ynguns Posted May 22, 2008 Report Share Posted May 22, 2008 I have toast 6 and can't copy the nav dvds at all please help Quote Link to post Share on other sites
VBLUE42 Posted May 25, 2008 Report Share Posted May 25, 2008 What problem are you having? Quote Link to post Share on other sites
bluonyx Posted June 1, 2008 Report Share Posted June 1, 2008 I just used the Cyberlink Power2Go burning software that came with my Gateway FX laptop and it worked on the first try. No decrypting needed, just used DVD to DVD copy. I used the lowest speed setting and a Sony DL DVD+R. Quote Link to post Share on other sites
Keve116 Posted June 8, 2008 Report Share Posted June 8, 2008 I just used the Cyberlink Power2Go burning software that came with my Gateway FX laptop and it worked on the first try. No decrypting needed, just used DVD to DVD copy. I used the lowest speed setting and a Sony DL DVD+R. Â Iam using those same discs but i keep getting errors. even when i went to write mode. it said operations failed and my drive i know is able to burn the discs. Â I take it back i tried again and it worked with no problems. Thanx guys Quote Link to post Share on other sites
bossgs4 Posted June 11, 2008 Report Share Posted June 11, 2008 I used freeware ImgBurn http://www.imgburn.com/ Â Memorex DVD+R DL Â 1. Start ImgBurn 2. Create Image AT 1X SPEED 3. Write Image AT 1X SPEED Â Voila you have a fully functional working DVD ! Â DaveC Quote Link to post Share on other sites
SultanofAcceleration Posted June 11, 2008 Report Share Posted June 11, 2008 i am using a macbook air with superdrive and memorex discs...i get about 60 percent of the way there and then they error. this is at 1x... Â i am using toast 9. Â can someone give me a idiots instructions? Quote Link to post Share on other sites
htko4316 Posted June 12, 2008 Report Share Posted June 12, 2008 Does anyone who successfully burned their discs want to sell me a copy? I just need a copy for the East Coast that works with N2 HU. Â Thanks, Quote Link to post Share on other sites
dmhines Posted June 13, 2008 Report Share Posted June 13, 2008 i am using a macbook air with superdrive and memorex discs...i get about 60 percent of the way there and then they error. this is at 1x... i am using toast 9.  can someone give me a idiots instructions?  I made my copy using Toast on my Mac. Make a disc image of the DVD ... then use the Toast Copy function and use the disc image you just created as the source. I used a DL DVD-R disc and it works fine in the D3. Quote Link to post Share on other sites
tmann05 Posted July 10, 2008 Report Share Posted July 10, 2008 Thx for the write up I will try this. Quote Link to post Share on other sites
Derf Posted August 5, 2008 Report Share Posted August 5, 2008 Use Image Burn. It's a free download. Set burn speed to 2.4. Â I was burning a West copy for a member that broke his original and I burned an East by mistake. if anybody needs an East, I send it to you for $5. with shipping. I use Verbatim dual layer DVDs. Â derf704@hotmail.com Quote Link to post Share on other sites
brahby Posted August 14, 2008 Report Share Posted August 14, 2008 I actually need both but since I live on the East I supposed I should start there Quote Link to post Share on other sites
davis449 Posted November 17, 2008 Report Share Posted November 17, 2008 I'll go ahead and post my results in this thread. I used Nero 7 Ultra Edition Enhanced v. 7.10.1 to burn my CNDV-80MT 2008 update discs successfully at 2.4X (that's the default slowest my burner will do). Equipment was a Dual Layer capable Dell CD/DVD +-RW drive (Dell P/N C3284-A00) in a Latitude D610 running Windows Xp SP3. I didn't want to mess with doing it on Vista so I did it on one of my laptops that had Xp. The computer I did it in was equipped with the 2.0 GHz Pentium M processor and 2 GB of RAM. The discs were Sony DVD+R DL. They ran me about $22 at Best Buy for a pack of 10. The first disc I burned was the East one and it ran fine. Took a total of 1.5 hours to burn it with data verification in Nero. When I did the West disc, it failed verification on a small number of tracks, but all was well when I stuck it in the unit (Avic D3). I'm running a second copy now to see if it passes verification. Â I should state that I purchased the discs from Pioneer for my parents N4 I'm installing for them over the Thanksgiving holiday. I used the actual Pioneer East disc for my initial update of the unit to ensure that nothing went wrong. I then swapped out the disc with the copied East disc and it was fine. I'm sure it would've been fine using the copied discs for the initial, but after the posts I read in the torrent threads on here, I wasn't going to take any chances. Â On a side note, the update itself only wiped out the custom background screen I had on the unit, the custom splash screen at start up I have stayed in tact. Quote Link to post Share on other sites
greyhd Posted December 18, 2008 Report Share Posted December 18, 2008 I used Nero Express and worked out great. Thanks to everyone for posting up the great tips. Quote Link to post Share on other sites
SDJASON Posted December 24, 2008 Report Share Posted December 24, 2008 locate the files that you saved there will be 3 different ones, a CPJ1184_1_A.I00 , CPJ1184_1_A.I01, and the one you need CPJ1184_1_A.MDS this is the one you will use to make the disc with. Â Ummm... If you rip the disk in ISO read mode, there will be only 1 file, an ISO (disk image) file. Â I believe dvd decrypter can create ISO's but by default it simply CLONES the entire dvd structure, inside a folder, while removing the encryption. So if you did this to a regionally encoded or copy protected dvd movie the resulting .vob files in the finished directory would be region/copy protection free. Â I too, have been using dvd decrypter for years, in combination with dvd shrink to produce flawless backup copies of nearly all my media. Id recommend it totally if it works Quote Link to post Share on other sites
bryan 337 Posted December 25, 2008 Report Share Posted December 25, 2008 Will someone contact me? I need a west coast disk. My friend just sat on mine today. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.