N-S-E-W Posted January 28, 2009 Report Share Posted January 28, 2009 Thanks Boris. I'll give it a shot if I'm able to find the right combination of buttons. Quote Link to post Share on other sites
BorisM Posted January 28, 2009 Author Report Share Posted January 28, 2009 Thanks Boris. I'll give it a shot if I'm able to find the right combination of buttons. You're welcome! Good luck! Quote Link to post Share on other sites
N-S-E-W Posted January 30, 2009 Report Share Posted January 30, 2009 Thanks Boris. I'll give it a shot if I'm able to find the right combination of buttons. You're welcome! Good luck! Hi Boris, I found a pause button on an IGO zip. It was a bit smaller than the buttons you used, but I thought I'd give it a shot. Well anyways, I couldn't get it to work right. I added the simulate_pause to the navigate800 file as well as the scrpits in the route.ui file. I tried a few different things after the first couple did not work. Below is the latest version I had in. I realize it's a bit cold to go out and test but if you can give me a couple other ideas I'll try them out. Oh, the pluses of a 500bt when we have a crappy winter like this year. It's a balmy 14 degrees at my place right now. Stay warm and I look forward to hearing from you. ; BM - extra controls edited to add- the bmp shows only when I select flyover. It does pause the route when you press the button but does not resume no matter if you push pause, fast or slow arrows. At least we know simulate_pause does do something. Quote Link to post Share on other sites
BorisM Posted January 30, 2009 Author Report Share Posted January 30, 2009 I found a pause button on an IGO zip. It was a bit smaller than the buttons you used, but I thought I'd give it a shot. Well anyways, I couldn't get it to work. I added the simulate_pause to the navigate800 file as well as the scrpits in the route.ui file. I tried a few different things after the first couple did not work. Below is the latest version I had in. I realize it's a bit cold to go out and test but if you can give me a couple other ideas I'll try them out. Oh, the pluses of a 500bt when we have a crappy winter like this year. It's a balmy 14 degrees at my place right now. Stay warm and I look forward to hearing from you. ; BM - extra controls I'll have to remember what I did there... Pause worked as well as faster/slower, so it should be possible... Quote Link to post Share on other sites
N-S-E-W Posted February 2, 2009 Report Share Posted February 2, 2009 Hi Boris, I got it working now, including the resume function. The faster, slower, pause and resume buttons show in both the simulate and flyover screens. I found where I had made an error in the route.ui file. Once I put everything in the right place, viola success. I could not find a good combination of existing buttons, so I modified a couple. Please excuse the appearance of these. Graphic modifications is not a strong point or a medium point for that matter. Quote Link to post Share on other sites
BorisM Posted February 2, 2009 Author Report Share Posted February 2, 2009 Looks good to me... Quote Link to post Share on other sites
kerosene Posted February 7, 2009 Report Share Posted February 7, 2009 damn nice boys... nsew you are in burbs? I didnt know you were in IL Quote Link to post Share on other sites
N-S-E-W Posted February 8, 2009 Report Share Posted February 8, 2009 That's the nice thing about route simulation. You can simulate a route with any starting point. Just this morning I drove through Salt Lake City at 4583 mph. I took a drive from Phoenix through Sedona, then took a back highway through the mountains enroute to Flagstaff. Quote Link to post Share on other sites
kerosene Posted February 8, 2009 Report Share Posted February 8, 2009 true, but... whats the chance you'd choose a small burb like rm as your destination Quote Link to post Share on other sites
N-S-E-W Posted February 8, 2009 Report Share Posted February 8, 2009 Well, I wasn't there for long. I was doing 830 mph while I was slowing down to take the exit. I was looking for interchanges to test the lane arrows. I was working on getting them to show centered no matter if there were two lanes or seven or so lanes. They're all set now. I've made room to allow for up to 11 lanes to show. More will show if there's no speed limit data or speed cameras in the area. Far NW - not sure if they consider my area the burbs or not. Probably rural. Quote Link to post Share on other sites
kerosene Posted February 9, 2009 Report Share Posted February 9, 2009 by crystal lake and algonquin or way further? Quote Link to post Share on other sites
Toxit Posted February 26, 2009 Report Share Posted February 26, 2009 Hi N-S-E-W, The route simulation looks great. Can you give me more information on how you got it to work like that? Can you post the .ui and icons files you modified? Thanks alot!! Quote Link to post Share on other sites
NotYourAveJoe Posted February 26, 2009 Report Share Posted February 26, 2009 Well, I wasn't there for long. I was doing 830 mph while I was slowing down to take the exit. I was looking for interchanges to test the lane arrows. I was working on getting them to show centered no matter if there were two lanes or seven or so lanes. They're all set now. I've made room to allow for up to 11 lanes to show. More will show if there's no speed limit data or speed cameras in the area. Far NW - not sure if they consider my area the burbs or not. Probably rural. Wauconda, Island Lake? Quote Link to post Share on other sites
scwheeler Posted February 26, 2009 Report Share Posted February 26, 2009 Any update on the English speedcam warnings, the current setup is driving me insane? Thanks, Steve Quote Link to post Share on other sites
Toxit Posted February 26, 2009 Report Share Posted February 26, 2009 Hi Guys, I'm trying to script the simulation controls and I'm stuck on the resume function. I see that the scriptcommand for pausing the simulation is SIMULATE_PAUSE. What is the resume command? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.