tail24 Posted August 1, 2009 Report Share Posted August 1, 2009 Keeper, I tried to change the brake speed as you suggest, but once again, all my system ever does is reboot.Can you please add the 256 to your pioneer.ini file. go to the keeper plus speedcam thread and go to page 1 scroll towards the bottom and look for my post about the 4 mods in one zip and download it it has keepers pluss speedcam plus software bypass plus carvers nag screen mod in there just need to follow directions. Quote Link to post Share on other sites
tail24 Posted August 1, 2009 Report Share Posted August 1, 2009 Keeper, I tried to change the brake speed as you suggest, but once again, all my system ever does is reboot.Can you please add the 256 to your pioneer.ini file. go to the keeper plus speedcam thread and go to page 1 scroll towards the bottom and look for my post about the 4 mods in one zip and download it it has keepers pluss speedcam plus software bypass plus carvers nag screen mod in there just need to follow directions. Quote Link to post Share on other sites
diaftia Posted August 1, 2009 Report Share Posted August 1, 2009 FYI- I have tried all of the mods to add in the speed limit signs with current speed (from the FAQ thread) as well as maverickster's version of the current speed mod. Neither of them even show up on the screen. I also tried the house number mod and that didnt work either. Not sure if its because they are 2.0 mods and don't work with the 8.3 iGo or if they are incompatible with Keepers mods. Could also just be the fact that I tried my own mod of the navigatemapXXX.ui file for the first time and it just downright did not work. I did however get the custom branded icons to work with Keepers (actually adam's version of keepers) mods. Quote Link to post Share on other sites
gizzy69 Posted August 2, 2009 Report Share Posted August 2, 2009 hey keeper ive done your mod and it looks good. i noticed on your first pic not alot of street names are present. mine looks the same. i have messed with the zoom. but the four way no longer comes out on your mod when you tap the screen. in 2.0 we could adjust the clip_plane ini. man im not complaining im just trying to dig deeper into this endeaver. thanks alot Quote Link to post Share on other sites
N-S-E-W Posted August 2, 2009 Report Share Posted August 2, 2009 hey keeper ive done your mod and it looks good. i noticed on your first pic not alot of street names are present. mine looks the same. i have messed with the zoom. but the four way no longer comes out on your mod when you tap the screen. in 2.0 we could adjust the clip_plane ini. man im not complaining im just trying to dig deeper into this endeaver. thanks alot clip_planes.ini did not come with any of the Pioneer units. Those that had it were, either manually added, or was added by someone sharing their zip. Not sure about 3.0 but you try to add a clip_planes.ini to the common folder. See this thread, specifically the first post that has clip_plane settings and the last post post for suggested road sign settings. YMMV. viewtopic.php?f=34&t=21572 If that doesn't work try adding it directly into a color scheme. Quote Link to post Share on other sites
ill.die.trying Posted August 3, 2009 Report Share Posted August 3, 2009 FYI- I have tried all of the mods to add in the speed limit signs with current speed (from the FAQ thread) as well as maverickster's version of the current speed mod. Neither of them even show up on the screen. I also tried the house number mod and that didnt work either. Not sure if its because they are 2.0 mods and don't work with the 8.3 iGo or if they are incompatible with Keepers mods. Could also just be the fact that I tried my own mod of the navigatemapXXX.ui file for the first time and it just downright did not work. I did however get the custom branded icons to work with Keepers (actually adam's version of keepers) mods. it might be that the speed limit is not available on the part of your street that's why it's not showing up, try driving to a major highway and see if something comes up, i haven't tried adding it yet on my mod but i don't think it'll be a problem as so far i'm pretty much just copy/pasting my previous mod to the 3.0 Quote Link to post Share on other sites
Jojeli Posted August 3, 2009 Report Share Posted August 3, 2009 Hi Jörg, I got confirmation from Pioneer that TMC doesn't work in Finland, as it has to be licensed from service provider (Destia) and Pioneer hasn't licensed it yet, maybe in future. Also, Pioneer support told me that in Germany TMC service provider is using same encryption with TMC as in Finland, and GPS manufacturers have to buy license from service provider, do you know if its true? Therefore I might be able to hack TMC to work in Finland too. Process might be this simple: 1. Locate where TMC decryption key is saved in Avic system files 2. Copy key value from any other GPS system that has been licensed to work in Finland I will start this project comparing 2.7 updates downloaded from German site and EU site, to check if there's any differences, of course its possible that TMC license file is not located in those updates. Jörg; have you upgraded your Avic to 3.0 version using APL2-folder located in ftp.turboss.com -site? You have to look into your Sys.txt first line should be [device] type="PIONEER746EW" I assume your device thinks it is an US model at the moment Had the same Problem when implementing US mods under 2.0 let me know if it works Jörg Quote Link to post Share on other sites
