HeyRobi Posted September 8, 2008 Report Share Posted September 8, 2008 I'm just curious why the east coast disk hasn't popped up yet? Quote Link to post Share on other sites
PT3005 Posted September 8, 2008 Report Share Posted September 8, 2008 I'm just curious why the east coast disk hasn't popped up yet? Me Too Quote Link to post Share on other sites
CiD Posted September 8, 2008 Report Share Posted September 8, 2008 My burn was fine... This iso does not work with the D1.... I took that same disc and put it in my D3 and it read fine no problem... (Yes i own a D1 and a D3...) Â CiD Quote Link to post Share on other sites
Mak30 Posted September 8, 2008 Report Share Posted September 8, 2008 can someone please just send me a cd that works!..i'll even pay ya! Â send pm plz Quote Link to post Share on other sites
cvrefugee Posted September 8, 2008 Report Share Posted September 8, 2008 Startin to think it might be my burner. I have a GSA-4160B and its dual layer but I did exactly what the direction stated. I just got an error statin " Invalid field in parameter list" and what not  It might also be the quality of the blank DVD+DL discs you purchased. I normally use Verbatim without issues. Quote Link to post Share on other sites
numberone Posted September 8, 2008 Report Share Posted September 8, 2008 I'm just curious why the east coast disk hasn't popped up yet? Â Me to. The n5 comes with both cds. How would someone only have one? Quote Link to post Share on other sites
shonseb Posted September 8, 2008 Report Share Posted September 8, 2008 The uploader only had the west disc. I need the east coast disc as well. My original (cough cough) is really getting bad..... Quote Link to post Share on other sites
allsounds Posted September 8, 2008 Report Share Posted September 8, 2008 If anyone wants me to Burn them a copy of the DVD Dual layer that I know works in my D3, I would be willing to do:  $7.00 $5.00 shipping  and $10.00 for my time and the wear and tear on my new burner.  This should only be if you need a backup of course. Anyone that wants it will have it mailed out the next business day ups with a tracking number. Quote Link to post Share on other sites
mkjservices Posted September 8, 2008 Report Share Posted September 8, 2008 Anybody whom still has a warranty at any store should just brick the thing with the new map and bring it back to the store with the original maps. Then get the f900bt it is truly 2000% better than the d3. Trust me I was a heavy d3 believer and after I installed my f900bt man what a difference. Quote Link to post Share on other sites
AVICTC Posted September 8, 2008 Report Share Posted September 8, 2008 CiD - I knew it! I was going crazy trying to figure out why my burn wasn't working. Thanks for confirming this doesn't work with the D1, I guess I'll just have to wait for the real one to come out. Â If anyone wants a perfectly good backup disk for their D3, let me know. I have four copies that are absolutely useless to me. Quote Link to post Share on other sites
kryngle Posted September 8, 2008 Report Share Posted September 8, 2008 Startin to think it might be my burner. I have a GSA-4160B and its dual layer but I did exactly what the direction stated. I just got an error statin " Invalid field in parameter list" and what not  That's an old burner. First see if there are firmware upgrades for that burner by clicking on the link below: http://cdrinfo.com/Sections/Firmware/Si ... riveId=984  Second, there is a "Book Type" setting in imgburn that you should verify. It's in the lower right hand corner of the program. Confirm you have it set for DVD-ROM under the dual layer setting.  Note that if you update the firmware of your LG, you may need to reset the book type setting.  Hey Itchy I been to that site and it tranfers me to some asian site and I can't ready what is writin. Is there an english version? Quote Link to post Share on other sites
sl0wsierra Posted September 9, 2008 Report Share Posted September 9, 2008 CiD - I knew it! I was going crazy trying to figure out why my burn wasn't working. Thanks for confirming this doesn't work with the D1, I guess I'll just have to wait for the real one to come out. Â If anyone wants a perfectly good backup disk for their D3, let me know. I have four copies that are absolutely useless to me. Â you can send one my way Quote Link to post Share on other sites
Itchy Posted September 9, 2008 Report Share Posted September 9, 2008 Startin to think it might be my burner. I have a GSA-4160B and its dual layer but I did exactly what the direction stated. I just got an error statin " Invalid field in parameter list" and what not  That's an old burner. First see if there are firmware upgrades for that burner by clicking on the link below: http://cdrinfo.com/Sections/Firmware/Si ... riveId=984  Second, there is a "Book Type" setting in imgburn that you should verify. It's in the lower right hand corner of the program. Confirm you have it set for DVD-ROM under the dual layer setting.  Note that if you update the firmware of your LG, you may need to reset the book type setting.  Hey Itchy I been to that site and it tranfers me to some asian site and I can't ready what is writin. Is there an english version?   just go to cdrinfo.com, select download, then firmware, then your drive type: IDE, LG, model #. Download the latest firmware. Quote Link to post Share on other sites
kryngle Posted September 9, 2008 Report Share Posted September 9, 2008 I jus updated the drive from the LG website. I now have the A306 version installed. I erased MagicISO off my comp and gonna try this from scratch and see wats up.  Startin to think it might be my burner. I have a GSA-4160B and its dual layer but I did exactly what the direction stated. I just got an error statin " Invalid field in parameter list" and what not  That's an old burner. First see if there are firmware upgrades for that burner by clicking on the link below: http://cdrinfo.com/Sections/Firmware/Si ... riveId=984  Second, there is a "Book Type" setting in imgburn that you should verify. It's in the lower right hand corner of the program. Confirm you have it set for DVD-ROM under the dual layer setting.  Note that if you update the firmware of your LG, you may need to reset the book type setting.  Hey Itchy I been to that site and it tranfers me to some asian site and I can't ready what is writin. Is there an english version?   just go to cdrinfo.com, select download, then firmware, then your drive type: IDE, LG, model #. Download the latest firmware. Quote Link to post Share on other sites
AVICTC Posted September 9, 2008 Report Share Posted September 9, 2008 You know what, I was just reading through some old posts and I remembered that there was an issue with the 70 disks only working when it was burned with Alcohol 120. I'm tempted to go out and buy ANOTHER set of DL disks and give it a shot, but I'd rather hear someone tell me that they already used Alcohol 120 and tested the disk in a D1...anyone? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.