HAAK31 Posted June 23, 2009 Report Share Posted June 23, 2009 I know of some Igo8 mods(non-pioneer),that have a button on their menu to start wince, from there i was able to start tomtom on my previous machine, but only to start it, my machine lacked memory to run it. Quote Link to post Share on other sites
69sixpackbee Posted June 23, 2009 Report Share Posted June 23, 2009 Yes! V4.2Would it have anything to do with the fact that I am in the states and not Canada, eh? , nah, i just checked it again and the speed camera settings would just stay the same the whole, km values on top of the mi values, could you check your speedcam.ui for the code i posted above, regarding the zoom in planmode, i don't know but it just stopped zooming, i might add a zoom-in/zoom-out button on the planmode screen It is in my speedcam_ui but,....? ;SETFORMATTED_UNIT_TEXT txtSC_SpeedUnit "km/h" runif nCamSpeedUnit 0 'txtSC_SpeedUnit.SET "mph"' else_run 'txtSC_SpeedUnit.SET "km/h"' txtSC_SpeedValueMI.SHOW txtSC_SpeedUnitMI.SHOW txtSC_SpeedUnit.SHOW run sc_hscSC_Speed_OnChange sprSC_Type.PHASE "vTmp" sprSC_Dir.PHASE "vDir" runif vTmp 1 'txtSC_SpeedValueMI.HIDE, txtSC_SpeedUnitMI.HIDE, txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' runif vTmp 4 'txtSC_SpeedValueMI.HIDE, txtSC_SpeedUnitMI.HIDE, txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' Thanx! Bud Quote Link to post Share on other sites
ill.die.trying Posted June 23, 2009 Author Report Share Posted June 23, 2009 Yes! V4.2Would it have anything to do with the fact that I am in the states and not Canada, eh? , nah, i just checked it again and the speed camera settings would just stay the same the whole, km values on top of the mi values, could you check your speedcam.ui for the code i posted above, regarding the zoom in planmode, i don't know but it just stopped zooming, i might add a zoom-in/zoom-out button on the planmode screen It is in my speedcam_ui but,....? ;SETFORMATTED_UNIT_TEXT txtSC_SpeedUnit "km/h" runif nCamSpeedUnit 0 'txtSC_SpeedUnit.SET "mph"' else_run 'txtSC_SpeedUnit.SET "km/h"' txtSC_SpeedValueMI.SHOW txtSC_SpeedUnitMI.SHOW txtSC_SpeedUnit.SHOW run sc_hscSC_Speed_OnChange sprSC_Type.PHASE "vTmp" sprSC_Dir.PHASE "vDir" runif vTmp 1 'txtSC_SpeedValueMI.HIDE, txtSC_SpeedUnitMI.HIDE, txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' runif vTmp 4 'txtSC_SpeedValueMI.HIDE, txtSC_SpeedUnitMI.HIDE, txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' Thanx! Bud so did you got it sorted out? Quote Link to post Share on other sites
69sixpackbee Posted June 23, 2009 Report Share Posted June 23, 2009 Nope...still shows a larger font speed reading (MPH) above and a different displayed number which is smaller font below (also in MPH).. Quote Link to post Share on other sites
ill.die.trying Posted June 24, 2009 Author Report Share Posted June 24, 2009 Nope...still shows a larger font speed reading (MPH) above and a different displayed number which is smaller font below (also in MPH).. try this change this part txtSC_Speed.SHOW hscSC_Speed.VALUE nCameraSpeed hscSC_Speed.SHOW txtSC_SpeedValue.SHOW ;SETFORMATTED_UNIT_TEXT txtSC_SpeedUnit "km/h" runif nCamSpeedUnit 0 'txtSC_SpeedUnit.SET "mph"' else_run 'txtSC_SpeedUnit.SET "km/h"' txtSC_SpeedValueMI.SHOW txtSC_SpeedUnitMI.SHOW txtSC_SpeedUnit.SHOW run sc_hscSC_Speed_OnChange sprSC_Type.PHASE "vTmp" sprSC_Dir.PHASE "vDir" runif vTmp 1 'txtSC_SpeedValueMI.HIDE, txtSC_SpeedUnitMI.HIDE, txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' runif vTmp 4 'txtSC_SpeedValueMI.HIDE, txtSC_SpeedUnitMI.HIDE, txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' to this txtSC_Speed.SHOW hscSC_Speed.VALUE nCameraSpeed hscSC_Speed.SHOW txtSC_SpeedValue.SHOW SETFORMATTED_UNIT_TEXT txtSC_SpeedUnit "km/h" ;runif nCamSpeedUnit 0 'txtSC_SpeedUnit.SET "mph"' ;else_run 'txtSC_SpeedUnit.SET "km/h"' ;txtSC_SpeedValueMI.SHOW ;txtSC_SpeedUnitMI.SHOW txtSC_SpeedUnit.SHOW ;run sc_hscSC_Speed_OnChange sprSC_Type.PHASE "vTmp" sprSC_Dir.PHASE "vDir" runif vTmp 1 ' txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' runif vTmp 4 ' txtSC_Speed.HIDE, hscSC_Speed.HIDE, txtSC_SpeedValue.HIDE, txtSC_SpeedUnit.HIDE, txtSC_SpeedNo.HIDE' and in your speedcam_800_480 change this code to this haven't tried it but it should work, let me know how it goes Quote Link to post Share on other sites
