crash_rider Posted March 6, 2023 Report Share Posted March 6, 2023 Translated into Russian! Quote Link to post Share on other sites
hydyrov Posted March 11, 2023 Report Share Posted March 11, 2023 On 3/6/2023 at 5:39 AM, crash_rider said: Pioneer restorator Reading files *.ver ,*.prg ,*.iarc, *.dat (initdb.dat partially) *.ver files auto size check, crc files auto recalculation of cs and file sizes *.iarc files full unpacking with restoration of original paths and file names replacing the image to fit or smaller than the original size (for now) *.prg files auto size check, crc file and header auto recalculation of cs and sizes in file and header support for JP and EU versions Generating nb0 and hdr files nb0 for subsequent unpacking in utilities hdr to restore the prg file with subsequent recalculation of cs and sizes (selects nb0 and the hdr file (Created automatically when opening PRG) with the same name as PRG should be) p.s. Example In the settings, you can specify the disk where to collect the firmware, followed by editing all CRCs and sizes For example, in the ini file CopyAllTo=F:\ everything will be collected on disk F and files will be prepared 1. Open PRG, nb0 and HDR files are formed (the files must all be in the same folder) 2.Editing nb0. 3. Select our edited nb0, and wait for the program to create everything itself! It turns out the finished firmware on the disk Release.rar 1.13 MB · 1 download what models does it fit? Quote Link to post Share on other sites
crash_rider Posted March 12, 2023 Report Share Posted March 12, 2023 RZ-RW-RQ-ZH Quote Link to post Share on other sites
ONURARD Posted March 26, 2023 Report Share Posted March 26, 2023 hello i have avicmrz05 i have connected it to the car and i got an error like this. then I copied the files uploaded to the site for mrz99 as in the video. I deleted the original mrz05 files, after copying the mrz99 files, I got the error number 7 and the tape does not open at all, can you help? 1385911069_WhatsAppVideo2023-03-25at23_59_28.mp4 Quote Link to post Share on other sites
crash_rider Posted March 26, 2023 Report Share Posted March 26, 2023 2 ONURARD You deleted system files, system file load error (6-7-8), restore files from copy! Quote Link to post Share on other sites
hydyrov Posted March 27, 2023 Report Share Posted March 27, 2023 On 3/12/2023 at 6:56 AM, crash_rider said: RZ-RW-RQ-ZH is there a video on how to do it? Quote Link to post Share on other sites
ONURARD Posted March 30, 2023 Report Share Posted March 30, 2023 On 3/27/2023 at 1:12 AM, crash_rider said: 2 ONURARD You deleted system files, system file load error (6-7-8), restore files from copy! how ? where is the files ? because i didn't get a backup Quote Link to post Share on other sites
ONURARD Posted March 30, 2023 Report Share Posted March 30, 2023 On 3/27/2023 at 7:34 AM, hydyrov said: is there a video on how to do it? +1 Quote Link to post Share on other sites
crash_rider Posted April 6, 2023 Report Share Posted April 6, 2023 2 ONURARD Try firmware from other MRZ series... Go to the engineering menu and copy / paste the firmware files to the PRG0 folder. Video how to do it? hah...... Lots and lots of time in 010 editor and you'll make another language :) And all this with my own hands that's all Screenshots on dev https://www.youtube.com/@Prochivka_na_mafon/featured Quote Link to post Share on other sites
ONURARD Posted April 8, 2023 Report Share Posted April 8, 2023 On 4/6/2023 at 12:45 PM, crash_rider said: 2 ONURARD Try firmware from other MRZ series... Go to the engineering menu and copy / paste the firmware files to the PRG0 folder. Video how to do it? hah...... Lots and lots of time in 010 editor and you'll make another language :) And all this with my own hands that's all Screenshots on dev https://www.youtube.com/@Prochivka_na_mafon/featured i try mrz07 files but not working. now problem code 7 Quote Link to post Share on other sites
hydyrov Posted April 11, 2023 Report Share Posted April 11, 2023 On 4/6/2023 at 2:45 PM, crash_rider said: 2 ONURARD Try firmware from other MRZ series... Go to the engineering menu and copy / paste the firmware files to the PRG0 folder. Video how to do it? hah...... Lots and lots of time in 010 editor and you'll make another language :) And all this with my own hands that's all Screenshots on dev https://www.youtube.com/@Prochivka_na_mafon/featured Если решите когда нибудь поделиться файлами перевода то дайте знать) Quote Link to post Share on other sites
crash_rider Posted April 25, 2023 Report Share Posted April 25, 2023 I suspended this activity as it is futile! There are no people who want to change the language on their devices. Let them continue to travel with the Japanese language! Я приостановил эту деятельность так как это бесперспективно! Нет желающих переделать язык на своих аппаратах. Пусть и дальше ездят с японским языком! Quote Link to post Share on other sites
slavjn Posted April 25, 2023 Report Share Posted April 25, 2023 6 hours ago, crash_rider said: Я приостановил эту деятельность, так как это бесполезно! Нет желающих поменять язык на своих устройствах. Пусть и дальше путешествуют с японским языком! Я приостановил эту деятельность так как это бесперспективно! Нет желания переделывать язык на своих аппаратах. Пусть и дальше ездят с японским населением! 10000 тысяч за перевод ,тут вроде все бесплатно всем делятся у кого что получилось а ты хочешь разбогатеть ,цену хотя бы реальную просил. Quote Link to post Share on other sites
crash_rider Posted April 25, 2023 Report Share Posted April 25, 2023 софт, для перевода, я выложил! Удачи! Quote Link to post Share on other sites
slavjn Posted April 26, 2023 Report Share Posted April 26, 2023 17 hours ago, crash_rider said: Почитайте, что сделал я, и что тут сделали бесплатно! Бесплатно заменить японские фразы на английском! И....Все! И уверен , что я сделал! Одни шрифты только месяц делали! ШРИФТЫ! только! Картинки еще месяц! Перевод месяца! Поиск точек POI на русском, клавиатура на русском! Ну и во время всего этого , нужно было писать софт! который все это делает! НУ как вам такая работа? Вышло 4 месяца по 18ч работы в день! я должен бесплатно это отдать? Мне в магазине не дают бесплатно! и Вы, тоже думаю бесплатно - не работает! И сколько Вы, за 4 месяца зарабатываете? не 10 000р думаю! Еще радио сделал, и карту с двумя дорогами Владивостока! Но делать дальше не буду! Все, работы хватает другой... Катайтесь с кривым переводом на английский и картой Японии! :)))))) Тем более софт, для перевода, я выложил! Вы можете взять его и так же перевести и раздавать бесплатно! ОЙ! Гляди, как я разбогател! Завидуешь? :- П Удачи! Да не завидую я тебе ,понимаю что ты не один час сидел над переводом и другой работой, ну за 10 у тебя в очередь не выстроятся, дорого легче тогда купить на андроиде и не заморачиваться . Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.