Zorn Posted November 10, 2009 Report Share Posted November 10, 2009 Guys - I have downloaded the x910bt.zip file which opens as IDT_v3.5. Are these instructions posted in this post the instructions I need to do the install? Thanks in advance! I need to know this too. Thanks! read the first post in this thread, those are the 3.0 upgrade instructions. Will this only install the 3.0 firmware, or does it update the maps as well? Quote Link to post Share on other sites
terron Posted November 10, 2009 Report Share Posted November 10, 2009 the first post in this thread describes how to update the WinCE image, update the Pioneer software and lastly update the maps to 2008.10. All that together is considered the 3.0 update. Quote Link to post Share on other sites
speed Posted November 11, 2009 Report Share Posted November 11, 2009 Please help I followed the instructions from the OP, but one I preform the last step the splash screen comes on and then the screen goes blank. I was confused on step 12, so maybe I did something wrong. I have no mods to the system. It is the f700bt Any ideas? Thanks Quote Link to post Share on other sites
nalaz4 Posted November 12, 2009 Report Share Posted November 12, 2009 Do someone know where to find the european Install guide??????????? Is that for all units or only EU or US? The torrent is for US+Canada. Quote Link to post Share on other sites
adamtaylorpcb Posted November 12, 2009 Report Share Posted November 12, 2009 Never mind, got it working thanks again Quote Link to post Share on other sites
mcuinto Posted November 13, 2009 Report Share Posted November 13, 2009 It seens that the torrent file is out of work! It opens a page with a lot of numbers and corrupted data... anyone has another link?!?!?! and this guide will work clearly to F500BT ? thanks !!! =] Quote Link to post Share on other sites
mga Posted November 14, 2009 Report Share Posted November 14, 2009 I did the procedure, the unit starts and in the menu (route, contacts & audio) a box in the bottom says 'system startup in progress' and then it chrashes and restarts the system after app. 5 min... Anyone tried the same, who can help me fix this??? (im using a EU unit). Pls help Quote Link to post Share on other sites
nalaz4 Posted November 14, 2009 Report Share Posted November 14, 2009 I´m looking for the 3.0 firmware for an european unit also........but I think this post is for USA/canada units............ I did the procedure, the unit starts and in the menu (route, contacts & audio) a box in the bottom says 'system startup in progress' and then it chrashes and restarts the system after app. 5 min... Anyone tried the same, who can help me fix this??? (im using a EU unit). Pls help Quote Link to post Share on other sites
jbserra Posted November 14, 2009 Report Share Posted November 14, 2009 Worked like a charm. Thanks OP! Quote Link to post Share on other sites
smelly Posted November 15, 2009 Report Share Posted November 15, 2009 Will this work on the F500BT? Quote Link to post Share on other sites
laci102 Posted November 15, 2009 Report Share Posted November 15, 2009 Please help: I've got Pioneer AVIC f900bt apparatus (Hungary), her 2005 version. how to replace version 3.0? I downloaded a crack version of this page, you may not be well connected. Please help: someone put up a good torrent site in the 3.0 version, and PLEASE send the link. And describe how it can transform the current version of 2:05 to version 3.0. Thank you for your help! Quote Link to post Share on other sites
wiretap Posted November 15, 2009 Report Share Posted November 15, 2009 Can someone hop on the seed for the torrent? I will seed it for everyone after I get the whole thing. I have a file server that is up 24/7 with a 2mbit upload. Quote Link to post Share on other sites
wiretap Posted November 15, 2009 Report Share Posted November 15, 2009 Ok, I'm on the seed now. Through the magic of the internets, it appeared on my hard drive somehow. So.. download. go go go!!! Quote Link to post Share on other sites
EZ44 Posted November 16, 2009 Report Share Posted November 16, 2009 I need HELP badly! I tried the upgrade, ran into an error and now the unit just turns off after the Pioneer splash screen. I was able to perform all steps up to copying the 'My Flashdisk' contents over. At that point it kept giving me errors such as cannot copy Canada.3dl, USA_Arizona.3dl, another, another... etc. After clicking cancel multiple times I was finally able to stop the copy process. I thought perhaps I had corrupt files so I switched off the car and went to re-download the files. After loading up the SD card again I went back to the car and that's when I noticed it was turning off after the splash screen. This wouldn't allow me to boot into testmode/WinCE so I tried starting all over again from the beginning. It still doesn't work and now when I try to do the Menu-Map-Eject-Reset it doesn't even ask me for the Up-Up-Down-Menu-Left-Right password, it just goes on to the menu. Not sure if it is supposed to do that because I performed the initial part of the upgrade successfully or if that points to another issue. Is there any way I can fix this or format the unit in some way and get it back to 2.0? Any and all help is greatly appreciated. Thanks. Quote Link to post Share on other sites
abb1 Posted November 16, 2009 Report Share Posted November 16, 2009 Did you use the hacked version or the official update? I had the same problem when I installed the official update. As soon as I put the hacked version in, all was good. From what I see, is that the official version does not format the flash disk whereas the hacked version does. You could have some older previous mods conflicting with the update. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.