pwnin o'brien Posted July 27, 2009 Report Share Posted July 27, 2009 Question... I want to hide the AV title bar (song title bar) at the bottom of the map screen at all times but keep the street name bar. Where can I find the code for the AV title bar? What is the script/layer name for the AV title bar? Thanks! Have you tried clicking on the little arrow at the end of it? Or reading the owner's manual where it mentions it? No, I don't want to temporarily hide it. When you press the arrow, that only hides the bar until the next power cycle. The next time the unit turns on, the bar is right back where I don't want it. I am looking to remove the bar completely (like when the audio is OFF) and permanently. Quote Link to post Share on other sites
pwnin o'brien Posted July 28, 2009 Report Share Posted July 28, 2009 Would it be possible to increase the Z value of the street name label/background so that it covers the AV title bar but not the AV input and album cover art? Maybe if I increase the road name background and icon to a much higher Z? Also increase the fonts Z so it is higher than the background? ;route name and housenumber(next and the third road name) I'll do some experimenting and report my findings. Quote Link to post Share on other sites
pwnin o'brien Posted July 28, 2009 Report Share Posted July 28, 2009 It was a no go. Even with z=4000. Quote Link to post Share on other sites
ill.die.trying Posted July 28, 2009 Report Share Posted July 28, 2009 i think this would be handled in clip planes as that's what controls it in 8.0 Quote Link to post Share on other sites
BorisM Posted July 28, 2009 Report Share Posted July 28, 2009 i think this would be handled in clip planes as that's what controls it in 8.0 Very much doubt it. Song title is not output by iGO, it is overlayed by system software on top of anything iGO outputs, so I do not think it can be hacked by anything internal to the Navi part of the unit... Quote Link to post Share on other sites
ill.die.trying Posted July 28, 2009 Report Share Posted July 28, 2009 i think this would be handled in clip planes as that's what controls it in 8.0 Very much doubt it. Song title is not output by iGO, it is overlayed by system software on top of anything iGO outputs, so I do not think it can be hacked by anything internal to the Navi part of the unit... ooohhh, AV input, i thought it was regarding the street names in 3d, hehehe, too much reading of bits and pieces got me confused, Quote Link to post Share on other sites
pete3025 Posted July 28, 2009 Report Share Posted July 28, 2009 I have a question... Which line in the sys text do I need to edit to see more of the background? I put a modded sys text in, but alot of the sky mod is cut off. I would like to get it to tilt more foward, I have the max tilt level set at 10000 right now. Quote Link to post Share on other sites
nissanfrontier Posted July 29, 2009 Report Share Posted July 29, 2009 I have a question... Which line in the sys text do I need to edit to see more of the background? I put a modded sys text in, but alot of the sky mod is cut off. I would like to get it to tilt more foward, I have the max tilt level set at 10000 right now. here is my sys.txt Also for the modders, I still can't figure out the sun thing. I have the moon on there at all times. I still think there is some code missing to get it to show. Anyone else see the sun? It isn't a big deal, but just bothersome when something doesn't work right sys.txt Quote Link to post Share on other sites
pete3025 Posted July 29, 2009 Report Share Posted July 29, 2009 Thanx Nissan, Also I am using one of the sun bmp's that is in Euro's sky mod. I thought it was not working until I went for a drive then it showed up. It actually moves with the rest of the bmp while driving. Quote Link to post Share on other sites
nissanfrontier Posted July 29, 2009 Report Share Posted July 29, 2009 Thanks, yeah, my moon moves all around as I make turns, but it never leaves the screen. In fact, even on the pictures on the first page of euros, the moon is there, the sun isn't. I even changed my sun picture to the one that is brightest, and I also turned on the day view at night to get a better look without the real sun glaring off the deck, and I still dont' see anything. Quote Link to post Share on other sites
peterparker Posted July 29, 2009 Report Share Posted July 29, 2009 is it possible to take phone(bluetooth) status info and place it into the nav screen? i.e signal/battery/carrier... Quote Link to post Share on other sites
eurotuner29 Posted July 29, 2009 Report Share Posted July 29, 2009 Thanks, yeah, my moon moves all around as I make turns, but it never leaves the screen. In fact, even on the pictures on the first page of euros, the moon is there, the sun isn't. I even changed my sun picture to the one that is brightest, and I also turned on the day view at night to get a better look without the real sun glaring off the deck, and I still dont' see anything. Ya i'm not really sure what the bmp's for the sun really do. It's my impression that whatever the bmp picture has in it is what will show. Thats why the moon shows and just rotates directions. Quote Link to post Share on other sites
nissanfrontier Posted August 10, 2009 Report Share Posted August 10, 2009 I have a question... Which line in the sys text do I need to edit to see more of the background? I put a modded sys text in, but alot of the sky mod is cut off. I would like to get it to tilt more foward, I have the max tilt level set at 10000 right now. here is my sys.txt Also for the modders, I still can't figure out the sun thing. I have the moon on there at all times. I still think there is some code missing to get it to show. Anyone else see the sun? It isn't a big deal, but just bothersome when something doesn't work right Well, I saw the sun on my GPS for the first time today, for about 1 second. So I know it is there. Funny too though, I had two moons when I switched over to night. One was a low full moon that appeared as the sun did, quickly and shortly, and that same time, the moon that si always present (quarter moon high in the sky) was there too. Any ideas on how this may be the case? Running IDT data and pioneer blue day and night Quote Link to post Share on other sites
MilesA Posted August 18, 2009 Report Share Posted August 18, 2009 That's annoying. I'll see if I can disassemble some of the .exe's and comb through some assembly code and see if I can find anything useful. Does anybody know where I can obtain a copy of IDA Pro 5.5? The 5.4 demo is extremely annoying and the 4.9 free version can't disassemble the ARM executables/DLL's (PM me). Also, what's the easiest way to make my map icons (2D/3D/NorthUp and the other button under that one) semi-transparent (about 50% transparent)? Can I just change the alpha levels in navigatemap_800_480.ui? For the map icons that's exactly what you do but in navigatemap.ui eurotuner29 - I'm trying to figure out how to make the buttons on the navigatemap_800_480.ui switch between opaque and semi-transparent. I came accross a mod for version 2.0 that did this (I think it was another users twist on Stanislavovich's mod). i.e. the buttons are semi-transparent until you touch the screen and then they turn opaque for 5 seconds or so. Is this what you were making reference to in the above post? I came across Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.