stoli72 Posted August 21, 2007 Report Share Posted August 21, 2007 Perhaps someone can email it? Quote Link to post Share on other sites
Hyperite Posted August 22, 2007 Author Report Share Posted August 22, 2007 Perhaps someone can email it? Why, what's the issue? Quote Link to post Share on other sites
CasperRR Posted August 23, 2007 Report Share Posted August 23, 2007 so to do method 2 do i still need the 2wire? Quote Link to post Share on other sites
sorbid Posted August 23, 2007 Report Share Posted August 23, 2007 Does anyone know what else was updated from Pioneer other than the ability to bypass? Just curious if there's release info somewhere. Â Thanks! Quote Link to post Share on other sites
Hyperite Posted August 23, 2007 Author Report Share Posted August 23, 2007 so to do method 2 do i still need the 2wire? Did you read ANY part of this thread? Quote Link to post Share on other sites
blicious Posted August 25, 2007 Report Share Posted August 25, 2007 I am a current owner of a Z2....was installed at Sound ADvice. Installer did the wire bypass I have read ALL 23 pages of the forum and still can't get this done. I am using NERO...but not sure if it was burned as an image or data? When I put a new CD-R disk in: Data already updated icon comes up? DVD player works for a minute then goes away. If it was burned as DATA...would this be the problem? Or did the installer not do the ground properly? I don't know if it is data or image? Â I am not retarded.....just not computer savey. Â I will gladly donate FO-sure....just want to get it done...it would be the least I could do. Â HELP! Quote Link to post Share on other sites
ducatiboy Posted August 25, 2007 Report Share Posted August 25, 2007 I am a current owner of a Z2....was installed at Sound ADvice.Installer did the wire bypass I have read ALL 23 pages of the forum and still can't get this done. I am using NERO...but not sure if it was burned as an image or data? When I put a new CD-R disk in: Data already updated icon comes up? Â When that "new compilation" window comes up with the list of disk types on the left (vertically arranged icons) hit CANCEL. Then click on the menu RECORDER and then BURN IMAGE and select the image file (ISO) and it will burn the disk for you. Â When you insert the disk and hit MAP on the Z2, it should come up with a "do you want to install this?" screen and you have to hit YES. If this doesn't happen something is wrong with your disk. Â You can check the disk(s) you made so far, by putting them in the PC, on the disk does it have the NAME OF THE FILE.ISO on it? (I can't remember the actual name of the file).... OR does it have a bunch of files whose names you have never seen before. If it's an ISO file on the CD, that was wrong (and you won't get that with RECORDER - BURN IMAGE) if it's a bunch of weird files, that's a correctly burned disk. Â Be sure to select to burn the disk at a SLOW speed. The slower the better I would say. I have talked to a couple people who were getting lots of "retry" errors while updating and burning a disk at a slower speed helped. Â Â Then if you are still getting the parking brake warning when you turn the car on, reset the unit with the small recessed button to the right of the eject button on the bottom left of the Z2. Quote Link to post Share on other sites
sorbid Posted August 25, 2007 Report Share Posted August 25, 2007 Maybe someone can help me here. Â I've read the whole forum, two or three times. I burned the image to the CD, inserted CD, ran the update, hit RETRY 44 times and finally worked. After 100% it rebooted, installed the files, I hit OK at the time/date default screen. Now I'm thinking good to go. SO, I hit the RESET button, and it rebooted. However, the system hung at the splash screen. So I hit reset again. Now it just hangs at the begging where it says "Starting Pioneer Car Navagation System..." Â I haven't done the two wire bypass yet. Do I have to do the two wire bypass before I can get the system to boot back up again? Â Any help would be appreciated. Â Thanks! Quote Link to post Share on other sites
ducatiboy Posted August 25, 2007 Report Share Posted August 25, 2007 I haven't done the two wire bypass yet. Do I have to do the two wire bypass before I can get the system to boot back up again? Any help would be appreciated.  Thanks!  No, you don't need to do that to get it to boot up. Something is weird. Usually that symptom is a problem with files on the hard drive. Maybe do a level 2 - 4 reset. But it's not cause you didn't ground the 2 wires. Quote Link to post Share on other sites
sorbid Posted August 26, 2007 Report Share Posted August 26, 2007 Ok I left the Z2 alone for a while so myself and the Z2 could cool off! Â It booted up and hung again at the text screen. I hit RESET and finally booted up! Was really worried I was going to be the unlucky one! Â I will be doing the bypass soon. Should be cake now. Â Thanks! Quote Link to post Share on other sites
blicious Posted August 26, 2007 Report Share Posted August 26, 2007 first of all...thanks for tips....  I made sure the disc was burned as an "IMAGE"  when I press map......the map screen comes up....then system says  "Already Updated"  I press reset.  DVD/Functionality goes in and out. Will not stay working  Do I continue to keep pressing RESET?  OR......did my Sound Advice Installer not due a proper Two-Wire by pass?  I am close to going crazy....and am getting really good at throwing CD-R disc down my driveway  Help? Quote Link to post Share on other sites
rmedrano1116 Posted August 26, 2007 Report Share Posted August 26, 2007 when trying to bypass my z2 headunit the only light green wire i noticed was cut... can anyone help?? i already was able to ground wire number two its just the parking brake i have issues with. Quote Link to post Share on other sites
whtcrxghst Posted August 26, 2007 Report Share Posted August 26, 2007 Ground that light green wire Quote Link to post Share on other sites
rmedrano1116 Posted August 26, 2007 Report Share Posted August 26, 2007 the light green wire is grounded already but the end is cut. Do i ground that end thats cut??? if so to where? im really confused is there any way anyone can help on how exactly to ground this wire with pictures because its grounded to connection #1 but its cut at the end so idk what to do at all!!!!!!!! Quote Link to post Share on other sites
rmedrano1116 Posted August 26, 2007 Report Share Posted August 26, 2007 looking at the wire this what i'm seeing one end is grounded but the other end seems to be cut?? along with a bunch of other colored wires?? is that how its supposed ot be?? am i supposed to ground the cut end to something?? if so what?? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.