bass_rock Posted March 27, 2016 Author Report Share Posted March 27, 2016 Yes, it can be done, but like the linked listing says at the bottom, Bluetooth doesn't work, which also makes Android Auto unusable. So the whole upgrade is a non-starter for now unfortunately. So yes. I actually think that the issue is not bluetooth but an audio volume level issue. It's possible the amp volume names changed not he hardware revision. Quote Link to post Share on other sites
big_lilo Posted March 27, 2016 Report Share Posted March 27, 2016 Guys, the AVICtoUSB and USBtoAVIC script .rar has a password :S Can anyone help me out??Thanks P.S Love this forum!!!! EDIT: Nevermind... found it in the spoiler thanks! Quote Link to post Share on other sites
bigdaddy496 Posted March 27, 2016 Report Share Posted March 27, 2016 nothing but failure to past errors when i tried to copy over the license and maps. did the script patch first, while its in progress the unit just reboots on its own. then in test mode i did the filemaintenance thing and tried to work with it but those failures wouldnt stop. this was very fustrating as it was not easy taking everything apart in the cramped area the head unit sits in anyone have a clue what i am doing wrong? Quote Link to post Share on other sites
bigdaddy496 Posted March 29, 2016 Report Share Posted March 29, 2016 ok, i tried it again and still getting the same errors. could it be because im trying to copy and paste a lot of files at once? is this supposed to be done one by one? i applied the script patch, or at least it seems it went through. while its installing, all of the sudden the unit reboots. theres no prompt that states the operation was completed or anything Quote Link to post Share on other sites
WhatIsWhatIsWhatIsWhat Posted March 29, 2016 Report Share Posted March 29, 2016 If somebody want to join pioneer-related google hangouts groupchat (~20 users now), just tell me your google account. Quote Link to post Share on other sites
bigdaddy496 Posted March 29, 2016 Report Share Posted March 29, 2016 do i need to have this naviextras-toolbox installed to change maps with the script Quote Link to post Share on other sites
GGin Posted March 29, 2016 Report Share Posted March 29, 2016 navi toolbox is necessary for you only for the first update after purchase and for to buy content. - use scripts to patch igo and for to change content on the pc Quote Link to post Share on other sites
mdpauley Posted March 29, 2016 Report Share Posted March 29, 2016 If somebody want to join pioneer-related google hangouts groupchat (~20 users now), just tell me your google account. Please include me if it's still going. My account name is mdpauley Quote Link to post Share on other sites
bigdaddy496 Posted March 31, 2016 Report Share Posted March 31, 2016 does anyone have any ideas of what is causing my error? its annoying did i miss a step? i downloaded the appropriate script, put t on a usb, forced install and selected copy script, the unit says in progress and then reboots. i then tried to copy ad paste maps, did not work, fail to paste error. help. Quote Link to post Share on other sites
chriSpe Posted March 31, 2016 Report Share Posted March 31, 2016 If the patch was successfully installed there should be an "library_before" and "library_after" file on the USB. To install the maps use AVICtoUSB and USBtoAVIC scripts pasted somewhere in the forum. Quote Link to post Share on other sites
bigdaddy496 Posted March 31, 2016 Report Share Posted March 31, 2016 How do you make scripts? Quote Link to post Share on other sites
XXcD Posted March 31, 2016 Report Share Posted March 31, 2016 Hello, i want to deactivate this annoying warning message at startup. I have the F70DAB and i saved the AVIC.img to my computer. When i mount the partition with system folder, i can't find a file named build.prop. Can anyone help to deactivate this message? Quote Link to post Share on other sites
ieastsidechevyrider Posted April 3, 2016 Report Share Posted April 3, 2016 I need help. Pioneer 8000nex 1.11 firmware North America 2015q3 maps installed. Everything works fine except the only poi displayed are gas stations. Restaurants and other pois that I select will no longer show on the map. Any idea on what it could be? Update:I contacted Pioneer for assistance with my problem and the rep that I spoke with also discovered the same problem with an 8000nex, and also with the new 8200nex. I also noticed the same with the avicsync phone app. He said that he will contact me when he finds out additional information. We will see. Quote Link to post Share on other sites
hi-phile Posted April 5, 2016 Report Share Posted April 5, 2016 Sorry for the newb question, but this might help others too. What options are needed to be selected when building the BSP file with Jenkins to be able to enable Test Mode, there seems to be several options and I'm not certain what to choose. Does it matter what NEX model unit you have, or not? Quote Link to post Share on other sites
onebyside Posted April 5, 2016 Report Share Posted April 5, 2016 You guys have to read, that means the entire thread.....I never knew how to do this other than simple copy/paste...I had to read all the info..all the mistakes and tidbits and pitfalls people went through. Most people wont hand feed when the info is in the thread...I had to read and now I have to find the info for YOU...cmon...STOP BEING LAZY. Everytime I check this thread someone wants a handout...read...then read it again..read other threads so you get the info..slang....lingo...technical terms people are using. The first spoiler has the file....pick the correct one for your application http://avic411.com/index.php?/topic/81468-the-avic-development-mod/?p=337784 Follow the instructs, that will patch the nav software open to accept the changes. NEVER ENTER COPY DEVICE MODE, YOU WILL BRICK YOUR DEVICE! Instruction to install patch Download file corresponding to your navigation version. You can check your version in About/Version information in maps application. Unpack/unrar downloaded file into FAT32-formatted USB stick, insert stick into USB1 (USB2 isn't working). POWER unit Your device will reboot into testmode. Select Write program forcedly => Copy Script, script will patch your system( IT wont say you correctly applied ANYTHING...it will simply reboot. Remove USB stick after script finishes. All that file does is get you into testmode, the script is a diff operation...you enable the script (4. Select Write program forcedly => Copy Script, script will patch your system and reboot.) which patch's the nav software. Loading Map files: I took the same USB with the same files on it and added the new map files in the matching folders....( YES you create the folders and sub folders)...that the files will go into on the unit( so I can remember where they go). http://www.gpspower.net/igo-tutorials/304319-where-put-igo-different-files.html I also created a folder called Backup on the usb So once again- insert stick into USB1 (USB2 isn't working). Your device will reboot into testmode. NOTICE.....your not applying any script or patch Using the built in file manager-> Linux Root-->extdata-->iGO...I copied the license and contents folders off my unit and pasted into my Backup folder on the usb.(patience this can take some time) You likely( I cant rem) wont get some pretty notice that everything copied.....make sure..dig around and check it out Once your sure they are backed up...go back into the license and contents folders on the unit and into the sub folders and delete the files your going to replace..FILES...NOT SUB FOLDERS Now you go to those exactly named folders and sub folders on the usb and copy/move the contents onto the unit in the coresponding correct folders and sub folders. Patience...wait for it to fin...might take 5 mins..maybe 20 mins Now if this is all to much for you...dont try it. NEX 8000 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.