suzook Posted May 2, 2008 Report Share Posted May 2, 2008 ftp image worked great. i upgraded my z2 to the z3 with no problems. voice recon is working perfectly along with everything else(so far). i was able to keep my library intact also. thanks for all the people who got this image and the people who posted. this is truly a great site. thanks again did u dl from megaupload or ftp? what is the FIRST WORD in the post that you quoted.... Quote Link to post Share on other sites
typhoon43 Posted May 2, 2008 Report Share Posted May 2, 2008 Got mine up and in. I used the FTP image. Changed the MSV to 18 gigs vs. 9 as well. I have 40 gigs free still (new 80GB Toshiba), but I heard too many things about going bigger and it blowing the image up. It booted and said "applying update" do not turn power off, it then rebooted about 30 seconds later and said "update failed". I was think "oh well, it was worth a try", then it loaded again with the same message, rebooted, then said Update Completed. Booted into the spalsh screen where I was pleasantly greeted with the 02/2008 TeleNav maps. That's all I wanted. God I pray it has my neighborhood in it. Nothing's more pathetic than hitting "go Home" and it basically shows I'm offroading for a mile I hope it stays stable. BIG BIG Thanks to all of you who go this thing ripped. Quote Link to post Share on other sites
garrettoomey Posted May 2, 2008 Report Share Posted May 2, 2008 Just to clarify, but the mega and ftp images came from different sources, so the files are not interchangeable. Quote Link to post Share on other sites
inferno999 Posted May 2, 2008 Report Share Posted May 2, 2008 Just to clarify, but the mega and ftp images came from different sources, so the files are not interchangeable. Sources aside, they should both be of the exact same thing -- a virgin Z3, right? -- and therefore should be interchangeable. ... Problem is, there's a problem, and I'm curious what it is. Quote Link to post Share on other sites
inferno999 Posted May 2, 2008 Report Share Posted May 2, 2008 God I pray it has my neighborhood in it. Congrats! so... does it? Quote Link to post Share on other sites
intenceice Posted May 2, 2008 Report Share Posted May 2, 2008 i downloaded the mega upload septicdeath version and copied it to my HDD np. Quote Link to post Share on other sites
Hyperite Posted May 2, 2008 Author Report Share Posted May 2, 2008 i downloaded the mega upload septicdeath version and copied it to my HDD np. Is anybody NOT having the reboot w/ voice command issue? If so, answer these questions: -What physical model are you upgrading (Z1 or Z2 on the faceplate) -What software are you upgrading (Z1 -> Z3 or Z2->Z3) Quote Link to post Share on other sites
js79 Posted May 2, 2008 Report Share Posted May 2, 2008 I D/L the image from megapath and i have a Z1 that was upgraded last year to Z2 and now Z3 with this image and I can confirm that when hitting the voice command button my unit reboots. I am currently D/L the image from the FTP and will try with that next. Quote Link to post Share on other sites
BigFloppy Posted May 2, 2008 Report Share Posted May 2, 2008 Z1 on the faceplate MegaUpload image Z1 = good Z1 -> Z2 = good (took back to Z1 for sake of upgrade) Z1 -> Z3 = bad (brought back to Z1) Z1 (good) -> Z2 (good) -> Z3 = bad Quote Link to post Share on other sites
intenceice Posted May 2, 2008 Report Share Posted May 2, 2008 i downloaded the mega upload septicdeath version and copied it to my HDD np. Is anybody NOT having the reboot w/ voice command issue? If so, answer these questions: -What physical model are you upgrading (Z1 or Z2 on the faceplate) -What software are you upgrading (Z1 -> Z3 or Z2->Z3) i have a Z2 upgrading to z3 i have not tried the Z3 image in my Z2 yet but the megaupload image i downloaded was successfully copied to my MK4025GAS HDD but i need to remove the security before putting it in my drive first. will let you know if i get the rebooting issue or not. Quote Link to post Share on other sites
jkawar Posted May 2, 2008 Report Share Posted May 2, 2008 I just installed the FTP image with the new part 1....no problems!!! Thanks to everyone. I didn't use the entire image, instead I used the instructions provided to maintain my music and settings from my old Z2 image and just applied the new maps and software partitions. This was all done on the original Z1 unit. Oh yeah, no reboots from voice command. Hopefully everything stays stable. Quote Link to post Share on other sites
bigman411 Posted May 2, 2008 Report Share Posted May 2, 2008 Thanks again! Just put HD back in. Got it from FTP, redownloaded new part 1. Works like a charm. I just did the first 2 partitions so I could keep my music and settings. No issues with voice command on booting. Went from z1 to z2 now z3. Thanks Quote Link to post Share on other sites
ro.sniper Posted May 2, 2008 Report Share Posted May 2, 2008 so pretty much the mega upload image is a fail for voice command Quote Link to post Share on other sites
js79 Posted May 2, 2008 Report Share Posted May 2, 2008 The second software partition on the mega image has 365MB of data and the partition on the FTP is 428MB of data. This is where the problem lies i believe. Quote Link to post Share on other sites
Hyperite Posted May 2, 2008 Author Report Share Posted May 2, 2008 The second software partition on the mega image has 365MB of data and the partition on the FTP is 428MB of data. This is where the problem lies i believe. Whatever, no use in wasting time trying to figure it out. I removed it from the first post. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.