69sixpackbee Posted August 3, 2009 Report Share Posted August 3, 2009 ***deleted*** Quote Link to post Share on other sites
diaftia Posted August 3, 2009 Report Share Posted August 3, 2009 FYI- I have tried all of the mods to add in the speed limit signs with current speed (from the FAQ thread) as well as maverickster's version of the current speed mod. Neither of them even show up on the screen. I also tried the house number mod and that didnt work either. Not sure if its because they are 2.0 mods and don't work with the 8.3 iGo or if they are incompatible with Keepers mods. Could also just be the fact that I tried my own mod of the navigatemapXXX.ui file for the first time and it just downright did not work. I did however get the custom branded icons to work with Keepers (actually adam's version of keepers) mods. it might be that the speed limit is not available on the part of your street that's why it's not showing up, try driving to a major highway and see if something comes up, i haven't tried adding it yet on my mod but i don't think it'll be a problem as so far i'm pretty much just copy/pasting my previous mod to the 3.0 I understand but current speed, elevation, etc are not showing up either. Nothing is. Even if the posted speed limit is not shown the current speed should always be there even if you are not moving. Quote Link to post Share on other sites
Jojeli Posted August 4, 2009 Report Share Posted August 4, 2009 It looks like that with iGo 8.3 you have to use different code for displaying f.ex. speed limit signs. I tried to google with variable name "navigation.current_speed_limit" thats used when displaying speed limit signs and find this code example in other forum: http://forum.ppcwarez.org/viewtopic.php?p=417615#417615 in 2.0 mods code was: phasemodel="navigation.current_speed_limit" in ppcwarez-forum code was: textmodel_wstr="navigation.current_speed_limit.number_text" So that's propably first change that should be done when converting speed limit sign codes to v3. I'm too busy to test this myself before weekend, but feel free to try it Quote Link to post Share on other sites
diaftia Posted August 4, 2009 Report Share Posted August 4, 2009 It looks like that with iGo 8.3 you have to use different code for displaying f.ex. speed limit signs. I tried to google with variable name "navigation.current_speed_limit" thats used when displaying speed limit signs and find this code example in other forum: http://forum.ppcwarez.org/viewtopic.php?p=417615#417615 in 2.0 mods code was: phasemodel="navigation.current_speed_limit" in ppcwarez-forum code was: textmodel_wstr="navigation.current_speed_limit.number_text" So that's propably first change that should be done when converting speed limit sign codes to v3. I'm too busy to test this myself before weekend, but feel free to try it Hmmm... this is interesting because the code that I used appears to be 8.3 then, that is unless you posted these backwards. The code I used was this: ;Display Posted Speed Limit And nothing came up... Quote Link to post Share on other sites
Jojeli Posted August 5, 2009 Report Share Posted August 5, 2009 Hmm...only difference between your code and PPCWarez-code is that inside SPRITE-tag you have set variable phasemodel="navigation.current_speed_limit" but that variable is completely missing in PPCwarez example, could that be the problem? Quote Link to post Share on other sites
diaftia Posted August 5, 2009 Report Share Posted August 5, 2009 Hmm...only difference between your code and PPCWarez-code is that inside SPRITE-tag you have set variable phasemodel="navigation.current_speed_limit" but that variable is completely missing in PPCwarez example, could that be the problem? Oddly enough this is what IDT used in his 4.2 mods for 2.0: ;Current clocked speed Yet his shows speed when not in route. lol. I think I need a list of accepted variables and I could get this to work. Keeper, if you are still reading this; how did you find out what the accepted variables are that you can enter into your configs? Seems like there is "gps.XXXX_XXX", "navigation.XXX"_XXX", "map.XXX_XXX", "poi.XXX_XXX" and they all have flags you can pass them. Is this in a FAQ someplace that I have missed? Quote Link to post Share on other sites
diaftia Posted August 7, 2009 Report Share Posted August 7, 2009 OK I have the road signs complete. This is an extension of Adam's and tail24's mods by keeper with my additions to their additions. What you get is: Current Speed when cruising and in route Current Elevation when cruising and in route Posted speed when cruising and in route (when available) Speed cams Navigation warning removal for most screens Branding icons Vblues red diamond branding icon fix All of Keepers mods This is everything included so read the enclosed instructions: EDIT: File updated. DATA.zip had a problem when being compressed but all is working now. http://www.mediafire.com/file/ojunnzlmz ... mbined.rar Not navigating: Navigating: Quote Link to post Share on other sites
rollgrinder Posted August 7, 2009 Report Share Posted August 7, 2009 Is this the same MOD that you posted on Keepers + speedcam viewtopic.php?f=34&t=26108&p=179896#p179896 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.