donasp Posted October 4, 2015 Report Share Posted October 4, 2015 My Pioneer is the Model Avic-F10BT and i have bought in 2009. Can I upgrade? Thanks Quote Link to post Share on other sites
djalexnl Posted October 4, 2015 Report Share Posted October 4, 2015 Upgraded F9210bt succesfull!!! Can add it to the list. Instructions used are on this forum! Thanks all!! Quote Link to post Share on other sites
xavstar Posted October 4, 2015 Report Share Posted October 4, 2015 I share my experience with F9310BT sorry formy bad english. I installed freshly the new 2015 maps with flomsen files. The update during 20 to 30 minutes and everything works fine. I don't need to update the TTS files. I ´ve updated too theBT firmware. It's allright. A french user. Big thx to flomsen for sharing files and pionara for the hack thx a lot +++ Xavstar Quote Link to post Share on other sites
ulito44 Posted October 6, 2015 Report Share Posted October 6, 2015 Habe die Testmode auf mein Avic F940BT geladen und auch ein Backup gemacht. Leider komme ich mit der Installierung der NAVTEQ südamerica-Karte von Garmin nicht weiter. Hier im Forum habe ich gelesen, dass man den Ez-Rider im Ordner Apl2/iGo durch einen bearbeiteten ersetzen soll. Dann soll man alle Karten im Ordner Apl2/iGo/Content/Map löschen und durch die neuen(Südamerica) ersetzen. Ich finde aber in meinem System nicht die angegebenen Ordner. Wer kann mir weiter helfen? Vielen Dank und Gruß Uli Have the test mode loaded on my Avic F940BT and also made a backup. Unfortunately I can not continue with the installation of the NAVTEQ map of South America-Garmin. Here in the forum I have read that you should replace the Ez-Rider in APL2 / iGo folder by edited. Then one should remove all the cards in APL2 / iGo / Content / Map folder and replace it with the new (South America). But I find in my system not specified folder. Who can help me? Thanks and regards Uli Quote Link to post Share on other sites
gemma99 Posted October 6, 2015 Report Share Posted October 6, 2015 My Pioneer is the Model Avic-F10BT and i have bought in 2009. Can I upgrade? Thanks yes, download the files from the first post and follow the instructions. very easy Quote Link to post Share on other sites
Mr.Cool Posted October 7, 2015 Report Share Posted October 7, 2015 Hi all !! Can i use this map update for the F900BT too ? Quote Link to post Share on other sites
Mr.Cool Posted October 7, 2015 Report Share Posted October 7, 2015 Sorry but i do NOT find any password ! PLEEAAASE !!! Quote Link to post Share on other sites
tanoli Posted October 7, 2015 Report Share Posted October 7, 2015 i think no one in this community has f50bt maps ,now device is useless for me with with factory maps Quote Link to post Share on other sites
Gallux Posted October 8, 2015 Report Share Posted October 8, 2015 F-10BT mission complete works perfectly 1st post dowloaded + cardinfo.txt from 2013 maps Quote Link to post Share on other sites
rcdean Posted October 8, 2015 Report Share Posted October 8, 2015 Hi I can't download the update files, google drive says I need permission Quote Link to post Share on other sites
Tudor Z Posted October 8, 2015 Report Share Posted October 8, 2015 Looks like I'm late to the party, can you give me access to the file, i've sent a request for both. Thanks! PS - Does anyone have a mirror besides google drive? Quote Link to post Share on other sites
sertur Posted October 8, 2015 Report Share Posted October 8, 2015 Hi, I'm owner of f930bt and I want to donwload the files to update my pionner. but when I try to download but I 'm going to google drive. It's correct??? Please, If anyone can help me....Help me!!! :? Thanks in advance Quote Link to post Share on other sites
abre Posted October 9, 2015 Report Share Posted October 9, 2015 Hi, I'm owner of f930bt and I want to donwload the files to update my pionner. but when I try to download but I 'm going to google drive. It's correct??? Please, If anyone can help me....Help me!!! :? Thanks in advance yes Quote Link to post Share on other sites
iordachics Posted October 9, 2015 Report Share Posted October 9, 2015 Hi to every one! I have avic F40BT. After RenewalIFLib modifications and 25 mins of instalation I get the menu of avic. I can't press find address only history and pois are available, going to BT all buttons are inactive, in settings I have only audio and video button working. Any idea what I did wrong? maybe smb had the same problem? will apreciate your help very much Quote Link to post Share on other sites
abre Posted October 9, 2015 Report Share Posted October 9, 2015 Hi to every one! I have avic F40BT. After RenewalIFLib modifications and 25 mins of instalation I get the menu of avic. I can't press find address only history and pois are available, going to BT all buttons are inactive, in settings I have only audio and video button working. Any idea what I did wrong? maybe smb had the same problem? will apreciate your help very much The problem is likely to be because you did the RenewallFLib mod... Which is not required. All you needed was the download of the software from post 1, that download already includes the file fixed by Pionara. Reinstall without doing the RenewallFLib mod Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.