BorisM Posted February 26, 2009 Author Report Share Posted February 26, 2009 Any update on the English speedcam warnings, the current setup is driving me insane? Thanks, Steve Nothing yet... I've started playing with it myself so when the weather picks up I might have something... Quote Link to post Share on other sites
BorisM Posted February 26, 2009 Author Report Share Posted February 26, 2009 Hi Guys, I'm trying to script the simulation controls and I'm stuck on the resume function. I see that the scriptcommand for pausing the simulation is SIMULATE_PAUSE. What is the resume command? SIMULATE_RESUME Quote Link to post Share on other sites
dumpystig Posted February 26, 2009 Report Share Posted February 26, 2009 Hi Guys, I'm trying to script the simulation controls and I'm stuck on the resume function. I see that the scriptcommand for pausing the simulation is SIMULATE_PAUSE. What is the resume command? SIMULATE_RESUME Haha! very good Boris Quote Link to post Share on other sites
N-S-E-W Posted February 26, 2009 Report Share Posted February 26, 2009 Hi Guys, I'm trying to script the simulation controls and I'm stuck on the resume function. I see that the scriptcommand for pausing the simulation is SIMULATE_PAUSE. What is the resume command? SIMULATE_RESUME Haha! very good Boris That's really the one. I'm using it myself. Quote Link to post Share on other sites
N-S-E-W Posted February 26, 2009 Report Share Posted February 26, 2009 Well, I wasn't there for long. I was doing 830 mph while I was slowing down to take the exit. I was looking for interchanges to test the lane arrows. I was working on getting them to show centered no matter if there were two lanes or seven or so lanes. They're all set now. I've made room to allow for up to 11 lanes to show. More will show if there's no speed limit data or speed cameras in the area. Far NW - not sure if they consider my area the burbs or not. Probably rural. Wauconda, Island Lake? Currently Peoria, Az Next week - Johnsburg Quote Link to post Share on other sites
dumpystig Posted February 26, 2009 Report Share Posted February 26, 2009 N-S-E-W welcome back What is it you guys are looking for, re: English Speedcam warnings? Quote Link to post Share on other sites
N-S-E-W Posted February 26, 2009 Report Share Posted February 26, 2009 N-S-E-W welcome back Just visiting, don't want to get too far behind. Quote Link to post Share on other sites
BorisM Posted February 26, 2009 Author Report Share Posted February 26, 2009 N-S-E-W welcome back What is it you guys are looking for, re: English Speedcam warnings? You can get iGO to announce in any language "Speed camera ahead. Speed limit XXX" or "Red Light Camera ahead" etc., instead of just beeping. I have a set of scripts that do that but so far only in Russian... haven't converted them to work with English measures/announcements yet. Quote Link to post Share on other sites
dumpystig Posted February 26, 2009 Report Share Posted February 26, 2009 No prob Boris. Please give me your files, I speak fluent Russian haha! Sorry, don't mean to hijack this thread, but where should I look to re-install Bluetooth? I'm not sure if I'm looking in the right place. Edit: Think I've found it in APL. Should I just copy new APL or whole of MyFlashDisk into Avic? Quote Link to post Share on other sites
BorisM Posted February 26, 2009 Author Report Share Posted February 26, 2009 No prob Boris. Please give me your files, I speak fluent Russian haha! Sorry, don't mean to hijack this thread, but where should I look to re-install Bluetooth? I'm not sure if I'm looking in the right place. Hey, I could send you scripts, no problem Reinstall bluetooth? you mean the bluetooth files(Pioneer), or where to get to reinstall interface (described in the same place)? Quote Link to post Share on other sites
dumpystig Posted February 26, 2009 Report Share Posted February 26, 2009 Не уверенный точно, что я нуждаюсь в Boris, таким образом оба были бы хороши. Quote Link to post Share on other sites
BorisM Posted February 27, 2009 Author Report Share Posted February 27, 2009 Не уверенный точно, что я нуждаюсь в Boris, таким образом оба были бы хороши. Heh, not too bad, if kind google-translate-ish Pioneer's formware update page has both files and instructions, at least the US one... Pretty straighforward... Quote Link to post Share on other sites
Toxit Posted February 27, 2009 Report Share Posted February 27, 2009 Thanks guys. I have the faster, slower, pause and resume buttons working. The only thing I can't find out is how to hide the buttons when the simulation finishes. When I press the stop button everything works and all buttons are gone. But when the simulation is over, the buttons remain on the map screen untill I resimulate and press the stop button. Also, is there a way to show the current simulation speed on screen? Quote Link to post Share on other sites
BorisM Posted February 27, 2009 Author Report Share Posted February 27, 2009 Thanks guys. I have the faster, slower, pause and resume buttons working. The only thing I can't find out is how to hide the buttons when the simulation finishes. When I press the stop button everything works and all buttons are gone. But when the simulation is over, the buttons remain on the map screen untill I resimulate and press the stop button. Also, is there a way to show the current simulation speed on screen? Standard speed display code will work for simulation. To hide other buttons, replicate exactly what it does for Stop button. Quote Link to post Share on other sites
ill.die.trying Posted February 27, 2009 Report Share Posted February 27, 2009 hey borism, what do i need to get the route simulation, i have a couple of mods already so its hard to just change the entire ui_pioneer folder Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.