LOOSEWHEEL

Cut paste the web link into Google. When the search responds back, click 'translate'

^^^^What he said ^^^^^....plus what I said 3 posts above that.

Good stuff. Tried to find some icons for you but no luck. Keep at it. A lot of us are excited to see the finished product.................no pressure

Everything you need is in this thread...>>>>>LINK<<<<. And I mean everything. Even when it doesn't work for you the 1st time, the solution will be in that thread.

Why don't you try the FX3.1 upgrade. If your firmware is corrupt, this may fix it.

http://thepiratebay.org/torrent/5546342

4 ohm for front and rear only. 2 ohm permissible on the sub channel.

The 'resistor' fuse is simply a fuse that looks like a resistor. The color bands translate to the fuse value. These are also referred to as a 'pico' fuse. You can simply measure them to ensure they are a short to verify they are good. Last step would be to see if your getting the 12V at the harness connector that plugs into the HU. Verify no broken/bent pins in the connector at the harness and HU.

I presume you are mixed up when you say you are measuring current. Just want to clarify that your DMM is set to read volts and not amps? Touching the resistor fuse with the meter set to volts will not damage it. Here is what to do. 1.Place car in reverse. 2.Place ground (black) lead to the same ground as your HU 3.Place positive (red) lead at the end of the resistor fuse that is attached to your reverse signal source. Should read ~12v 4.Place positive (red) lead at the end of the resistor fuse that is attached to your HU. Should read ~12V 5.Place positive (red) lead at the con

Looking real good. Keep up the good work!

Try the FX3.1 update. You have nothing to lose.

Try the FX3.1 update again. Reread the thread to see the problems people have had. I found most would post a problem, then a couple posts later they resolved it as they did not follow instructions in the 1st place. Download the file again and follow instructions VERY carefully.

Did you copy the 'CONTENTS' of MyFlash drive over rather than copying the MyFlash drive folder?? Or just do the FX3.1 upgrade.

Fuses and resistors are bi-directional. It doesn't matter which way they go in.

I am seeding it..............................

Is this what your looking for? FX3.1rar

Is camera set to 'on' in system settings??

Glad you got it working.

Forget 2.008. Jump to 3.0201. Follow the instructions in this LINK and don't look back. It will cure your reboot issues and give you a whole new unit.

Reseeding for you now.

Have you tried the FX3.1 upgrade?

This is the latest and greatest. You will not see a 4.0 upgrade to the F series as it is discontinued and has reached it's end of life for Pioneer. You will love the 3.1 upgrade.

Google "teleatlas maps torrent". You should find it.

Just follow this procedure LINK . Works perfect and will give you maps from mid 2009. After you get the unit working, find and load the TA 2010 Q2 maps. But 1st things 1st.........

Just reflash with this LINK. It has the US maps but you can delete them and put the EU ones in after you get it working.