chris0055

Right, sounds good.

Hi I have X910 and hooked up with Ipod classic (very 1st generation). I can watch videos on ipod without a problem, but I can not forward it. When ever I touch the screen while video is playing, it pops up this ipod control like menu and there is a "STOP" menu on the left. I tried to skip this video to next, it'll just keep looping the current video. Anyone has any idea what happen? I didn't set is as repeat 1. When I first installed it, there's no problem like this.

So you got bypass done right?

Just received mine, and it works very well. Thanks.

I wonder if the emulator still works. Please let me know if you figure out how to make it work. I tried it, but always fail.

ok, if I understand you correctly, you tried to edit the pioneer.ini file for software bypass? If this is the case, then you need 1. A formatted SD card with test mode directory/folder and nothing else. 2. Insert your card and boot your X910/X710 3. Once you get in WinCE mode, try to recalibrate by going to My device -> Control panl -> Stylus ->Calibration and follow the instruction to recalibrate (very important since u can easily mess up with this small screen unit. 4. Once its done, close the window and go to [My Flash Disk] 5. and go to APL2 6. and go to iGo, and you

What are you trying to do again?

There are several ways you can do to connect two wires. For speaker wires, I solder them and heat sink. To connect the mute to ground, I uses this wire clips. You can find about 3 of them comes with the unit as well. Just show that to electronic store and they'll get you a bunch. You can use butt connectors or caps too.

When I was waiting for my unit, I had the same concern as well. It indeed is much easier than one can expect once you have all the hardware you need. http://www.avic411.com/forum/viewtopic.php?t=17013 Just follow it and you'll have your unit hardware bypassed. Trust me, its easier than you expect. However, I would suggest you ground the wire to your "ground" wire instead of the "metal part of the car body" so it'll have a common ground.

Thanks for the info. I have tried to make some minor modes so far including: adding route cancellation button on the compass, a navigation mute button, speed limit/current speed/elevation, and the foreign language font. I have a complete backup file for the unit. I like to do the Diaftia's mod but whenever I start reading the change log. I just easily get lost. I also like to start making some mod myself or incorporate other's mode but not the complete modifications. Ie, I like to add a "OFF" button on the map so I can turn the AV source OFF ( same as if you go AV source -> OFF at b

I'm on the same boat too. I like to do some mods but don't know where to start.

Great mod on my X910. Thanks a lot!!

Great mod!! I always have hard time finding a way to stop the navigation, and this mod make my unit more user friendly.

Great mod! This is my 2nd mod and it works great!!

Hi Thomas, I just made a payment to your account. $32 in total as I located in Canada. I believe $10 is extra as you specified in thread in the F Series forum. Hope I can get it soon.

Try Megauploads?

Sounds good!!! You may now start personalizing your unit!

Does this include asian fonts?

Hey guys! This link: http://www.phm.lu/downloads/download.aspx?{940B734A-C437-41C7-ADED-2A4418802FD3} doesn't work anymore and I'm desperately want to install Asian font in my X910, does any of you still have the file? or can anyone tell me where to find the file?

As you can read from my previous post and seems like I found myself a way to display Asian characters in my X910BT Here's how: 1. Unit: X910BT 2. Software: 3.0 (never update since I bought it in March from Amazon] 3. SD card: Kingston SDHC 4 GB I use the file from this post: viewtopic.php?f=34&t=19394 1. Download this .cab file from http://rapidshare.com/files/92952493/D_ ... t.cab.html According to the post, its a Google DroidSansFallback.ttf font from Google Phone. It supports and is limited to Traditional Chinese, Simplified Chinese, Japanese, and Korean. 2. Put th

Is there a way to change the default zoom while keep the smart zoom function? I think the smart zoom helps you to zoom in when the car slows down to intersections and zoom out when one is driving a long straight road.

I have 3.0 All I do is download the 2.3 Testmode and it'll extract to only 1 Testmode folder. Then put in the root of SDHC card (mine is kingstone 4gb sdhc), and boot my HU with it, then it works. If you used the "read before post" Testmode, it'll extract 2 folders 1. Testmode 2. MULT...something It wont' work.

Model: X910BT Software Version: 3.0 SD card: Kingston SDHC card 4gb Here's what I did: 1. Download the Branding.zip file in the root of my SD card. 2. A 2.3 Testmode folder in the root of my SD card. 3. Put the card in and boot into CEmode. 4. Copy the Branding.zip file into myflash/apl2/iGo 5. WinCE prompt a message ask me if I want to replace/override 6. Yes, and it spent less than 1 minute to copy. 7. Close the window and turn off the unit by turn off the car ignition(ACC) 8. Restart the unit without any SD card insert 9. Go to Map Visual Setting POI 10. In fast food section

I indeed find myself the answer. SD card: Kingston 4gb SDHC Software: TestMode 2.3 <---extract to only 1 Testmode folder I can now access to WINCE mode and made myself a copy of origional file.

Indeed, I found myself the answer. For X910BT, I just need the 2.3 Test Mode and it extract to only 1 testmode folder to access to WinCE mode.