Dogluvr Posted July 24, 2009 Report Share Posted July 24, 2009 Can we not totally fuck up this thread with questions that would be better suited for Google, circa 2002? thanks. Hey Danno, Is it that serious of a thing. All I did was ask a question and it was answered. I thought the purpose of this forum was to ask questions regardless of how simle the may be to others. I rearly post, ask question or anything on this forum. I normally just read and go from there. You may be well versed in this area, I if thats the case hats off to you. Its no need to cause someone not to want to visit the forum again because of comments like you are making. Well said midnight. I belong to several other forums but this is the only one that I belong to where newbies are made to feel so intimidated. If you don't want to read or answer a question, then DON'T!!! But there is no reason to be nasty! I, for one, would 100 times more rather see a question asked many times, than to read even 1 negative, put down response. The information and brains in this forum are so fantastic and I can't even begin to tell you how much I've learned. But if we ALL had the knowledge, they wouldn't be any reason for the forum, right???? Quote Link to post Share on other sites
destln3d Posted July 24, 2009 Report Share Posted July 24, 2009 test ur sd card full of music and see if it hangs? That's what i'm experiancing? well i tried to load the old firmwire from the pioneer site and all I get are errors...so Im going to reload the 3.0 on it once again and hopefully I dont get the same issue for the 4th time..if I do Ill try what you said and see if that works...did it work for you??? Quote Link to post Share on other sites
destln3d Posted July 24, 2009 Report Share Posted July 24, 2009 okay I see post saying that you might have the old testmode files and you need to replace it with the new ones...where do you get the new ones??? and also testmode...thats the window base OP system thats boots up correct?? Quote Link to post Share on other sites
crilleym Posted July 24, 2009 Report Share Posted July 24, 2009 okay I see post saying that you might have the old testmode files and you need to replace it with the new ones...where do you get the new ones??? and also testmode...thats the window base OP system thats boots up correct?? Look here....viewtopic.php?f=34&t=25751&start=0 You will find everything you need. Remember to back up first. Quote Link to post Share on other sites
VR6_MTL Posted July 24, 2009 Report Share Posted July 24, 2009 WoW.. i just upgrade to version 3.0 followed all step on the 1st page .. went like a breeze... and about vers.3.0 alot faster.. but my house in canada still not there.. (new develloppement) Now .. need some mod on that.. Quote Link to post Share on other sites
gjas18 Posted July 24, 2009 Report Share Posted July 24, 2009 Thanks! How abot the street names in 3d without having to zoom in all of the time? 2d has them all of the time? Just set the Smart Zoom to be lower in the Navigation Settings. Shouldn't have to do that... thats not how iGo 8.0 treated 3d. It displayed street names fine in 3D Quote Link to post Share on other sites
destln3d Posted July 24, 2009 Report Share Posted July 24, 2009 i tried everything...followed the instructions down to the T many times...this sucks cause now I have to take it in to get fixed which will be over a 100.00...i guess i shouldnt have been so cheap and bought the update even though it should be for free...does anyone know how to load the old firmware that you get from the pioneer site without getting errors??? Quote Link to post Share on other sites
crilleym Posted July 24, 2009 Report Share Posted July 24, 2009 i tried everything...followed the instructions down to the T many times...this sucks cause now I have to take it in to get fixed which will be over a 100.00...i guess i shouldnt have been so cheap and bought the update even though it should be for free...does anyone know how to load the old firmware that you get from the pioneer site without getting errors??? Did you backup your unit first? If you did, all you have to do is copy your entire myflashdiskback to your unit. If you didn't, you made a big mistake. There may be someone on this forum that has a full backup somewhere. You will have to look and search. Quote Link to post Share on other sites
hanibal Posted July 24, 2009 Report Share Posted July 24, 2009 i tried everything...followed the instructions down to the T many times...this sucks cause now I have to take it in to get fixed which will be over a 100.00...i guess i shouldnt have been so cheap and bought the update even though it should be for free...does anyone know how to load the old firmware that you get from the pioneer site without getting errors??? Did you backup your unit first? If you did, all you have to do is copy your entire myflashdiskback to your unit. If you didn't, you made a big mistake. There may be someone on this forum that has a full backup somewhere. You will have to look and search. here you go!! ftp://www.turboss.com Username: avicuser Password: Avic411 Quote Link to post Share on other sites
