Jump to content
AVIC411.com

BuffaloSS

Members
  • Content Count

    374
  • Joined

  • Last visited

Everything posted by BuffaloSS

  1. Also, if you choose to "hide" the navi display, it will show your navi background. The navi prompts will still pop up whenever you have a change in direction coming up.
  2. To elaborate on what VBlUE mentioned, make sure your cable is in the right port on the bluetooth module. It fits in both the input and output. You need to be plugged into the output. One thing I've noticed is that the phone doesn't always use the BT module for sound after making or receiving the first call. The first call always defaults to bluetooth, but subsequent calls vary. Once in a while I need to change the source from "phone" to point it back to "bluetooth."
  3. I don't believe mine does this, nor has it ever. Also, I've never seen a setting to change anything in this regard.
  4. I'd recommend spending a little more and getting the bluetooth module. My 16Gb iPhone 3Gs and 16Gb iPod Touch 2nd Gen work great via bluetooth.
  5. Are you using a burned map disc? Others have had that fail over time, causing that issue.
  6. Are you sure no wires have been rubbed bare on something metal?
  7. This doesn't work for me either, but I haven't really looked into it too much. I wish there was a fix, b/c unlocking the phone and pressing next track is a PITA while driving.
  8. This has been posted before, but nicely written. I had to do this a couple years ago and it worked like a charm.
  9. So the D3 finds the phone, or the phone finds the D3?
  10. My thoughts exactly....lol Seriously, you need to try to move the RCA cables and other adapter boxes around back there, if used. If it fit before, it will again... ...and that's what SHE said.
  11. That's the problem. You don't want to read for your answer, which is undoubtedly posted somewhere, so you post YET ANOTHER THREAD about iPod compatibility.
  12. You need the PAC Audio SWI-PS for the steering wheel controls. Not an easy unit to get to work correctly or long term. For the Bose/Chime adapter, check out Metraonline.com...you're going to need a GMOS-LAN-XX unit, where XX is 01-04.
  13. Error 11 says iPod needs to be charged, but I'm guessing that's not the issue in your case.
  14. According to the manual, it says for Error Code 11: Cause: Connected iPod with no charge. Action: Turn "iPod charge" option to "on" or connect a charged iPod. I'm assuming your iPod is charged, though...?
  15. Is it just one speaker, or all of them that are whining?
  16. Only mention of specific errors in the manual are #11 and 21, both of which apply to iPod connections. There is a disc read error that should show up in the following format: ERROR-02-XX - with XX possibly being the error code?
  17. Answer to #1 is "Not possible" Don't have the answer to #2 #3 - No, no new firmware...just map and POI updates. #4 is here: viewtopic.php?f=21&t=12163
  18. BuffaloSS

    avic d3 ???

    Pretty sure most iPods will connect using the iPod-specific cable.
  19. If your speed pulse is 0, you do not have the VSS wire hooked up. It's not 100% necessary, but it will make the gps track more accurately. I don't know if that has anything to do with the excess vibration, though.
  20. It would help if you were in the right section, too.
  21. Do you still use OnStar? If not, you could always pop open the mirror and install the Pioneer mic in its place. I'm sure it could be done with little effort and a small amount of ingenuity.
  22. I cannot remember how, exactly, to see what phones are registered with the d3, but get into the Bluetooth Phone area and just go across the menu bar and poke around...it's not hard. My old RAZR V3xx (AT&T) auto-connected just fine. There was a setting in the phone to "always allow" it to connect without prompting.
  23. No way. Even with XM and Bluetooth modules, if you have them, I wouldn't expect to see much more than $400. You can get new F-series units on ebay for less than $500, can't you?
  24. Pretty certain that you can jump right into the green "update" disc. If the unit it running right now (everything 'cept east-coast nav), the unit has the original firmware installed and can accept the update disc.
×
×
  • Create New...