MPTonyT

My S9+ will not do wireless AA. Wired works like a champ.

No problem. I try to help where I can as others do for us.

This .zip file has the modified Navi.exe with the OK nag removal and is ONLY for the 2015 update. The zip also includes testmode.key. Download the Zip here

Download the file pack for the newer ones, Click on this link LINK and download the old CARDINFO.cif file and replace the one in the original download with the one from the second download and you will be good to go. Just worked for a Z110 I bought on the cheap.

Just had a similar issue but i never got the Pioneer screen. Turns out it was my back lights for the screen.

Also I have found that if you are not using Pandora One (paid version) it will kick you out of App mode due to ads. I have experienced this with customers /friends radios.

I'm replacing my Z110 for a Z130 (addition of HD Radio) and im wondering if anyone know where the history information for the navigation is. I have looked through the File Management section of testmode but did not find anything that jumped out at me as that. Any help would be appreciated.

Volume Up: 16K Ohms Volume Down: 24K Ohms Mute: 3.5K Ohms Track Up: 8K Ohms Track Down: 11.25K Ohms Source: 1.2K Ohms Band: 62.75K Ohms The following buttons show this value between the sleeve and tip as well as the ring and the tip. Preset Up: 8K Ohms Preset Down: 11.25K Ohms Phone Menu: 2.10K Ohms Answer: 4.21K Ohms Hang up: 4.92K Ohms Voice: 42.4K Ohms

Also in the AV menu ensure that the mute is set for Guide and Tel and it is set to all or 10/20 if that's what you prefer.

....

Clarion preset on the TR7-Pro works like a champ.

I just sent one of my salesman out with two TR7-PRO's to test on a AVH-8400 tonight. He is going to let me know what works tomorrow morning. TR7 - Alpine = 4 second delay, on for one second, off for one second, back on until green wire looses +12V.

It says right in the document that the older ones in the black case won't. I didn't realize I was stating anything different. I was simply stating that the TR7 and the TR-7 are the same module. I mean physically the same hardware and harness. Always was always have been. Yes, OLD, OLD OLD ones may come with software that doesn't have the bonus features on it. I doubt anyone would come across one of those today though. A little background on me: Electrical Engineering Degree MECP Cert. Been with AAMP/PAC for 6+ years If anyone knows about the parts.... It's me. I apologize

Weird.... Go to their website http://www.pac-audio.com/productDetails.aspx?ProductId=717&CategoryID=31 Click on tech docs and click on the instructions..... It has the TR-7 instructions. coincidence? I think not. Yes, some of the very first revisions on the module didn't support the bonus features. Anything you buy or come across now will have it regardless of whether or not it has the - in the part number. Especially since that document has a date of 4-08-08. I mean I only work for PAC.... What would I know?

The TR7 and the TR-7 are the same module. Yes the housing have changed a bit but they are still and always have been the same module. Here is how to set it up with version 17. This is for a clarion radio so the timing may need to be changed. Clarion-Jensenl-Dual-Marine-Mode_ver2.pdf

I had this issue and here is what i did to fix it. It sounds 100% better and im not as "loud" on the other end as people were complaining that it sounded like i was yelling at them. I placed a ring of electrical tape around the vents on the side... (one loop worth) I placed a square of electrical tape over the face of the mic. (just big enough to cover the face of the mic) I places a Windscreen from radio shack over the tape that i applied on the face of the mic. I suggest people to try this. I drive a diesel truck and i thought my biggest hurdle would be engine noise. My cabin also

it says Z110BT on the face. Yes its installed. I've been a MECP certified installer for about 11 years. Plus an install in a F250 is cake. Deff has music sphere on the iPod screen. Thanks for the manual.

So i got my Z110 in the mail today. I tried to start to update it. I replace the necessary files and do the following.... Now Copy the folder c:updateAVICZ110 to the root of an SD card. Lets say your sd card is j: drive. You will now have one folder on the j: drive. j:AVICZ110 (Plus all the contents of the folder.) Now insert the SD to your Z110BT and it should start updating automatically. It does NOTHING.... Acts like i didn't even insert an SD card into it. So i get to looking and under my service Information Screen it says.... Version: 02.0000 And under the BT f

Mine does this as well. But only when i voice call a favorite. I don't have a remote so its when i use the VR button.

turned out it was my phone.. hers transfered first shot.

Let me first start by saying I'm no stranger to pioneer and their bluetooth. But in this instance I'm at a loss. I try to transfer my phone book to her unit and it wont let me. I press the phone book transfer button and it switches to that screen At the top it has "Menu/Phone book Transfer" according to the manual I'm supposed to press the "START" button but there isn't one. I have already registered the phone with the unit and i had no issues transferring my contacts to my Avic-Z3. The Bluetooth disconnects like its supposed to but when i try to transfer a contact its like it

if you use the peripheral GMAHL1 it will come with the connector and RCA to retain the reverse camera.

That is correct.

Smart Car: Speed Sense PURPLE (AC) ECU MODULE TO THE RIGHT OF GLOVE BOX PIN 14 OF A 26 PIN PLUG Nissan Maxima: Speed Sense BROWN (AC) IN INSTRUMENT PANEL HARNESS Dodge Charger: Use Peripheral CHYAH0 module. VSS is can-bus Nissan Titan: Speed Sense WHITE/RED (AC) IN HARNESS TO GAUGES Audi A3: Speed Sense BROWN (AC) AT ABS MODULE ON LOWER SIDE OF RIGHT FRONT STRUT TOWER (THIS WIRE IS TWISTED WITH A BLACK WIRE IN THE HARNESS)

We will need to know what vehicle this is in. If its a newer vehicle are you using an integration module? anything else installed in the vehicle?