diaftia Posted March 15, 2010 Author Report Share Posted March 15, 2010 N-S-E-W wrote: Or you can add to the sys.txt file: [poi] use_multi_poi_icon=0 Can I also edit the sys.txt and change default lat & long to my location as well as default day and night schemes to those of my choosing?? As far as I know the Long and Lat setting in sys.txt is only the start location that the AVIC will boot to when it has no GPS lock. You can use whatever scheme you like as long as the files are in place to support them (like DPDurst). All standard schemes should work fine. Alex Quote Link to post Share on other sites
69sixpackbee Posted March 15, 2010 Report Share Posted March 15, 2010 I tried removing the "zoom=1000" from the code string for the signposts and yet they still show up small. WHat gives?Also, regardless of the transparency settings, on or off, the freeway signs are still transparent and hardly visible. Any thoughts? Been reading here: viewtopic.php?f=34&t=26901 Maybe this is whee the demons lie... Thanx, Bud Freeway signs are limited in width. Adjust the W= setting and it will make them larger. Transparency is for the navigation backgrounds not the freeway signs. Working on that put all changes to the signposts require a reboot. Alex Thanx, Alex, N-S-E-W, et. al !! Quote Link to post Share on other sites
ttray14 Posted March 16, 2010 Report Share Posted March 16, 2010 Would this mod work on the x910bt? This the unit I have installed in my F-150. Pm me if you have the answer.Thanks Yup. Works great on my x910 How do I go about installing this mod? Quote Link to post Share on other sites
jokernl Posted March 16, 2010 Report Share Posted March 16, 2010 Probably generic problem. But anyone experiencing a problem in destination time (ETA)? Mine adds one hour to the travel time. Puzzles me (time on screen and satt is ok). Any ideas or is it a daylight savings problem which will solve itself in a few weeks? Quote Link to post Share on other sites
Segler1963 Posted March 17, 2010 Report Share Posted March 17, 2010 Probably generic problem. But anyone experiencing a problem in destination time (ETA)? Mine adds one hour to the travel time. Puzzles me (time on screen and satt is ok).Any ideas or is it a daylight savings problem which will solve itself in a few weeks? Same for me, started 2 days ago GPS time is correct, time do destination is correct, but ETA is one hour later. So when you are just 1 min away from your destination at noon, it still shows an ETA of 1:00 pm Jörg Quote Link to post Share on other sites
avic_weo Posted March 17, 2010 Report Share Posted March 17, 2010 Same here, but not to worry: I also had this a few months ago, and again now. Probably has to do with discrepancy between Europe and US DST settings. Annoying, but harmless. Weo Quote Link to post Share on other sites
avic_weo Posted March 17, 2010 Report Share Posted March 17, 2010 I do have another problem, with the Europe implementation of this mod. In Belgium, our highway signs have a blue background, as opposed to green in the US. Merten has changed this, but apparently on highway intersections this reverts back to white on green. Anybody has a clue where this ambiguity comes from? Weo Quote Link to post Share on other sites
Ben NR#1 Posted March 17, 2010 Report Share Posted March 17, 2010 Hi all, I have installed the mod this afternoon and was overwelmed about all the settings i made.. So thats great . Good job to those involved in developing this. But i actually have a few question. I used to have nice green way pointers on the map, Instead of the bouncing black ones. Is there any option to change that back. Or maybe restore the whole 3D part (without the horizon) as it was a lot clearer and the map ran a lot smoother. And the highway signs now show the names next to each other instead of under. Is this normal ? Now i also have an issue with my GPS. While standing still the maps start to spin, like it doesnt no wich direction im facing. I used to have this problem before while running firmwarre 2.0 after mocing to 3.0 this was solved. Anybody has an idea on how to solve this ? Quote Link to post Share on other sites
