Hyperite Posted July 31, 2007 Author Report Share Posted July 31, 2007 Hmm...so I guess the answer is "maybe" Quote Link to post Share on other sites
whtcrxghst Posted July 31, 2007 Report Share Posted July 31, 2007 I have seen quite a few too My June unit was already updated from the factory. Quote Link to post Share on other sites
Perfectg Posted July 31, 2007 Report Share Posted July 31, 2007 I am having problems with getting the Z2 to update with the cd I made with hyperite's upload. When I download the file it automatically opens the roxio cd creator with no files. I tried burning the file to the cd with Roxio but i think this is the problem. Is the file a zip? I cant seem to open the download with the image. I have read every topic to make sure I tried everything before sounding like a loser. If some can please help let me know if i need to use a another software or something. I even tried burning the file on a CD-R and a DVD+R the dvdR says unreadable disc. I tried reseting it but it just keeps saying the same thing. Thanks Burn at slower speeds will also help Quote Link to post Share on other sites
TL Avic-Z2 Posted July 31, 2007 Report Share Posted July 31, 2007 Yea after reading other posts, I used Alcohol120% and this seemed to work. I was burning the CD as a Data instead of an image that was the problem. I will be doing the 2-wire bypass later. Thanks guys for all your time and help. VICTORY!!! Quote Link to post Share on other sites
tkk Posted July 31, 2007 Report Share Posted July 31, 2007 yup...I got my to work with out loading the disk....date on the pioneer "June".... I just did the 2 wire bypass......I gotten about 600 mile today...still work fine....Thanks for reply.... Quote Link to post Share on other sites
IndyCharger06 Posted August 1, 2007 Report Share Posted August 1, 2007 Wow, I'm so glad this is true. My Z2 was stolen 3weeks after install. My replacement arrives tomorrow, goes in Thurs. Question: Does this bypass remove any functions of the Z2? (i.e. the gyros or something served a function like in tunnels.) Quote Link to post Share on other sites
whtcrxghst Posted August 1, 2007 Report Share Posted August 1, 2007 Does not remove any functions Quote Link to post Share on other sites
mike1646 Posted August 1, 2007 Report Share Posted August 1, 2007 My z2 worked for 40 miles now it has the brake warning again, whats up with that? When cheking the settings it says that the parking brake is on. Quote Link to post Share on other sites
chane Posted August 1, 2007 Report Share Posted August 1, 2007 Went on an 800 mile round trip over the weekend and all worked great! Quote Link to post Share on other sites
shotgun_customs Posted August 1, 2007 Report Share Posted August 1, 2007 My z2 worked for 40 miles now it has the brake warning again, whats up with that? When cheking the settings it says that the parking brake is on. It sounds like the other pin is not grounded. Check to make sure that the pin has not backed out of the connector. Quote Link to post Share on other sites
TL Avic-Z2 Posted August 1, 2007 Report Share Posted August 1, 2007 I got the update to work, now the z2 doesnt recognize the back up camera. How can I get it to work again? Thanks Quote Link to post Share on other sites
brandon Posted August 1, 2007 Report Share Posted August 1, 2007 I got the update to work, now the z2 doesnt recognize the back up camera. How can I get it to work again? Thanks Ive read of this before, I believe someone else had to reassign the output to the camera and then it worked again. If memory serves, the low level reset causes the z2 to no longer have the camera assigned to that output. Should be in your settings somewhere. Pretty sure thats how it went. I think that post is somewhere in this thread too. Quote Link to post Share on other sites
Hyperite Posted August 1, 2007 Author Report Share Posted August 1, 2007 I got the update to work, now the z2 doesnt recognize the back up camera. How can I get it to work again? Thanks Check your settings to turn it on. And you might have to change from high to low on the back-up signal. Quote Link to post Share on other sites
drober30 Posted August 1, 2007 Report Share Posted August 1, 2007 I got the update to work, now the z2 doesnt recognize the back up camera. How can I get it to work again? Thanks Ive read of this before, I believe someone else had to reassign the output to the camera and then it worked again. If memory serves, the low level reset causes the z2 to no longer have the camera assigned to that output. Should be in your settings somewhere. Pretty sure thats how it went. I think that post is somewhere in this thread too. Correct, a reset will cause the camera to not show. You have to turn it back on in the AV settings. Quote Link to post Share on other sites
Kawieracer27 Posted August 1, 2007 Report Share Posted August 1, 2007 Thanks to everyone who worked on the bypass, im redoing my truck right now so i cant try it yet, but I have the iso burned and ready, and the bypass wired for when the truck goes back together. For those of You who are getting a .rar file when downloading, the reason may be due to the fact that winrar by default associates itself with .iso files, it probably is an .iso, just that it automatically opens in winrar. Try right clicking it and opening it with another program or opening winrar and changing the files it associates with (uncheck .iso i believe). Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.