scoffman Posted June 24, 2009 Report Share Posted June 24, 2009 i followed your instructions perfect. but i am having an issue. now when my system starts up it says "system startup in progress please wait" and it doesnt go away. what did i do wrong? please help thanks Quote Link to post Share on other sites
ill.die.trying Posted June 24, 2009 Author Report Share Posted June 24, 2009 i followed your instructions perfect. but i am having an issue. now when my system starts up it says "system startup in progress please wait" and it doesnt go away. what did i do wrong? please help thanks is this regarding v4.2? have you done any mods prior to installing it? could you tell me step by step what you did? Quote Link to post Share on other sites
scoffman Posted June 24, 2009 Report Share Posted June 24, 2009 ya for 4.2. i previously had the red light and speed camera mod installed. i followed your instructions on page 46 step by step nothing less nothing more. Quote Link to post Share on other sites
scoffman Posted June 24, 2009 Report Share Posted June 24, 2009 i also have the hardwire bypass done as well. not sure if that makes a difference. Quote Link to post Share on other sites
ill.die.trying Posted June 24, 2009 Author Report Share Posted June 24, 2009 i also have the hardwire bypass done as well. not sure if that makes a difference. try reverting back to your back up and see if it works, if it does, try putting my mod back and see what happens Quote Link to post Share on other sites
scoffman Posted June 24, 2009 Report Share Posted June 24, 2009 i also have the hardwire bypass done as well. not sure if that makes a difference. try reverting back to your back up and see if it works, if it does, try putting my mod back and see what happens reverted back to back up is now working again. im going to reinstall your mod. just to make sure i have this right. i am putting the files into apl2/igo correct? Quote Link to post Share on other sites
ill.die.trying Posted June 24, 2009 Author Report Share Posted June 24, 2009 i also have the hardwire bypass done as well. not sure if that makes a difference. try reverting back to your back up and see if it works, if it does, try putting my mod back and see what happens reverted back to back up is now working again. im going to reinstall your mod. just to make sure i have this right. i am putting the files into apl2/igo correct? yes, Quote Link to post Share on other sites
scoffman Posted June 24, 2009 Report Share Posted June 24, 2009 Got it working. when i reverted to my backup i changed everything back but the sound files and it didnt start up. but then i went back and changed the sound files back and it worked. not sure why but it didnt like the sound files. but it is up and running now and looks great. Wonderful job and thank you again for the help. Quote Link to post Share on other sites
ill.die.trying Posted June 24, 2009 Author Report Share Posted June 24, 2009 Got it working. when i reverted to my backup i changed everything back but the sound files and it didnt start up. but then i went back and changed the sound files back and it worked. not sure why but it didnt like the sound files. but it is up and running now and looks great. Wonderful job and thank you again for the help. no problem Quote Link to post Share on other sites
ashleyisagirlsname Posted June 25, 2009 Report Share Posted June 25, 2009 Any chance the sound files can be louder? In v4.2 I have the key volume and spoken volume all of the way up and i can just barely hear the camera alert voice when my music is at 50+ Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.