Stinkhammer Posted April 8, 2011 Report Share Posted April 8, 2011 How is it that noone has posted a useable, working link for the fx3.1? 43 pages and countless posts and this file is unavailble?? That seems ridiculous! There are no seeders for the torrent so why not up it to mediafire or something?! Secondly, it says thatthe TA 2009.6 map upgrade is included with this package but what about the 2010.6 maps as shown here?> http://avic411.com/index.php?/topic/29707-teleatlas-201006-north-america/ I don't want to seem ungreatful, because this forum and these threads are extremely helpful, but there seems to be no fx3.1 available. Thanks Quote Link to post Share on other sites
dcu1976 Posted April 10, 2011 Report Share Posted April 10, 2011 I have given up trying to get this torrent. Awaiting a newer version! Quote Link to post Share on other sites
toomtoomvroom Posted April 10, 2011 Report Share Posted April 10, 2011 What is up with you guys? I just downloaded the torrent and installed everything on my F900 and it worked perfect. The torrent is still good. It only took me 15 min to download it. Quote Link to post Share on other sites
superjorn Posted April 11, 2011 Report Share Posted April 11, 2011 i downloaded it 2 days ago and is currenty seeding with 1.3 Mbs...havent tried to install it yet since i need european maps first... Quote Link to post Share on other sites
letterman52 Posted April 11, 2011 Report Share Posted April 11, 2011 So I copied the files over and followed the directions, but now my deck goes to the Pioneer start up screen and then shuts off. HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Quote Link to post Share on other sites
letterman52 Posted April 11, 2011 Report Share Posted April 11, 2011 Can I just run the 2.0008 Software like I was going to do the upgrade again and will the deck go back to normal? Quote Link to post Share on other sites
FLZ22 Posted April 12, 2011 Report Share Posted April 12, 2011 So I copied the files over and followed the directions, but now my deck goes to the Pioneer start up screen and then shuts off. HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Can I just run the 2.0008 Software like I was going to do the upgrade again and will the deck go back to normal? Sounds like the WINCEIMG.BIN that was used to flash is not compatible with your device. Is it a F500BT ? If so, then you are have the same experience as me. I ended up flashing my F500BT back to 2.0006 (my unit is North America) with the WINCEIMG.BIN found in the official Pioneer update zip file. And then of course copy back the My Flash Disk folder from backup. Quote Link to post Share on other sites
letterman52 Posted April 16, 2011 Report Share Posted April 16, 2011 Ok. I got it to work. I just loaded up 3.0 like I was doing it for the first time. Everything upgraded fine. I will hold off on 3.1 until I am a bit more brave. Quote Link to post Share on other sites
papichulo6988 Posted April 16, 2011 Report Share Posted April 16, 2011 It most be mee but i Have try about 6 times the correct prosses and I cant it pass the boot screen.After i reboot the unit It will ask me to choose the language and region but it reboots and it never leaves the boot screen. Can any body help Please. Quote Link to post Share on other sites
Mathers Posted April 17, 2011 Report Share Posted April 17, 2011 It most be mee but i Have try about 6 times the correct prosses and I cant it pass the boot screen.After i reboot the unit It will ask me to choose the language and region but it reboots and it never leaves the boot screen. Can any body help Please. I have the same problem but instead of selecting a language and a region, I have to choose a language and then GPS voice. I get around the reboot issue by just clicking "Ok" and "Ok" at the bottom right of the screen. When I do this, it boots with no problems, if I select a language or gps voice then the system reboots. Fortunately I just want the defaults so there isn't an issue. I have a backup camera and can get the language screen to disappear sometimes by putting it into reverse a few times when the language screen is present. This does not seem to be as consistent as when I first did the update. Quote Link to post Share on other sites
dcu1976 Posted April 20, 2011 Report Share Posted April 20, 2011 Can anyone please seed this torrent, and/or put it up somewhere for download?! Quote Link to post Share on other sites
dcu1976 Posted April 21, 2011 Report Share Posted April 21, 2011 Today I'm on a T1 connection and still every torrent I have is moving except for one, can you guess which? I guess only a handfull of people actualy seed this torrent. Please seed! Thanks! Quote Link to post Share on other sites
RADRaze2KX Posted April 22, 2011 Report Share Posted April 22, 2011 I'm uploading the torrent I downloaded in less than 30 minutes TODAY... to my webhost... so you guys can stop griping about there not being any working links Oh yea hey, I'm new to the forums, just bought a used F900BT off eBay from a seller with 40,000+ sales and a 97%+ Feedback rating... I'll continue this intro elsewhere, and I'll post a working LINK when the upload finishes. Quote Link to post Share on other sites
Bass911 Posted April 22, 2011 Report Share Posted April 22, 2011 This is not working for me, and I'm not doing anything wrong! When I copy the My Flash Drive files, the screen becomes unresponsive when I try to go up 2 folders to paste it. It is just stuck on that same screen. Everything I touch on the screen is froze. It will not go past this step, and I've tried it over and over again. It works fine up until I get to this step. Can anyone help me fix it so I can put this thing up for sale? Quote Link to post Share on other sites
dcu1976 Posted April 22, 2011 Report Share Posted April 22, 2011 Thanks! I was hoping to get this today but I will get back on the T1 connection tomorrow hopefully your link will be ready I'm uploading the torrent I downloaded in less than 30 minutes TODAY... to my webhost... so you guys can stop griping about there not being any working links Oh yea hey, I'm new to the forums, just bought a used F900BT off eBay from a seller with 40,000+ sales and a 97%+ Feedback rating... I'll continue this intro elsewhere, and I'll post a working LINK when the upload finishes. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.