jnazarof Posted March 21, 2011 Report Share Posted March 21, 2011 This is because of Carver's nag NAV messages killer. It programs a click 2 seconds after AVIC booted up, and sometime it works (clicks on the message OK), and sometime it just clicks on the map. Good to know! Thanks! Quote Link to post Share on other sites
whalepirot Posted March 21, 2011 Report Share Posted March 21, 2011 Sounds awesome! Will this work on an F500BT? thanks. mike Quote Link to post Share on other sites
mrvicjr Posted March 23, 2011 Report Share Posted March 23, 2011 I need help please... I did all the steps with the Rar and Sd. Got into the testmode and started the download. Now when I did the transfer it didn't ask if I wanted to overwrite anything. It finished the whole download (20 minutes or so) it closed the little file process window and said unable to copy a file. Not sure which file it was. I then went into the "My Flash Drive" to see if the file was there and it was inside another file named "My Storage Device" and all the old files were still inside the "My Flash Drive" also. I'm thinking the old files should be deleted and the new files replace them. Should I delete all the old files and leave that one file in there (My Storage Device)? When I open the "My Storage Device" all the new files are inside. What should I do??? Any help would be appreciated! Quote Link to post Share on other sites
seanbushong Posted March 26, 2011 Report Share Posted March 26, 2011 when i do step 4 i guess it reads the files. up to 100% but that's it . it doesn't write an image . it doesn't tell me to reset. what am i doing wrong. i haven't been able to use my unit for weeks now. someone please help. Quote Link to post Share on other sites
freshADR Posted March 27, 2011 Report Share Posted March 27, 2011 I apologize if this was already solved but I have a problem loading Real-View Night scheme. I had to delete it the unit kept restarting. Any ideas? Thanks in advance. Edit: Got it to work. Been awhile since I messed with the nav Quote Link to post Share on other sites
dragonslayer33101 Posted March 29, 2011 Report Share Posted March 29, 2011 I need some help. I already had 3.0 installed and yesterday installed 3.1 and now whenever i start up the screen says Caution: Image may appear reversed. when i start driving it flashes that screen every 5 seconds or so. what could this be?? i'm going to try a fresh download and install but has anyone else had this happen??? Quote Link to post Share on other sites
dragonslayer33101 Posted March 30, 2011 Report Share Posted March 30, 2011 so apparently going back to 3.0 didn't work, but i figured out what happened. some how when i installed 3.1 it turned on the back-up camera (that i don't have) but for some reason it couldn't tell what direction i was going Quote Link to post Share on other sites
Danv Posted April 1, 2011 Report Share Posted April 1, 2011 Is this one still relevant ? Is it the most up-to-date, firmware / mods and stuff... Sorry I am still new and these kind of question should be in the FAQ.. lol there's one about the 2.0 but nothing about 3.X I could install this firmware into my F700 right ? Thanks! Quote Link to post Share on other sites
Chuck88 Posted April 1, 2011 Report Share Posted April 1, 2011 Is this one still relevant ? Is it the most up-to-date, firmware / mods and stuff... Sorry I am still new and these kind of question should be in the FAQ.. lol there's one about the 2.0 but nothing about 3.X I could install this firmware into my F700 right ? Thanks! This is relevant for the FW 2.0 to upgrade to FW 3.0201. But if you have FW 3.020x and want to have an all in one solution with MOD and other stuffs (see post #1), then you can install it. Otherwise, look at the Completed Mods section for the most up to date mods. Quote Link to post Share on other sites
brodie7838 Posted April 3, 2011 Report Share Posted April 3, 2011 When I attempt to copy the contents of "My Flash Disk" from the SDCARD to the AVIC, it tells me the contents are too large, and it does not copy all of the data. In the WINCE upgrade menu I am selecting "0=WINCE by SD/MMC (Format)". Am I missing something? The AVIC is stuck in a boot loop currently. Quote Link to post Share on other sites
Chuck88 Posted April 3, 2011 Report Share Posted April 3, 2011 When I attempt to copy the contents of "My Flash Disk" from the SDCARD to the AVIC, it tells me the contents are too large, and it does not copy all of the data. In the WINCE upgrade menu I am selecting "0=WINCE by SD/MMC (Format)". Am I missing something? The AVIC is stuck in a boot loop currently. Please search and read in this thread. You can try to delete a couple of maps from the CONTENT\map folder. Quote Link to post Share on other sites
achi10 Posted April 4, 2011 Report Share Posted April 4, 2011 EDIT: Nevermind. Found the search button. That thing rocks. Great up! Thanks! I have not looked through all 43 pages, but when I'm in 3D view, none of my street names/labels are showing up. Is this normal? It was there on v2.0 for me, but not it's not there. I can switch to 2D view, and the street names/labels show up just fine. Any ideas? Quote Link to post Share on other sites
Chuck88 Posted April 4, 2011 Report Share Posted April 4, 2011 Some other people are having this problem. Did you try to adjust the view distance by using the knob? Quote Link to post Share on other sites
FLZ22 Posted April 4, 2011 Report Share Posted April 4, 2011 ... Copy the entire contents of the RAR file except for the WINCEIMG.BIN and WINCEIMG.CKS to the root of SD card. For the two WINCE*.* files, I had to use the one I download from this link. http://www.rapidshare.ru/1206567The'>http://www.rapidshare.ru/1206567The one that came with the FX3.1 would not allow me to boot after I flash WinCE ... Has anybody succeeded in downloading from http://www.rapidshare.ru/1206567 ? As per the quoted post, it's specific for F500BT. This link times out and I've tried for several days now. Quote Link to post Share on other sites
dcu1976 Posted April 4, 2011 Report Share Posted April 4, 2011 Yes, please seed! I am on a slow connection(will seed back), and have been waiting for this torrent for a real long time, piratebay only show one seeder! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.