Retell Posted July 18, 2009 Report Share Posted July 18, 2009 ONLY DOWNLOAD FILES IF YOU OWN THE RIGHTS TO USE 3.0 Retell nor Avic411 Condones Piracy. Please note this is not the official Retail Pioneer 3.0 Update! If you break your unit, Pioneer will NOT fix it for free! You can purchase the official 3.0 Update SD Card from Pioneer's website. Step 1: Download 3.0 from the torrent. http://itchybot.com/x910bt.zip.torrent Step 2: Download the install files.http://itchybot.com/3.0%20Install%20Files.zip Step 3: Copy the 2 WinCEIMG files to an empty SD card. Step 4: Turn unit on. When the pioneer logo comes up, press and hold the menu, map, eject and the reset button at the same time. When you hear a pop sound from your speakers, let go of the eject button but continue to hold menu and map buttons. This will bring you to a blue screen where you will have to enter the service combination. Press the volume knob in this sequence and you will see * signs for each push: Up, Up, Down, Menu, Left, Right. Step 4: Put in your SD card with the WinCEIMG files. Step 5: Select Update CE Step 6: Select Update SD Format Step 7: Wait till it says restart in the bottom center. Step 8: Remove your SD from the AVIC, put it in your computer. Step 9: Delete all of the files off the SD card and put the testmode folder, DATA file, and the flash dump from torrent on. Step 10: Insert the SD card into the AVIC and hit the reset button. Step 11: Once testmode boots, open explorer and copy the contents of the flash dump to the "My Flash Disk" Drive. (Should take about 20min even though at first it says like 140min) Step 12: Copy the Data file from the SD card and replace the one in "My Flash Disk\APL2\iGo" (Soft Bypass) Step 13: Press and hold restart and eject for 5 seconds. Step 14: Enjoy your new 3.0 I will add later how to update to the new 3.0.1 Quote Link to post Share on other sites
zbornacsvt Posted July 18, 2009 Report Share Posted July 18, 2009 Just what I was looking for! Thanks! Quote Link to post Share on other sites
touche6784 Posted July 18, 2009 Report Share Posted July 18, 2009 perfect. I was wandering back and forth between different posts to figure this out. Wish others on the forum were as considerate as you to consolidate information like this and share it. Quote Link to post Share on other sites
stan-the-man Posted July 18, 2009 Report Share Posted July 18, 2009 Is that for all units or only EU or US? Quote Link to post Share on other sites
Esilar Posted July 18, 2009 Report Share Posted July 18, 2009 Is that for all units or only EU or US? The torrent is for US+Canada. Quote Link to post Share on other sites
zbornacsvt Posted July 18, 2009 Report Share Posted July 18, 2009 I am getting about 175kB/s. Should have this downloaded in about 2 hours! Quote Link to post Share on other sites
Bigroot Posted July 18, 2009 Report Share Posted July 18, 2009 Thanks for taking the time to post these instructions Retell!!! Quote Link to post Share on other sites
mythek88 Posted July 18, 2009 Report Share Posted July 18, 2009 does this have all the changes that the official 3.0 update for F series has?? if so....WOW thanks a bunch!! Quote Link to post Share on other sites
stan-the-man Posted July 18, 2009 Report Share Posted July 18, 2009 Cheers, its all good for me so Quote Link to post Share on other sites
eXtReMeP4in Posted July 18, 2009 Report Share Posted July 18, 2009 http://itchybot.com/3.0 doesn't seem to work for me. When I click on the link it says 404 not found. Quote Link to post Share on other sites
vwboy308 Posted July 18, 2009 Report Share Posted July 18, 2009 I am getting the same too. Quote Link to post Share on other sites
Cozmo85 Posted July 18, 2009 Report Share Posted July 18, 2009 on step 2, you have to let go of reset first, and then you will hear the pop. then release eject. otherwise you only get 10 seconds in the service menu before it powers off. Quote Link to post Share on other sites
bloodninja Posted July 18, 2009 Report Share Posted July 18, 2009 Try this link, since you guys apparently don't know html formatting.. http://itchybot.com/3.0%20Install%20Files.zip I'm just putting that there. I do not condone, and have no intention of downloading said file. I bought the update a couple weeks ago. Just throwing that out there to cover my own ass. Quote Link to post Share on other sites
parisioa Posted July 18, 2009 Report Share Posted July 18, 2009 thank you for this. does it include the map updates? p.s. i'm seeding at between 10 & 20mbit, depending on whether or not my laptop & desktop are on. (each has their own cable modem) Quote Link to post Share on other sites
pwnin o'brien Posted July 18, 2009 Report Share Posted July 18, 2009 HELP!!! When I get into the service menu, my screen will go black after 20 or so seconds. Even once I get to Update via SD (Format) and I click it, it will start reading the files and then the unit will just go black. This happens every time, even if I go into the service menu but don't click anything. When I reboot the unit (without trying to get into the service menu), the screen just stays black, nothing comes up. I have 2.006 installed on my F900. Once I reboot the unit I can successfully get back into the service menu, but then it goes to black screen. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.