPhone® with Pandora App • Built-In Traffic Tuner • Built-In HD Radio™ Tuner

vblue-- there are times when getting it from ebay is a good deal... i got a JL audio 250/1 amp that retails for 300 for 62.99 plus 11.00 for a squaretrade warranty. Thats 74.00 for a whole amp plus a one year warranty, and if it breaks in that time, i get my 100% full money back from the pawn shop that's on ebay with 100% feedback that sold it to me... but yea you are right now, with electronics, it is so easy to get burned, but if you look hard enough, you can find great deals! On my z110bt though I bought it brand new from amazon.com and got the full rebate back.. paid less then 800 total b

i've had this issue. all you do is on the iphone 4, go to settings -> general -> bluetooth. turn it off and then on. when it sees the device, click the blue arrow to the side of it and click 'forget this device'. After that, go to settings on the z120bt screen and re-register the bluetooth. real easy.

First of all, the SD will not read if it is not in FAT32 format. NTFS is a better/faster file system without the 4GB file size limit, BUT it's not compatible with this and that is the default format usually. So FAT32 (what Windows 98 was on btw.......) is the only file system it will read. Google: "format SD card to fat32". You will find several ways to do this. The card isn't defective if you actually copied the files on there on your PC side.

i was wondering the same thing. thanks for the quick tip to view the correct version firmware!

OK... then how come it worked fine on my 3gs with the same bluetooth/ios firmware and the only thing that changed was the phone that was connected to it (3GS -> 4)? Anyways, this original post was on the original firmware 1.000 -- I just completed the Z120 update though... Now i'm on 2.003 using ShortFuse's cracked firmware/3.11 bluetooth firmware. I made a friend test call earlier and pick up with the nav screen and then switch to iphone speaker on the iphone 4 and... NO ringing! I -think- the bug is gone with the new updates. I updated screen firmware then bluetooth firmware immed

yep.. i use both on mine and didn't need a Y splitter

Well like you said vblue, the naming scheme does suggest the same port will be used in the back. Since there are no hardware changes AGAIN for the third year in a row, I guess they are going to use the existing port that transmits the same type of data to an existing port that will no longer work since the msn direct tuner has less then one year left to live... I own it and personally think it sucks and is a waste of money. Hopefully we -can- get the 130 update along with this new traffic tuner to replace the Beta-like tuner that never really works all that great. Also... On pioneer'

yea i read some of it but i was just wondering if it was confirmed yet. I just actually did the Z110 to Z120 SD card update. It says the Aha Radio service is only going to be compatible with the X930/Z130 only so I'm wondering if a new piece of hardware was added or not. If it doesn't, then hopefully the Z110/Z120 can be software updated to the Z130...

the answer to your question is yes. it works. perfectly. and to the guy above that wants pandora link on his ipod TOUCH in the car... -> Think about it. You are in the car driving, and you turn on your ipod touch and go to PandoraLink. Where is your internet coming from? Exactly. You are in a car. There IS no internet connection...UNLESS you have Edge 2G/3G(hspa,hspa+,etc.)/4G(LTE,etc.) So therefore, you have three options. 1) Jailbreak your iphone and install MyWi 4.0 in the Cydia app to create a wifi hotspot out of your 3G internet connection. Then go to settings -> Wi

great guide. worked the first time like a champ. thanks for the guide and of course thanks to avic411 and ShortFuse!

LOL. Why would you curse out a mod/staff member? That definitely won't get you any answers.

I noticed the hardware is STILL the same. I never opted for the z120bt update on my z110bt since it didn't really change much except for a prettier UI. Any chance that you can update the z110 to z130?

My screen has recently began resetting back to the splash screen and having to boot up. Every 2-3 minutes. It is extremely aggravating to not even be able to listen to a whole song without it resetting. I purchased in may 2010 from amazon so it should still be pretty fresh. Anyone else experiencing this or have a fix ?

yea i guess no one will with an avic-z110bt and an iphone 4 has yet to experience this but when i had my iphone 3GS it worked fine. But now it keeps ringing if it is on iPhone speaker or speakerphone. SO aggravating... obviously it's an iPhone 4 issue since it worked with my last iphone...

No the .avi files straight from torrent -> straight to SD do not play without conversion.. I personally have tried several (I have lots) just to make sure it wasn't that one .avi, and still nothing. If you rip the AUDIO_TS and VIDEO_TS from a DVD and stick it on an SD nothing will happen (including using the full navigation of the DVD menu which would be awesome). The only time you can use the DVD menu is when you are actually on the DVD input of the Z110bt. Otherwise you have to use the controls on the SD input. The SD file formats are very limited. If you rip the full uncompressed

I have an 08 Tahoe with the z110bt and I bought the PAC-OS4 (Bose/OnStar interface) and PAC-SWIPS (Steering wheel control interface) on amazon.com - way cheaper then your local car audio store

Thats exactly what I do... I receive a call -> pick up the call on z110bt -> **ringing stops over the speakers ** -> switch to either speakerphone or iphone -> ***ringing starts back up again over the speakers (while talking to the person on the other line!) *** Anyone else experiencing this issue?

I'm having the same problem. Currently Using Pac-SWIPS with PAC-OS4 in my tahoe and it intermittently works. How do you program from version 1 to version 2?

I too noticed the terrible quality of FM radio and installed HD radio. Equally terrible.. when it is on a digital station the volume of the station goes down and does not sound any clearer. If I could take it out of my car and return it, I would. If you are in a city with a lot of HD stations then it might benefit you, but if you have three digital stations (like I do) and the quality is still terrible, it probably won't be worth it to you!

I first had an iPhone 3GS hooked up to the z110bt and had no problems making/receiving bluetooth phone calls. When I got my iPhone 4, I disconnected the iPhone 3GS bluetooth connection and "registered a new bluetooth device". As soon as I did it, my phone rang through my speakers and I picked up through the screen. Worked GREAT. Improved mic quality from the 3GS (at least thats what the person on the other end says). BUT as soon as I switched to phone or speakerphone (vs. bluetooth audio connection), it immediately starts ringing again like I never picked up the call! So when I don't want

When I installed this screen I also did the PAC-os4 and PAC-swips (onstar/Bose and steering wheel controls)... I also did the parking break adjustment to view videos while not in park. Could this be causing the volume control from being changed while on the phone via Bluetooth?