diaftia Posted January 21, 2011 Author Report Share Posted January 21, 2011 That is correct, you need 7zip! I personally have an Image.res of 3.5 MB, no problem at all since one year in FW 3.x. I found on my 900 that if I have problems with the touch screen accuracy in testmode I go to control panel in winCE and recalibrate the screen. I think it is under stylus in the control panel from memory. Thanks for the backup guys. Quote Link to post Share on other sites
diaftia Posted January 21, 2011 Author Report Share Posted January 21, 2011 Same here and I'm also in UK in case EU is the issue. Also when I select Tom-tom colour scheme (I didn't add it so must be standard) Navi locks up? It really sounds like the incorrect entry in sys.txt (for both you and ovalball). Take the file onto your computer. Its in /My flash disk\apl2\igo. Open it with notepad and edit the following line: default_language="english UK" ;(EU) F500, F700, F900, F90 to be: default_language="english GB" ;(EU) F500, F700, F900, F90 Then copy it back. Either that or you can wait for me to release an update with the correction in it. Quote Link to post Share on other sites
RS1800 Posted January 21, 2011 Report Share Posted January 21, 2011 One more question, I note many people refer to TMC but I've never had that. Can I get it in the UK and is it any good? I have turned on in the menu but it says TMC hardware not found? can you advise, cheers Quote Link to post Share on other sites
diaftia Posted January 22, 2011 Author Report Share Posted January 22, 2011 can you advise, cheers Are you currently notified of traffic alerts? Quote Link to post Share on other sites
Chuck88 Posted January 22, 2011 Report Share Posted January 22, 2011 Thanks for the backup guys. Just for the good of everyone Quote Link to post Share on other sites
avic_weo Posted January 22, 2011 Report Share Posted January 22, 2011 You are having really odd issues. Are you sure you cleared your save files out when you updated? Well, yes. I used your installer, although I left out the US map update (am afraid this is not much use in Belgium) Anyway, I promised you a video, so here it is. Only thing is: I shot it with my cell phone, and I managed to hold it upside down :$. Mind you: this is a freeway intersection, so I am using both of my hands a lot of the time Weo VIDEO0005.wmv Quote Link to post Share on other sites
gehklaus Posted January 22, 2011 Report Share Posted January 22, 2011 Hi, today I tested the speedo screen. The speed was going small, but I got only a blank white screen where the map should be. Quote Link to post Share on other sites
RS1800 Posted January 23, 2011 Report Share Posted January 23, 2011 Are you currently notified of traffic alerts? I don't think so. What do they look or sound like? Quote Link to post Share on other sites
diaftia Posted January 23, 2011 Author Report Share Posted January 23, 2011 Well, yes. I used your installer, although I left out the US map update (am afraid this is not much use in Belgium) Anyway, I promised you a video, so here it is. Only thing is: I shot it with my cell phone, and I managed to hold it upside down :$. Mind you: this is a freeway intersection, so I am using both of my hands a lot of the time Weo That is odd. So I notice the signs are set large. When they are normal and they turn green do they get large or stay small? Quote Link to post Share on other sites
diaftia Posted January 23, 2011 Author Report Share Posted January 23, 2011 Hi, today I tested the speedo screen. The speed was going small, but I got only a blank white screen where the map should be. I don't even know where to start on this. A white background would have to be made as the map is there by default if the black background isn't used.. Is there anything else you can give me? Have you made any changes to anything at all? Is anyone else experiencing this? Quote Link to post Share on other sites
diaftia Posted January 23, 2011 Author Report Share Posted January 23, 2011 I don't think so. What do they look or sound like? I am not sure. I am in the US and we don't have TMC. Sit tight for my next release and see if they start working. Quote Link to post Share on other sites
gehklaus Posted January 23, 2011 Report Share Posted January 23, 2011 I have change two pictures in the Data.zip (from red to green) and use my own Image.Res No other change. Quote Link to post Share on other sites
diaftia Posted January 23, 2011 Author Report Share Posted January 23, 2011 I have change two pictures in the Data.zip (from red to green) and use my own Image.Res No other change. Ah. That's why. Would the two red images be the speedo backgrounds? Quote Link to post Share on other sites
gehklaus Posted January 23, 2011 Report Share Posted January 23, 2011 Yes thats the speedo background I will copy your Data.zip back. But what can I do? The red doesn`t fit to all the green light in the car. Quote Link to post Share on other sites
diaftia Posted January 23, 2011 Author Report Share Posted January 23, 2011 Yes thats the speedo background I will copy your Data.zip back. But what can I do? The red doesn`t fit to all the green light in the car. The speedo background is made up of two images now. If you have Photoshop or another photo editing program just turn those images green. Either that or you are going to have to make your images the exact same size as those two. I think the reason you are showing white is because the top/bottom image is transparent in the center. You need to make sure yours is too. Make sure you keep the alpha layer in the center. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.