wabadie

May be this will help http://www.coastaletech.com/gen6lockpick.htm

reset the speed pulse

First use the SD1 to update the bluetooth by manually going to the bluetooth settings to 3.10 then insert the SD2 to update the bluetooth to 3.22.

check the bypass according to the exact unit

Do you have the unit bypassed?

yes. When your idevices within the range just open the itunes and make sure wifi sync is enable.

yes. It is 5.0.1 and the ios 5.0 only works if the idevices plugged into the power source but the ios 5.0.1 doesn't need to be plugged into the power source.

I agree with that works only on ios 5.0.1

you need to upgrade it to z130 to use the new tuner

update the bluetooth ver 3.10 from sd1 then put the sd2 and do the bluetooth ver 3.22

Relay either I mean it's for the HID's or for the fog lights. Usually when you have a foglights switched on then if you flash it to the high beam foglights switch off by itself that means you have a relay on the foglights. Also some HID's have a direct connection which is plug n play but some of them connects through the relay.

Mostly it will interfere with the relay. I also have a Honda Accord with HIDs and Z110-120-130bt but I don't have a relay. So I never got that problem. Sometimes it's also interfere with the foglights

Do you have a HID's installed on your car? If you do yes some HID's does interfere with the HU

Yes I did works very good

Check the input and output on the bus cable,make sure it's black to black and blue to blue. I hope this will helps

Well first of all you need to have iphone 2g which is the very first iphone. goto the at&t store with that tell them that you lost your new iphone4 or 3gs and tell them that you going to use this phone for time being then use it for a day or two and go back to the at&t store tell them that you got your phone back and need to transfer it back then they do it for you.the secret is iphone 2g takes only unlimited data plan and it doesn't take the 2gig limited plan so your plan become unlimited hope it helps everyone because I did it on mine.

If you are a AT&T customer there is a way to change your plan to unlimited

Well I had a same problem. I restored it and I tried it without the jailbreak and it was working. What I think is the any 3gs with newer bootrom and iphone 4 having this problem I think.

Either turn of the widescreen or try the 4:3

Yeah I left in on U S english because TTS sounds shitty. Anyway I mssed my Z3,the reason I sold it because of iphone connectivity. Thanks Anyways.

Well I have the same problem with my z2 upgraded to z3 with 80gb hard drive.I got this unit because of my friend recommend it but to me it's a piece of junk I drive everyday with that unit but still give me different route.Now I really don't know what to do.Also that doesn't use carpool lanes.

Just do the level 4 reset and that will do the trick.

Well unhook the vss wire and do the level 4 reset that should fix the problem cause I had the same problem with the z2 now it's working very good.

Hey Guys,I have AVIC Z2. I just need to know how to find a vss wire on 2000 Honda Accord EX V6.

Finally I did the factory default voila everything back to normal.Thanks a lot you guys are the best.Thanks again.