ovalball Posted March 17, 2010 Report Share Posted March 17, 2010 Hi all, I have installed the mod this afternoon and was overwelmed about all the settings i made.. So thats great . Good job to those involved in developing this. But i actually have a few question. I used to have nice green way pointers on the map, Instead of the bouncing black ones. Is there any option to change that back. Or maybe restore the whole 3D part (without the horizon) as it was a lot clearer and the map ran a lot smoother. And the highway signs now show the names next to each other instead of under. Is this normal ? Now i also have an issue with my GPS. While standing still the maps start to spin, like it doesnt no wich direction im facing. I used to have this problem before while running firmwarre 2.0 after mocing to 3.0 this was solved. Anybody has an idea on how to solve this ? Hi Ben.Regarding the pointers,have a look in sys.txt and see that you have a line something like this.If yours is set to =0(ie OFF)change it to =1(ON) [3d] show_guidance_arrows=1 show_guidance_strip=1 Good Luck! Quote Link to post Share on other sites
Ben NR#1 Posted March 17, 2010 Report Share Posted March 17, 2010 Hi Ovalball, Thanks for the suggestion, that will probalby solve the issue. Your sure however that both should be set to =1 ? So then it would be : show_guidance_arrows=0 show_guidance_strip=1 I also noticed this is different from a defualt sys.txt. Diafta mod : [gps] port=7 baud=9600 default_latitude="34.05116" default_longitude="-118.24258" Original : [gps] port=7 baud=9600 default_latitude="0.0" default_longitude="0.0" You think this could solve my gps issue ? Thanks . Quote Link to post Share on other sites
abb1 Posted March 18, 2010 Report Share Posted March 18, 2010 You think this could solve my gps issue ? Thanks . This is a hardware issue, not a software one. The GPS which is attached to your AVIC gets the signals from satellites. The direction that you are going dictates when the vehicle is in motion so the GPS can determine which direction you are going. When the car is motionless, the GPS cannot predict which direction you will be travelling until you go in motion. That is why when you are stopped, the map spins and is in an off direction until you put the car in motion again. I have had this forever, no matter what mapping software I had. The earlier models were not so bad because they had a 1-2 sec lag time, so it would not start to go off course until 2 sec after you are stopped. The AVIC's though are very accurate! Quote Link to post Share on other sites
Harvey_Gordon Posted March 18, 2010 Report Share Posted March 18, 2010 Just thought I'd add my two cents. I had this spinning map problem. It bugged me. Stopped is stopped. It SHOULDN'T move until I do, even if it's pointing wrong. After all, if I've just pulled up to a red light and stopped, it brought me here, now wait till I move. In your settings you should find a 'Keep Position On Road.' Turn it off. The spinning stops. And when you go off road (into a plaza or such) the unit doesn't go crazy trying to keep you on a road. I just like it better. Give it a shot. Quote Link to post Share on other sites
ovalball Posted March 18, 2010 Report Share Posted March 18, 2010 Hi Ovalball, Thanks for the suggestion, that will probalby solve the issue. Your sure however that both should be set to =1 ? So then it would be : show_guidance_arrows=0 show_guidance_strip=1 I also noticed this is different from a defualt sys.txt. Diafta mod : [gps] port=7 baud=9600 default_latitude="34.05116" default_longitude="-118.24258" Original : [gps] port=7 baud=9600 default_latitude="0.0" default_longitude="0.0" You think this could solve my gps issue ? Thanks . Ben.I have both mine set to=1 because i want to see both the guidance strip and the cursur.If you only want the guidance strip then set the other value to =0 Quote Link to post Share on other sites
Ben NR#1 Posted March 18, 2010 Report Share Posted March 18, 2010 Ok thanks, im going to try that out this afternoon. But now i also noticed another problem. My gps location show about 15 meter off from my curent lcoation. So i always see my pointer next to the road instead of on it.. anybody else experiencing this ? Quote Link to post Share on other sites
diaftia Posted March 18, 2010 Author Report Share Posted March 18, 2010 How do I go about installing this mod? Read the first post. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.