destln3d Posted July 24, 2009 Report Share Posted July 24, 2009 i tried everything...followed the instructions down to the T many times...this sucks cause now I have to take it in to get fixed which will be over a 100.00...i guess i shouldnt have been so cheap and bought the update even though it should be for free...does anyone know how to load the old firmware that you get from the pioneer site without getting errors??? Did you backup your unit first? If you did, all you have to do is copy your entire myflashdiskback to your unit. If you didn't, you made a big mistake. There may be someone on this forum that has a full backup somewhere. You will have to look and search. here you go!! ftp://www.turboss.com No I didnt back it up..didnt know how to. now how do i use it...do I put all the rar files un-zip on the flask disk?? or are they loaded up individual??...I appreicate you guys trying to help me out on this..Im a noob when it comes to the stuff.. I thought by following the instruction it would be that easy but I guess either Im not doing something right or my system simply doesnt like the update. I also see that you have the 3.0.1 on there...can I just use that one??? Quote Link to post Share on other sites
FTL83 Posted July 24, 2009 Report Share Posted July 24, 2009 No I didnt back it up..didnt know how to. now how do i use it...do I put all the rar files un-zip on the flask disk?? or are they loaded up individual??...I appreicate you guys trying to help me out on this..Im a noob when it comes to the stuff.. I thought by following the instruction it would be that easy but I guess either Im not doing something right or my system simply doesnt like the update. I also see that you have the 3.0.1 on there...can I just use that one??? Don't worry we all get problems. I have tried the load 3 times. The 3rd time I got it working but had no navi setting or system setting. I tried to update to 3.01 to see if it would work and now my unit is resetting itself every few minutes... back to the drawing board. Quote Link to post Share on other sites
rodman1919 Posted July 24, 2009 Report Share Posted July 24, 2009 hey just a question, should i update WITH format or WITHOUT format if i have a few mods put on my V2 at the moment? because i have read many people saying without the format worked for them, and others saying it did with the format, but i dont know which i should do because ive added about 2 or 3 mods since i got my unit a few weeks ago. which is better? thanks Quote Link to post Share on other sites
bitman Posted July 24, 2009 Report Share Posted July 24, 2009 Can we not totally fuck up this thread with questions that would be better suited for Google, circa 2002? thanks. Hey Danno, Is it that serious of a thing. All I did was ask a question and it was answered. I thought the purpose of this forum was to ask questions regardless of how simle the may be to others. I rearly post, ask question or anything on this forum. I normally just read and go from there. You may be well versed in this area, I if thats the case hats off to you. Its no need to cause someone not to want to visit the forum again because of comments like you are making. Well said midnight. I belong to several other forums but this is the only one that I belong to where newbies are made to feel so intimidated. If you don't want to read or answer a question, then DON'T!!! But there is no reason to be nasty! I, for one, would 100 times more rather see a question asked many times, than to read even 1 negative, put down response. The information and brains in this forum are so fantastic and I can't even begin to tell you how much I've learned. But if we ALL had the knowledge, they wouldn't be any reason for the forum, right???? i think most of the times it's better to start a new topic instead to poisoning an existing tread also i see people with only 1 or 2 posts joint the forum within 1 day and asking a question what's already being discussed many times and could easily being found if they just searched the forum bt Quote Link to post Share on other sites
Dogluvr Posted July 24, 2009 Report Share Posted July 24, 2009 Hey Danno, Is it that serious of a thing. All I did was ask a question and it was answered. I thought the purpose of this forum was to ask questions regardless of how simle the may be to others. I rearly post, ask question or anything on this forum. I normally just read and go from there. You may be well versed in this area, I if thats the case hats off to you. Its no need to cause someone not to want to visit the forum again because of comments like you are making. Well said midnight. I belong to several other forums but this is the only one that I belong to where newbies are made to feel so intimidated. If you don't want to read or answer a question, then DON'T!!! But there is no reason to be nasty! I, for one, would 100 times more rather see a question asked many times, than to read even 1 negative, put down response. The information and brains in this forum are so fantastic and I can't even begin to tell you how much I've learned. But if we ALL had the knowledge, they wouldn't be any reason for the forum, right???? i think most of the times it's better to start a new topic instead to poisoning an existing tread also i see people with only 1 or 2 posts joint the forum within 1 day and asking a question what's already being discussed many times and could easily being found if they just searched the forum bt bt, point taken - and this is the wrong forum for this discussion!!! see here: viewtopic.php?f=15&t=25943 Quote Link to post Share on other sites
bigdaddy496 Posted July 24, 2009 Report Share Posted July 24, 2009 the torrent link in the first post doesnt work Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.