dashtwo

Can the HDMI input only be used for iphone and android phones? From reading the manual, it doesn't look like you can use it as regular HDMI input for say a video camera or blue ray player. is this correct?

I updated my f700 to 4 hybrid a couple months ago using eknkrypt3d's 4.01 zip and some newer maps. Everything seemed to be great until I went on a trip for thanksgiving and I noticed two things I hadn't tried since the update. 1. If I hit the "video" tab with the Ipod attached, I get a reboot every time. would really like to be able to play ipod video again. 2. Voice control of the ipod no longer works. I have updated the vr catalog and still doesn't work like before the update. anyone else getting this? any help would be appreciated.

Been a long time. My 700 is still running great with x3. Started poking around here again and thinking of putting the above mentioned 4.01 on. For whatever reason, I have not been able to successfully dl the map file that SuperH mentions. My question: Since encrypt3d's package includes the maps but not the pois that I need (living in the midwest), can I just use the pois I currently have with the new 4.01 maps? I don't use them a lot so my old ones would be fine if they will work but it would suck to have none. Thanks

i do have a couple downloaded. i looked through some of the code but it has been quite a while since i messed with this. I had one at one time that had mod descriptions commented out in the code (which was very helpful) but I cant remember whose data.zip it was. anyway i just want to do the linear compass and not all of the rest. (just add it to my nav mute button which works great). i'll keep looking.

if you ground the parking brake wire and dont plan on moving u r good. i believe the problem arises when the unit realizes that the wire is grounded (parking brake on) and the unit is moving (faster than 10 mph i think). So u need to ground the right pin to bypass this problem. the mute wire is used because most ppl dont use it for anything else. it really has nothing to do with mute. or instead of grounding the bypass pin, you can mod the unit to not have a problem until you are doing 256 with the parking brake on. but that is the software bypass anyone please correct me if i am wrong on th

Can someone point me in the right direction? (funny, I know) I wanted to change the map compass to the linear compass on f700 with 3.0. I have searched and read but there are so many different things to so with the compass. I am not looking to make it a button or anything. just switch the dial compass to the cool linear one. I have had success adding a working mute button to the map screen so i can do the basics, i just need some guidance as to only changing the compass. thank you.

thanks to all of the great contributions to this forum, i have been running 3.0 (x series image) on my f700 with the nav voice mute button. I accomplished this without problems and all has been running smoothly. Now that the official update is out and being used, i am considering buying and installing it. So i was wondering if anyone had done this and exactly how you went about it and how it worked out. would there be any problem going from the x series image to the official f series 3.0 if i just put in the SD and fired it up or will it think it is already updated and stop. thanks again.

I have an Alias 2 (sch-U750). the phone paired ok. but now whenever bluetooth connection is established the phone just keeps reseting. this really sucks because the old alias (sch-u740) works fine and transfers phone book fine. i have searched and cant find a fix. the phone works fine with a bluetooth headset. What is making it keep reseting with my F700?

just to clarify, all i need to do is copy this branding file into the iGo folder and this will work on 3.0? nothing else? thanks guys

audio source must be set to "off" then this option should switch when you push it. something like "Mute" then "Att" (volume lowered but not quite muted) then normal (talks with the music) normal may only be on 3.0 can't remember but the option is greyed out unless audio source is set at "off"

Thanks for the help, i guess i will have to adapt. the info screen will give you a list of all poi's in the area correct? i have mine set to only show gas stations and food on the map and it would be nice to tap the icon and find out what the place is. I am kind of amazed that the avic is not capable of this. Even my 8 year old pocket PC with the compact flash GPS plugged into the top could do this (destinator software) but the avic sure looks a lot better

How do I get information on the POIs that are on the map? I can not find this in the manual. Like when you are driving down the road you see a knife and fork on the screen. Even with my old Omnitech GPS, you touch the poi icon and it will tell you the info such as McDonald's and the address, etc. Any help would be appreciated.

From the manual: Smart Zoom Enables the navigation system to zoom in automatically when you approach a guidance point and zoom out after you pass through it. You can setup the behavior while “Smart Zoom†is activated. When no route is set, the navigation system will simply zoom in or out depending on your speed. My F700 refuses to do this. I have tried 2d and 3d, i have tried all kinds of limits in the smart zoom settings. No matter what my speed the zoom level just stays the same (unless i have a route set). Is this working as described in the manual for anyone? My old gp

i changed the values in the pioneer.ini in the project_config folder. is this any different from the sys.txt change? I used: 3dcarsizemin=3000 3dcarsizemax=5000 and the arrow is just how i want it (except for color). changing the sys.txt would be the easier of the two but i wonder what priority the unit reads this in.

not too great car_blaupunkt is a red triangle with a green ring around it becker_car_gps is a more 3d looking gray arrow with a 3d ring around it thanks again BorisM

thank you for your help BorisM, unfortunately i am not getting very far. my sys.txt does not have the [model] heading. should i add it in or put the entries car="becker_car_gps.mdl" car_ghost="becker_car_ghost.mdl" under the [3d_config] (or some other) heading?

thanks, i guess i will use the avic to view them. in 2.0 i managed to change my red arrow to gray by renaming the gray one to car.mdl since i am sure there is an easier way, do you know if i edit the [model] entry in the color3d.ini in each scheme will this work or do i also need to edit another .ini [model] car="car.mdl" car_ghost="car_grey.mdl" thanks again i am just learing.

don't know if this has been brought up yet but in the gfx folder of the x910's data.zip there are some new .mdl files that aren't in the f one: car_ghost.mdl car_blaupunkt.mdl becker_car_gps.mdl becker_car_ghost.mdl i dont have any 3d software to see what these models look like but might try them out when i get home. hopefully one is better than the spaceship from the f series.

in order to cut costs and remain competitive, a hard (printed) copy of the operation manual is not included with your unit. If you put the red and white CD-ROM into your computer, you will discover a soft copy of the operation manual located thereon.

before you go could we get one last post with your opinions of the Eclipse AVN-726e? thanks.

my suggestion (for what its worth) would be to take the wince files from the PLT forlder of your original back up. boot into service menu update ce with these files on sd choose format option boot into testmode (with old testmode) copy your entire backup of my flash disk to my flash disk reset. if this works (haven't personally tried downgrading ce) you should be back to your original sorry if this is no help i dont think you have the right files for a 3.0 upgrade

when the button on the screen says 2d, it means push for 2d mode (you are in 3d mode). when the button says 3d, it means push for 3d (you are currently in 2d mode). i believe this is where the confusion is for you. the button is not the label for the current mode.

for anyone who cares i went ahead and bought this and it works great. Because of the way it is pinned out, you have to switch the red and yellow (video) rca cables that you plug in to the adapter. This is a handy little thing to keep in the glove box for a quick plug in.

I think this is funny because i can not get my unit to show the phone control box. It has not worked right from day 1. I would really like to have the volume buttons and the end call button, but they never show up. i posted about it a while back but i think it is just the phone, haven't tried another phone yet

i did a search but mostly found people with EU version asking why they dont have VR. so i no longer get the voice command screen when i push in the knob. all i had done was change the 3d_max_tiltlevel in pioneer.ini and renamed car_grey.mdl to car.mdl and vice versa (silver arrow) anyway i did back up my data.zip so i just reverted back to the original and still no voice command when i push in the knob. i have tried waiting a while after startup and i have reset the unit but no luck bringing it back. does anyone know how i can get this work again (well work is a kind word but at lea