Chuck88 Posted March 26, 2010 Report Share Posted March 26, 2010 Yeah, a pic would be great, so that way I will have something that I can work around. Thanks Abb, so here is the pic taken during a Route Simulation, sorry for its quality though ... as you can see on the lower left corner, current speed overlaps with lane info. As for the signposts, I think that the menu buttons are not shown while the signposts are displayed. Is this the intent? I don't know, if so then it is good. I will confirm the menu buttons disapperance later during real drive. EDITED: The buttons are shown under the signposts, not disappeared, just underneath. Quote Link to post Share on other sites
abb1 Posted March 27, 2010 Author Report Share Posted March 27, 2010 So the speed is only in the way during navigation, not when it is in the top left corner during regular driving? Quote Link to post Share on other sites
Chuck88 Posted March 27, 2010 Report Share Posted March 27, 2010 Yes. During normal driving there is no issue, because the LANE INFO would not be shown during normal driving . Quote Link to post Share on other sites
Chuck88 Posted March 27, 2010 Report Share Posted March 27, 2010 Since there is no more space on the left side, considering also the additional commands for route simulation as in the above photo, I would suggest, during navigation ONLY, putting the current speed at the right side. But use a white box like the speed limit sign instead (as previous used in IDT's mods), as this would be really neat . Quote Link to post Share on other sites
abb1 Posted March 27, 2010 Author Report Share Posted March 27, 2010 So, the only problem is through 'Route simulation', not in actual navigation? I dont really want to put up the speed sign because that is one more icon to clutter up the screen. My whole idea for this is to have a full featured mod without all the clutter on the screen. Hmm, I can move the speed out of the Nav part, that is not too difficult if it is a problem Quote Link to post Share on other sites
Chuck88 Posted March 27, 2010 Report Share Posted March 27, 2010 So, the only problem is through 'Route simulation', not in actual navigation? No Abb. By normal driving I mean "not in the navigation mode" (i.e. you don't have a destination set and active). "Route simulation" is exactly the same as Navigation, except that you can control the speed, pause etc, therefore they both have this overlapping problem. I guess it should be fixed . Hope that it is clearer now. Quote Link to post Share on other sites
abb1 Posted March 27, 2010 Author Report Share Posted March 27, 2010 So, the only problem is through 'Route simulation', not in actual navigation? No Abb. By normal driving I mean "not in the navigation mode" (i.e. you don't have a destination set and active). "Route simulation" is exactly the same as Navigation, except that you can control the speed, pause etc, therefore they both have this overlapping problem. I guess it should be fixed . Hope that it is clearer now. Ok, I got it fixed and changed. I will test it out tomorrow and post it tomorrow night if all is good. Thanks! Quote Link to post Share on other sites
hanibal Posted March 27, 2010 Report Share Posted March 27, 2010 How do we change the colour of the car icon? Quote Link to post Share on other sites
Chuck88 Posted March 27, 2010 Report Share Posted March 27, 2010 How do we change the colour of the car icon? You can't do that. The color is embedded in the original design of the car. You can only scale it. Quote Link to post Share on other sites
Chuck88 Posted March 27, 2010 Report Share Posted March 27, 2010 Hi everyone, A short question, a bit off topic here: what is the parameter to modify to change the navigation color of the calculated route, within COLOR.INI or COLOR3D.INI? What is the different usage between the two files? Sometime the COLOR3D.INI is not present for a scheme. I am using GJ2.1_Night_sky2 scheme, very nice but the calculated route during navigation is BLACK, very hard to read. Thanks. Quote Link to post Share on other sites
abb1 Posted March 27, 2010 Author Report Share Posted March 27, 2010 Well, V1.01 is up for download. The only difference is the fix for the lane bar while navigating. I will update photos later tonight. Thanks Chuck, for pointing this out. As far as your question about the schemes, the person to ask is DPHurst. PM him as he designed all these awesome schemes and he is the master when it comes to schemes. I have tried messing with the color.ini without any luck, but maybe Dave can shed some light on it. Good luck Quote Link to post Share on other sites
Chuck88 Posted March 27, 2010 Report Share Posted March 27, 2010 Thank you very much Abb, for your hard work to maintain such a nice mod and for the tip lead to DPHurst. I will PM him directly. Later. Quote Link to post Share on other sites
bigboy Posted March 27, 2010 Report Share Posted March 27, 2010 abb, awesome mod. I have been an IDT follower since he started putting his mods up but tried this for a change of pace and hte options you give. However, one problem that must be embedded in IDTs info somewhere maybe you can help me out. Here is the error I get, I click "ok " and it goes away and nav seems to work fine as far as I can tell, hopefully I get this right enough for you to help: FFUIERROR: unknown object identifier Identifier [txt_date] script "sc_IDTnavtext_color_green" comand 12 Can you possibly tell me how to fix that? Thanks Try deleting all your save files in 'userdata'. It is looking for a green text that was present before you installed the mod and now isnt. deleting your prior cache will get rid of that. I also have same problem . If I don’t change text color in navi settings all works nice but when I try to change yellow color I have same error .I delete save files from userdata/igo/save. Thanks for any help Quote Link to post Share on other sites
Chuck88 Posted March 27, 2010 Report Share Posted March 27, 2010 Hi Abb, in V1.01, the current speed during navigation has been moved from left to right, but the shaded box used to seat the speed previously was still there on the left side, but empty now. Quote Link to post Share on other sites
abb1 Posted March 28, 2010 Author Report Share Posted March 28, 2010 Hi Abb, in V1.01, the current speed during navigation has been moved from left to right, but the shaded box used to seat the speed previously was still there on the left side, but empty now. Yeah, I changed the box and got rid of the section with the speed as it is now moved. There is no sense in having an empty box in the cockpit. Also, this space is now clear for the lane info. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.